- Trusted Seller
Wele ML-532Z4 CNC 5-Face Double Column Machining Center
used
- Manufacturer: Wele
- Spindle Taper: BBT50
FANUC 0iMF Plus CNC Control (15" LCD) 60 Position Automatic Tool Changer Auto head storage: 90 degree head (Auto head changing, auto tool changing, C axis auto 5゚indexing) Universal head (Auto head changing, ...
Marietta, GA - Trusted Seller
2012 Wele MG-530 CNC Bridge Type Machining Center
used
- Manufacturer: Wele
- Spindle Taper: BT #50
- Control: Fanuc 31i-MB
Features: Fanuc 31iMB CNC Control 32-Station Automatic Tool Changer Equipped With: Fanuc 31iMB CNC Control 32 Station Automatic Tool Changer 35 HP Spindle Motor X/Y/Z Axes Linear Scale Extension Head Universal Head
Melville, NY - Trusted Seller
2015 Wele HB1620-130 CNC Horizontal Boring Mill
used
- Manufacturer: Wele
- Model: HB1620-130
- Spindle Diameter: 5.12"
- Control: Fanuc OiMD
Features: FANUC OiMD CNC Control 60-Station Automatic Tool Changer Built In Rotary Table 0.001 table indexing (Full B-axis) Chip Conveyor Equipped With: FANUC OiMD CNC Control 60-Station Automatic Tool Changer Bu...
Melville, NY - Trusted Seller
2020 Toyoda Wele HB1620-130 CNC Boring Mill
used
- Manufacturer: Wele
- Model: HB1620-130
- Spindle Diameter: 5.11"
- Control: Fanuc Oi-MF
Features: Machine Was Installed New in 2023 917 Run Time Hours Fanuc Oi-MF Plus CNC Control 78" x 63" B-Axis Rotary Table 80-Station Automatic Tool Changer Equipped With: Fanuc Oi-MF Plus CNC Control 78" x 63" B-...
Melville, NY - Trusted Seller
2018 Wele HB1620-130 CNC Horizontal Boring Mill
used
- Manufacturer: Wele
- Model: HB1620-130
- Spindle Diameter: 5.12"
- Control: Fanuc OiMF
Features: FANUC OiMF CNC Control 60-Station Automatic Tool Changer Built In Rotary Table 0.001 table indexing (Full B-axis) Centralized Lubrication System Flood Coolant System Rigid Tapping Chip Conveyor Equipped...
Melville, NY - Trusted Seller
WELE 5.12" CNC HORIZONTAL TABLE TYPE BORING MILL with Heidenhain control Brand New
new
- Manufacturer: Wele
- Model: HB1620-130
Description Equipped with the Following Features Spindle Size|5.12" X-Horiz Tvl of Table|157" Y-Vert Tvl of Head|82" Power|35 hp RPM|2,500 RPM Table-W|78" Table-L|63" Spindle Tvl.|27.6" Control|CNC (Heidenhain TN...
Mississauga, Canada - Trusted Seller
WELE 5.12" CNC HORIZONTAL TABLE TYPE BORING MILL with Fanuc Control Brand New
new
- Manufacturer: Wele
- Model: HB1620-130
Description Equipped with the Following Features Spindle Size|5.12" X-Horiz Tvl of Table|157" Y-Vert Tvl of Head|82" Power|35 hp RPM|2,500 RPM Table-W|78" Table-L|63" Spindle Tvl.|27.6" Control|CNC (FANUC 31iMB) ...
Mississauga, Canada - Trusted Seller
2014 WELE UA-2090
used
- Manufacturer: Wele
SPECIFICATIONS: CLAMPING AREA ........................84.6" X 35.4" X-AXIS TRAVEL (TABLE MOVEMENT)..........78.7" Y-AXIS TRAVEL (TABLE MOVEMENT)..........35.4" Z-AXIS TRAVEL (HEADSTOCK MOVEMENT)......27.5" D...
Santa Ana, CA WELE LB525
used
- Manufacturer: Wele
Basque Country, Spain- Trusted Seller
2014 WELE AA1165
used
- Manufacturer: Wele
- Model: AA1165
- Spindle Taper: BT-40
- Control: Fanuc 0i-MC
Type: VERTICAL CNC MACHINING CENTER | Condition: Used | Status: Very good | Type of control: Fanuc 0i-MC | X axis travel: 1.100 mm | Y axis travel: 650 mm | Z axis travel: 600 mm | Rapid feed: X/Y/Z 24/24/20 m/...
Torbole Casaglia, Italy - Trusted SellerBrescia, Italy
- Trusted Seller
2020 WELE HMC 500
used
- Manufacturer: Wele
SpecificationsPresetting BLUM laser tool, Length, beam, presence, and tool wear check, Transmitter and receiver are separate and mounted on special holders, Fagor optical scales. BLUM laser tool setter, Length, r...
Zanica, Italy - Trusted Seller
2010 WELE AA1365#40
used
- Manufacturer: Wele
SpecificationsWith high pressure 20 bar + 550 lt tank, flat guides, Double inner side auger, chip conveyor. With high pressure 20 bar + 550 lt tank, flat guides, Double internal side auger, chip conveyor.
Zanica, Italy - Trusted Seller
WELE AA965 I Vertical Machining Center
used
- Manufacturer: Wele
- Spindle Taper: BT40
- Control: Fanuc 18i-MB
We hereby offer this used WELE AA965 vertical machining center from 2012, located in Switzerland. This robust machine ensures optimal performance with its equipped Fanuc 18i-MB control unit. Boasting a spacious w...
- Trusted Seller
2011 WELE AA1480#50
used
- Manufacturer: Wele
Specifications: With three internal augers, chip conveyor belt, air/water valve through the spindle. With three internal augers, chip conveyor belt, air/water valve through the spindle. Distance between table sur...
Zanica, Italy Wele Stealth Machining Center
used
- Manufacturer: Wele
- Model: Stealth
- Spindle Taper: 50 available
- Control: Fanuc available
Good condition Wele Stealth Machining Centers manufactured in 2014. Located in USA and other countries. Click request price for more information.
USA