Used Processing in British Columbia, Canada

Hammer Hog System

- 21" x 36" opening - 250 HP, 1200 RPM, 460 volt motor c/w soft start - Screen has approx. 4" x 2" openings - Six (6) rows of hammers c/w spare set - 24" wide x approx. 16' long belt conveyor c/w MDI metal detect...

PEI Four (4) Canister TCO (New)

• Manufacturer: PEI

Fabricated TCO components - Base hopper sections - Mid sections - Retention chamber components - 72" diameter inlet header duct, approximately 60' - 80" diameter outlet header duct, approximately 60' - 74" diamet...

'V' Flight Scan Conveyor

- Manufactured by SawQuip - Approx. 42' c/c head and tail sprockets - H124 chain c/w flights every 24" - Head shaft assembly (no drive) - Tail shaft assembly

Belt Head & Tail Drum

44' Dynamic Action Vibrating Conveyor

• Manufacturer: Dynamic Action

- Balanced - c/w sheave but no motor - 24" wide (narrows down to 18" at the transition end) - Would require a new transition piece

30" x 135' Troughing Conveyor

- Truss frame construction c/w catwalk (Approx. 7' wide x 4'-4" high) - Three (3) sections (32'-6", 55'-6" and 48'-0") - Tail pulley assembly - No head pulley on drive - Belt

16" x 48" Radar High Pressure Blower

• Manufacturer: Radar

- Series 3200 - Displacement 16.7 - c/w silencer on top of blower

STEP FEEDER

- Double acting step feeder - Six (6) steps approximately 10 feet long - No end walls - Electrically driven (drive not included) - Disassembled

36" x 48" Falcon Rotary Hog

• Manufacturer: Falcon RME

- Built in 1992 by Clarkes - Drop feed - 36" x 48" Rotary Hog c/w fixed hammers - Two (2) 8V-8 groove sheaves on rotor - No motors included (originally driven by two (2) 250 HP motors) - Cylinder operated hinged ...

20' x 60' Roof Top Pull Chains (2 only)

• Manufacturer: Canadian Mill Equipment

- Five (5) runs of roof top chain c/w rollers on side - Approximately 50' long - Electric motor/reducer drive unit - Still installed

15' Double Screw Conveyor

- 15' x 36" wide - Dodge gear box - Motor removed

8" x 35' Screw Conveyor

- No drive

12" x 16' Belt Conveyor

- Fabricated steel trough 13" wide x 9" deep - Belt - Head and tail pulley - 5 HP electric drive

30" Troughing Conveyors - Bridge Type

- Approximately 7' wide x 7' high c/w catwalks - One (1) section 96' long - One (1) section 126' long - 30" wide troughing rolls (approx. 3'-9" c/c) - No drives - No head and tail pulleys

36" Conveyor

- Truss type - Covered with catwalk - c/w two (2) sets of drives & belt - 40'-0" sections - 500" feet available