Used Welex in Illinois, USA

WELEX 6″ EXTRUDER SCREW 12347

Welex 6″ extruder screw, S/N JF05444-000, 32:1 L/D, 2 stage, 216″ overall length.

6″ WELEX EXTRUDER SCREW 12350

• Manufacturer: Welex

6″ Welex extruder screw, S/N 144812, 32:1 L/D, 2 stage 216″ overall length. 9″ long x 1.5″ wide keyway.

WELEX 6″ EXTRUDER SCREW 12351

• Manufacturer: Welex

Welex 6″ extruder screw, S/N 24-0138, 38:1 L/D, 2 stage, 252.5″ overall length. Keyway is 9″ long x 1.5″ wide.

Welex High Efficiency Horizontal Cooler Mixer – 1200L, Stainless Steel, 20 HP

• Manufacturer: Welex

51816001 Used Welex High Efficiency Horizontal Cooler / Mixer. Model 1200HC, 1200 Liter Total Capacity, 316 Stainless Steel Vessel and Plows, Chrome Plated Shaft. Typical rate 2400 - 4000 lbs per hour. Approximat...

WELEX TWO STAGE 4.5″ EXTRUDER 12344

• Manufacturer: Welex

Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 180359.

WELEX 4.5" EXTRUDER SCREW 12343

• Manufacturer: Welex

Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 1803592, 36:1 L/D.

WELEX 4.5″ EXTRUDER SCREW 12730

Welex 4.5″ extruder screw, no S/N, single stage, double spiral, chrome plated, 24:1 L/D. 150″ long.

NEW / UN WELEX 4.5 12346

• Manufacturer: Welex

New chrome plated Welex 4.5″ extruder screw, S/N 18079. 36:1 L/D, 8″ long x 1″ wide, keyway 190.5″ overall length.

WELEX 2″ 24:1 L/D EXTRUDER 17438

• Manufacturer: Welex

Welex model 200-24/1, 2″ 24:1 L/D extruder with a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 50″ centerline height. Gearbox is a Koellmann Gear and is belt driven by a 20 ...

WELEX 6″ 36:1 L/D 500 18830

• Manufacturer: Welex

One (1) used Welex model 6.0 36D 6″ 36:1 L/D extruder. S/N 6492. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate 66″ center line height. Koellman model Unex 8.13 gea...

WELEX 2″ 24:1 L/D CO-EXTRUDER 17576

• Manufacturer: Welex

One (1) used 2″ 24:1 L/D Welex co-extruder. Water cooled. Missing motor, drive panel, and pedestal. Last used on a sheet line.

WELEX 3.5″ 30:1 L/D 150 17954

• Manufacturer: Welex

One (1) used Welex 3.5″ 30:1 L/D extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69″ center line height. Center line height can be reduced approximately 8″ by removing...

Welex 3.5" 30:1 L/D Extruder – 150 HP, Vented Barrel, Melt Pump & Screen Changer

• Manufacturer: Welex

10755146 Used Welex 3.5" 30:1 L/D Extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69" center line height. Center line height can be reduced approximately 8" by removin...

Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel

• Manufacturer: Welex

54129004 Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel. 1520 RPM max. screw speed. Electric heated, air cooled barrel. Vented barrel. 57" barre...

WELEX 54″ 3-ROLL DOWN STACK 18834

• Manufacturer: Welex

One (1) used 54″ Welex cooling and polishing stand having three (3) chrome plated rolls mounted in a vertical arrangement for down stack operation at a 66″ center-line height. S/N 6493. Model 12x24x24 Compact Tak...