Used Machine Tools in Bavaria, Germany

Trusted Seller
2013 ALZMETALL AX 3/S
- Manufacturer: Alzmetall
- Model: AX3
- Throat depth: 293 mm
- Drilling diameter: 32 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Spindle taper mt: MK 3 | Spindle speed: 160 - 2250 rpm. | Throat: 293mm | Column diameter: 115mm | Spindle s...
Günzburg, Germany
Trusted Seller
IXION BT 15 GLE
- Manufacturer: Ixion
- Model: BT 15
- Throat depth: 215 mm
- Drilling diameter: 15 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Throat: 215mm | Thread: M2 - M10 | Thread depth max.: 60mm | Spindle: MK 2 | Bore depth: 90mm | Column diame...
Günzburg, Germany
1998 Geka RM 50 rotary machine
- Manufacturer: Geka
Used Geka three-roll rotary cutter with folding groove and wire insertion grooves. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perf...
Hohenbrunn, Germany
1970 Combination rounding and beading machine 1000mm
- Manufacturer: Beutler
Used 3-roll bending machine, with beading device 1080mm, bar diameter 14mm, Machine is sold as is, without warranty.
Hohenbrunn, Germany
1998 Prinzing RM 52/103 rotary machine
- Manufacturer: Prinzing
Used Prinzing 3-roll rolling machine, with wire insertion grooves, folding groove, back roller manual feed, wheel with scale. The machine will be professionally repaired, tested, and cleaned, and will then be f...
Hohenbrunn, Germany
2017 Schröder AKV swivel bending machine
- Manufacturer: Schroeder
Used Schröder swing bending machine with pneumatic bending jaw support (Compressed air required) with manual Knoll roller shear, with Knoll profiling and closing head The machine will be professionally repaired...
Hohenbrunn, Germany
1987 Biegemaster BMTH long bending machine
- Manufacturer: Biegemaster
The used 8-meter Biegemaster long-reach bending machine offers a robust solution for the precise bending of sheet metal over long lengths. The new control system with memory and adjustable bending parameters ensu...
Hohenbrunn, Germany
Trusted Seller
Auction
INDEX V200 CNC Vertical Lathe with Siemens 840C Control
- Manufacturer: Siemens
With Collet Chuck. Maximum Spindle Speed 2,500rpm. With Gang Tooling. S/No.100588 2004).
Schweinfurt, Germany
Beading machine Fasti 401/63/1.25
- Manufacturer: Fasti
Used manual Fasti beading machine with stop plate and 3 sets of rollers. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be performed.
Hohenbrunn, Germany
2005 bending machine Bernardo angle pincher 100
- Manufacturer: Bernardo
Description used Bernado angle former 100, ideal for repair shops and blacksmiths for exact cold and hot bending of flat, round and square rods, sturdy construction for bolting to the workbench, infinitely adjust...
Hohenbrunn, Germany
2012 Schröder MAK III swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
Used Schröder MAK III swing bending machine, manual bending jaw adjustment, foot pedal, motorized backgauge. The machine has been professionally repaired, inspected, and cleaned and is fully functional. A test ...
Hohenbrunn, Germany
1981 Swivel bending machine RAS 64.25
- Manufacturer: RAS
Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...
Hohenbrunn, Germany
2021 Schechtl MAF 400 swivel bending machine
- Manufacturer: Schechtl
Used Schechtl swing bending machine with the following equipment: - 1 sharp guide bar 20°, offset, 1 mm radius for the upper beam - 1 insert rail each 10/100 mm and 24/100 mm for the bending beam - 2 foot switc...
Hohenbrunn, Germany
1998 round bending machine Coil-Tec SM
- Manufacturer: Coil-Tec
Round bending machine, with U-frame, folding nut, mobile Machine is repaired, inspected, cleaned by a professional and is then fully functional. Test run is performed.
Hohenbrunn, Germany
1993 Schröder MAK II swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
Used Schröder motor-driven bending machine, with motorized backgauge, manual bending jaw lowering, foot switch. A new control unit is currently being installed. The machine is being professionally repaired, tes...
Hohenbrunn, Germany