WAGO 2-channel analog output 750-550
- Manufacturer: Wago
2-channel analog output; DC 0 ... 10 V The analogue output module generates signals of the standardized value 0 ... 10 V. The output signal is electrically isolated from the system level with a resolution of 12 b...
Freiberg, Germany
WAGO 750-602
- Manufacturer: Wago
750-602 used Feeding of potential; DC 24 V The feed-through terminal is used to supply the bus terminals with the respective supply potential. The maximum current that may flow through the feed-through terminal i...
Freiberg, Germany
Wago end module 750-600
- Manufacturer: Wago
End module An end module must be set at the end of each fieldbus node. The end terminal closes the internal terminal bus and guarantees proper data transmission.
Freiberg, Germany
WAGO 750-304 (g)
- Manufacturer: Wago
used WAGO I/O System 750/753Art. no. 750-304 INTERBUS fieldbus coupler This fieldbus coupler connects the WAGO-I/O-SYSTEM as a slave with the INTERBUS as a remote bus participant. The bus coupler recognizes all p...
Freiberg, Germany
WAGO 2-channel digital output 750-501
- Manufacturer: Wago
unused stock 2DO 24V DC0,5A 2-channel digital output Number of digital outputs 2 Total number of channels (module) 2 Signal type Digital Signal type DC 24 V voltage Actuator connection 2 x (2 conductors, 3 conduc...
Freiberg, Germany
WAGO 4-channel digital input 750-402
- Manufacturer: Wago
unused stock item 4-channel digital input; DC 24 V; 3 ms The digital input module records control signals from the field, e.g. via sensors. A filter is connected upstream of each input to suppress interference. T...
Freiberg, Germany
WAGO 4-channel digital output; DC 24 V; 0.5 A; 2-wire connection 750-531
- Manufacturer: Wago
unused stock item 4-channel digital output; DC 24 V; 0.5 A; 2-wire connection
Freiberg, Germany
WAGO 2-channel analog input 750-467
- Manufacturer: Wago
WAGO used 750-467 2-channel analog input; DC 0 ... 10 V; single-ended The analogue input module processes signals of the standardized value 0 ... 10 V. The input signal is transmitted electrically isolated to the...
Freiberg, Germany
WAGO 4-channel analog output 750-555
- Manufacturer: Wago
I/O System 750/753 4-channel analog output; 4 … 20 mA Number of analog outputs 4 Number of channels in total (module) 4 Signal type current Signal type current DC 4 … 20 mA Actuator connection 4 x (2 conductors) ...
Freiberg, Germany
Wago 8-channel digital input 753-430
- Manufacturer: Wago
used 8-channel digital input; DC 24 V; 3 ms The digital input module has 8 channels with only 12 mm housing width. It captures control signals from the field, e.g., via sensors. A filter is connected in front of ...
Freiberg, Germany
WAGO 4-channel digital input 750-402 (g)
- Manufacturer: Wago
WAGO used 4-channel digital input; DC 24 V; 3 ms The digital input module records control signals from the field level, e.g. via sensors. To suppress interference, each input has a filter in front of it. Field an...
Freiberg, Germany
Wago transfer module 289-725
- Manufacturer: Wago
used Transfer module; Sub-Min-D; terminal strip; 9-pole; dual-deck printed circuit board terminals; in mounting base; with soldering point; 2.50 mm²
Freiberg, Germany
WAGO 4-channel digital input 750-403
- Manufacturer: Wago
WAGO 750-403 used 4-channel digital input; DC 24 V; 0.2 ms The digital input module records control signals from the field, e.g. via sensors. A filter is connected upstream of each input to suppress interference....
Freiberg, Germany
Wago 750-614
- Manufacturer: Wago
Potential multiplication The potential multiplier terminal is used for multiple tapping of the supply voltage. This bus terminal makes the use of additional terminal blocks superfluous.
Freiberg, Germany
WAGO 750-431 (g)
- Manufacturer: Wago
used WAGO I/O System 750/753Art. no. 750-431 8-channel digital input; DC 24 V; 0.2 ms The digital input module has 8 channels with a width of only 12 mm. It records control signals from the field, e.g. via sensor...
Freiberg, Germany
Tip: Enter manufacturer, model or keyword