Textile and leather manufacturing » Weaving » Apulia

Building Filters

55

Used Weaving in Apulia, Italy

  • Trusted Seller
    1992 Dornier Rapier Weaving Machinescontact

    1992 Dornier Rapier Weaving Machinescontact me

    • Manufacturer: Dornier

    N.3 DORNIER RIPPER LOOMS, Designed for Technical Fabrics, Model HTV4/SD, Year 1992, AT1 Control Panel, 2.1 meters working with, 4-color weft selection, Staubli electronic dobby, Model 2667 – 16 lever capacity, 16...

    Bisceglie, Italy
  • Trusted Seller
    Weaving on Dornier and Picanol

    Weaving on Dornier and Picanol loomscontact me

    • Manufacturer: Dornier

    1. Dornier LWV 4/E 320 1998 pneumatic. 2. Dornier LWV 4/J 210 1999 pneumatic jacquard. 3. Dornier LWV 4/J 190 1999 pneumatic jacquard. 4. Dornier LWV 4/J 190 1999 pneumatic jacquard. 5. Dornier AWV 4/S 360 2001 p...

    Bisceglie, Italy
  • Trusted Seller
    2006 Vamatex weaving machines with

    2006 Vamatex weaving machines with jacquardcontact me

    • Manufacturer: Vamatex

    N.1 LEONARDO for jacquard (2001), 8 Colors / 4 Prefeeders ROJ CHRONO HS, 2 Warp beams with 1000 mm flanges, 2 Cloth rolls, Jacquard STAUBLI mod 880 with 1344 hooks (2001) with JC5 controller , Harness with 7500 c...

    Bisceglie, Italy
  • Trusted Seller
    Gusken looms for velvetcontact me

    Gusken looms for velvetcontact me

    • Manufacturer: Gusken

    N.3 Gusken looms, Year 1979, Model GFMV 82, Staubli Dobby type 1230/92, Working width 1700 mm, 3 beams per loom, For velvet weaving, with accessories. N.2 Gusken looms, Year 1986, Model GMV 90R, Staubli Dobby typ...

    Bisceglie, Italy
  • Trusted Seller
    1992 Dornier Dobby loomscontact me

    1992 Dornier Dobby loomscontact me

    • Manufacturer: Dornier

    1 Dornier HTV from 1992, working width 190 cm, AT1 control panel, with electronic start-up and take-up, Staubli 2037 dobby with 18 installed levers + 7 colors, equipped with 14 frames, 1 beam, 1 roll of fabric, 4...

    Bisceglie, Italy
  • Trusted Seller
    1995 Looms in 3400mm Vamatexcontact

    1995 Looms in 3400mm Vamatexcontact me

    • Manufacturer: Vamatex

    N.6 VAMATEX P1001 ES looms, Jacquard, STAUBLI, 2,688 needles, 3400 mm, (year 1995). Jacquard CX 860.

    Bisceglie, Italy
  • Trusted Seller
    Dornier looms height 2000mmcontact me

    Dornier looms height 2000mmcontact me

    • Manufacturer: Dornier

    2 looms – Dornier HTV4/SD, year 1990, 4-color, nominal width 200 cm, with Staubli model 2667. 3 looms – Dornier HTV6/SD, year 1991/92, 4-color, nominal width 200 cm, with Staubli model 2667. 1 loom – Dornier HTV8...

    Bisceglie, Italy
  • Trusted Seller
    1999 Somet Thema width 2100mm

    1999 Somet Thema width 2100mm years and 1996 Loomscontact me

    • Manufacturer: Somet

    N.1 Somet Thema Super Excel HP, Year 1999, width 2100mm, Inverter speed control 380 to 480 rpm, 8 end creel, 4 Iro Laser weft accumulator, 8 end weft detector, 8 selector ( 7 fitted), Electronic selvedge, Electri...

    Bisceglie, Italy
  • Trusted Seller
    2000 Vamatex Leonardo looms in

    2000 Vamatex Leonardo looms in 3400mmcontact me

    • Manufacturer: Vamatex

    N.2 Used looms, 2,688 needles, Working width: 3400 mm, | Sector: Weaving | Reference: 4888W

    Bisceglie, Italy
  • Trusted Seller
    2005 Vamatex looms Leonardo Silver

    2005 Vamatex looms Leonardo Silver usedcontact me

    • Manufacturer: Vamatex

    N.12 Leonardo Silver machines available, Silver HI DRIVE model, Year 2005, Height 2100 mm, Staubli 2861 dobbies, 20 blades, 8 colors, 3-4 ROJ crono X2-0 feeders, Single beam with diameter up to 1000 mm.

    Bisceglie, Italy
  • Trusted Seller
    Looms Dorniercontact me

    Looms Dorniercontact me

    • Manufacturer: Dornier

    N.2 Dornier ptv 4/s, Working width 2700 mm, Staubli 2668 dobby, 12 healds installed, Year 2002, 8(1)-6(1) ECS color selector, AT2 dialogue panel, 1 beam, 1 fabric roller, 10 frames, 4 Roj pre-feeders, 3000 healds...

    Bisceglie, Italy
  • Trusted Seller
    2021 Looms Toyota Model JAT810contact

    2021 Looms Toyota Model JAT810contact me

    • Manufacturer: Toyota

    No. 10 TOYOTA JAT 810, Year 2021, Working width 2300 mm, Leno recovery, 16 pieces - 10 levers, 12 pieces - 8 levers, 4 pieces - 12 levers, All 4 colors, double weft introduction. All with Lycra attachment, Double...

    Bisceglie, Italy
  • Trusted Seller
    2018 Picanol Optimax

    2018 Picanol Optimax

    • Manufacturer: Picanol
    • Model: OPTIMAX

    N.24 Looms brand Picanol, Model OptiMax-i-6-R, Year 2018, GC clamp system, STAUBLI S3020, dobby, Levers 16 max, SUMO engine, 6 electronic colors, 2 IRO Luna x3 weft accumulators, 16 Alupower 124 gtp frames, Singl...

    Bisceglie, Italy
  • Trusted Seller
    1998 SULZER

    1998 SULZER

    • Manufacturer: Sulzer

    3 SULZER rapier looms for terry cloth, type G6200 B260 F8 J28, width 260 cm, year 1998, STÄUBLI CX870 jacquard, 2,688 hooks installed, JC5. 1 SULZER rapier loom for terry cloth, type G6200 B260 F8 J, width 260 cm...

    Bisceglie, Italy
  • Trusted Seller
    2001 Vamatex Leonardo loomscontact me

    2001 Vamatex Leonardo loomscontact me

    • Manufacturer: Vamatex

    N.6 used looms, Working width: 2.60 m, | Sector: Weaving | Reference: W274RQ

    Bisceglie, Italy
1234

Overview

Weaving equipment encompasses a variety of machinery used in the textile industry to interlace threads or yarns to create fabrics. This category includes looms, warping machines, and other related devices. These machines are essential for producing a wide range of textiles, from simple cloth to complex woven patterns, and are used in both industrial and small-scale textile production.

FAQ

What should I consider when buying a used weaving machine?

Consider the machine's age, operational condition, and capacity. Check for any signs of wear and tear, and review maintenance records if available.

How do I ensure the weaving machine is shipped safely to my location?

Use a specialized machinery transport service. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for a weaving machine?

Regular maintenance should include lubrication of moving parts, checking for thread tension and alignment, and cleaning to remove lint and debris. Follow the manufacturer's guidelines for detailed maintenance intervals.