- Trusted SellerAuction
1988 Voestalpine DA 210
- Manufacturer: Voestalpine
- Model: DA 210
Voestalpine DA 210 Lathe; spindle speed 33-1500min-1; tailstock; 3x400VO/50Hz; 5,5kW; bed length 1590mm
Berndorf, AustriaVisit Auction Website - Trusted SellerAuction
1987 Voestalpine DA 260/71
- Manufacturer: Voestalpine
- Model: DA 26071
Voestalpine DA 260/71 Lathe; spindle speed 21-1500min-1; tailstock; 3x400V/50Hz; 7,5kW; bed length 2000mm; center height over bed 260mm; turning diam over bed 535mm; spindle bore 71mm
Berndorf, AustriaVisit Auction Website 1977 Weipert Voest Alpine E 900 × 5,000 center and feed screw lathe
- Manufacturer: Voestalpine
Machine was overhauled in 2001 Name of the control: conventional | Control type: conventional | Delivery time: immediately
Cologne, Germany- Trusted SellerAuction
VÖST-ALPINE - DA 160 - Lead and Pull Spindle Lathe
- Manufacturer: Voestalpine
Gearbox was removed because a gear wheel was replaced Gearbox must be installed by the buyer
Huisheim, GermanyVisit Auction Website - Trusted Seller
Lathe Voest DA-160
- Manufacturer: Voestalpine
- Spindle bore: 36 mm
turning diameter over bed/sledge 330mm/190mm center to center 650mm 3-jaw chuck, tool holder device tail stock
Heilbronn, Germany Voest Alpine / Weiler DA210 lathe turning machine with Sauter copying device .de
- Manufacturer: Voestalpine
- Model: DA 210
Voest Alpine / Weiler Lathe / turning machine DA 210 with Sauter copying turning device hydraulic Condition and item as seen in the pictures. Sale as viewed under exclusion of any warranty. We kindly request on-s...
Plettenberg, Germany- Trusted Seller
Voest-Alpine DA160
- Manufacturer: Voestalpine
- Model: DA160
Distance between the centers: 650 mm | Center height: 160 mm | Turning diameter above the bed: 320 mm ø | Turning diameter above the support: 180 mm ø | Through: 32 mm ø | 3-klauwplaat: 160 mm ø | Self-centering...
Etten-Leur, Netherlands - Trusted Seller
1971 VÖEST DA 300/2000
- Manufacturer: Voestalpine
- Spindle bore: 83 mm
Additional equipment: Complete electrical equipment, three-jaw chuck 400 mm Ø, ditto RÖHM 310 mm Ø; four-jaw chuck 300 mm Ø, faceplate, IDEAL quick-change tool post with 6 inserts, live center, MT 5 reducing slee...
Wiesbaden, Germany - Trusted SellerAuction
Voitsberg, AustriaVisit Auction Website 
Voest Parallel Lathe 1000 x 220
- Manufacturer: Voestalpine
VOEST 220 PARALLEL LATHE 1000 X 220 Complete with: - no. 1 self-centering chuck Ø 310 mm. - safety guards Model 220 Height of centers 220 mm. Distance between tips 1,000 mm. Ø on carriage 240 mm. Ø on the bench 4...
Solbiate Olona, Italy
1987 VOEST-ALPINE-WEIPERT WNE 570/2 #1077-02583
- Manufacturer: Voestalpine
- Model: WNE 5702
- Spindle bore: 63 mm
- Power requirement: 22 kW
The technical data are manufacturer or operator specifications and are therefore non-binding for us. We reserve the right to make a mid-sale; exclusively our terms and conditions of business and sale apply. Abou...
Dorsten, Germany- Trusted Seller
VOEST ALPINE WEIPERT WNC 1103
- Manufacturer: Voestalpine
- Spindle bore: 165 mm
Swinging on the bed: 1100 mm | Swing over bed: 1100 mm | Swinging over the saddle: 730 mm | Spindle nose taper: ASA 15 | Spindle hole: 165 mm | Bed height: 440 mm | Swing over saddle: 730 mm | Central height: 55...
Tortona, Italy 
VOEST- ALPINE DA160 #1077-03995
- Manufacturer: Voestalpine
- Model: DA160
Accessories and cabinets can be optionally purchased The technical data are manufacturer or operator information and therefore non-binding for us. We reserve the right to a mid-market sale; exclusively our terms...
Dorsten, Germany- Trusted Seller
1980 VOEST DA 180
- Manufacturer: Voestalpine
- Model: DA 180
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Turning diameter over bed: 230mm | Turning diameter over slide: 120mm | Center distance: 800mm | Spindle spe...
Günzburg, Germany - Trusted Seller
Voest Engine Lathe 20x78" 20" Swing 12" Self Centering 3 Chuck Steady Rest
- Manufacturer: Voestalpine
Used, in Good Working Condition, Tested OK. 12" Self centering Chuck 3 Jaw 20" Swing 21-1500 rpm Spindle hole 1-3/4 230/460V 3Hp motor 13" Bed 12" gap section can be removed for more swing If this item ships as F...
$3,400 USDMillersburg, IN 
Voestalpine DA 210 Lathe
- Manufacturer: Voestalpine
- Model: DA 210
Good condition Voestalpine DA 210 Lathes manufactured in 1973. Located in Germany and other countries. Click request price for more information.
Germany
Tip: Enter manufacturer, model or keyword
