- Trusted Seller
100 TON WABASH 4 POST HYDRAULIC PRESS. #0777525
- Manufacturer: Wabash
Toledo, OH - Trusted Seller
30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12"
- Manufacturer: Wabash
- Model: 30-1212-4STMBX
30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12" Used 30 ton Wabash press, model 30-1212-4STMBX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 3" daylight spacing, 14.5" wide tie...
Cleveland, OH - Trusted Seller
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"
- Manufacturer: Wabash
- Model: G302-CX
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...
Cleveland, OH 
Wabash 30T Transfer Press
- Manufacturer: Wabash
Item 3039 – One (1) Used Wabash Lab Press, 15” x 15” platens, 30 Ton closing force, 12T-transfer press, electric platens, individual controls, adjustable daylight, self contained hydraulic unit, 4-post
Cleveland, OH
Wabash 30T Lab Press
- Manufacturer: Wabash
Item 3038-1 – One (1) Used Wabash Lab Press, 15” x 12” mounting plates, 30 Ton, individual controls, adjustable daylight 12-22”, self contained hydraulic unit, 4-post type. Video Link:
Cleveland, OH
Wabash 75T Transfer Press
- Manufacturer: Wabash
Item 3040 – One (1) Used Wabash Transfer Press, 15” x 15” platens, 75 Ton closing force, 25T-transfer press, electric platens, individual controls, adjustable daylight, self contained hydraulic unit, 4-post
Cleveland, OH
Erie, PA
15" x 15" Wabash Press
- Manufacturer: Wabash
-15 Ton -(1) Available -Self contained hydraulic unit -Electric heated platens - Two daylight -460v
Erie, PA- Trusted Seller
75 Ton Wabash Hydraulic Molding & Laminating Press
- Manufacturer: Wabash
- Capacity: 75,000 kg
- Stroke length: 304.8 mm
75 Ton Wabash, 4 Post, upstroke, 54” x 54” hot plates, 12” str., 20”-33” DL, #89552 USED 75 TON WABASH HYDRAULIC MOLDING & LAMINATING PRESS 4 post upstroke type; floor standing Daylight opening between (electrica...
Elk Grove Village, IL - Trusted Seller
2000 75 Ton Wabash G75H-18-18-BX Heated Platen Preess
- Manufacturer: Wabash
- Capacity: 75,000 kg
75 Ton Wabash, Model G47H-18-18-BX, 18" x 18" Platens COMPRE. CYL. 8x8 Platens @ 8000 Watts Each Specifications are accurate to the best of our knowledge, subject to verification.
Elk Grove Village, IL - Trusted Seller
WABASH 25-2222-TRM HEATED PLATEN PRESS
- Manufacturer: Wabash
Serial #: 6032-4 | Compression bore and stroke: 5 x 7 | Transfer cylinder bore and stroke: 3.25 x 15 | Force (tons): 25 | Trans: 2 | Motor hp: 3 | Motor amps: 4.8 | Electrics: 220/3/60
Elk Grove Village, IL 
50 TON WABASH 18″ X 18″ FOUR-OPENING HYDRAULIC PRESS
- Manufacturer: Wabash
MODEL # PC-50-18-8TM. SERIAL #6406. CLAMP CYLINDER IS 7” BORE WITH A MAX STROKE OF 12”. SET UP WITH FOUR DAYLIGHT OPENINGS OF 3” EACH. TOTAL OF 8 ELECTRICALLY HEATED AND WATER COOLED PLATENS. FULLY GUIDED ON 2” D...
Grand Rapids, MI
12T 12″X12″ 6″ MAX STROKE, 4-POST, WABASH
- Manufacturer: Wabash
MODEL 12-1212-2TM. SERIAL #9019. SET UP WITH 12” X 12” X 3” ELECTRICALLY HEATED PLATENS. NOMINAL BED SIZE IF PLATENS ARE REMOVED IS APPROX 15” X 15”. DAYLIGHT IS ADJUSTABLE FROM APPROX 6” TO 12”. CLAMP CYLINDER: ...
Grand Rapids, MI
12T 12″X12″ 6″ MAX STROKE, 4-POST, WABASH
- Manufacturer: Wabash
MODEL 12-1212-2TM. SERIAL #9021. SET UP WITH 12” X 12” X 3” ELECTRICALLY HEATED PLATENS. NOMINAL BED SIZE IF PLATENS ARE REMOVED IS APPROX 15” X 15”. DAYLIGHT IS ADJUSTABLE FROM APPROX 6” TO 12”. CLAMP CYLINDER: ...
Grand Rapids, MI
50T 25″X24, 30″ DAYLIGHT, 18″ STROKE, WABASH, C-FRAME
- Manufacturer: Wabash
MODEL C50-2424-2TMACX. SERIAL #7994-12. 4” CLEARANCE BEHIND BED AND SLIDE. 12” BORE CLAMP CYLINDER WITH 8” ROD AND 18” STROKE. APPROX 30” MAX DAYLIGHT. APPROX 37” OPERATOR HEIGHT. GUIDED WITH CLAMP CYLINDER AND A...
Grand Rapids, MI
Tip: Enter manufacturer, model or keyword