- Trusted Seller
Pillar jib crane foundation plate from Vetter - Ø 1450 mm 35123
- Manufacturer: Vetter
Intermediate plate for column-mounted slewing crane, crane base plate, indoor crane, workplace crane, crane base plate -Pillar-mounted slewing crane: intermediate plate/base plate, outside: Ø 1050 mm
Wiefelstede, Germany - Trusted Seller
Pillar jib crane Foundation plate from Vetter - Ø 1450 mm 35122
- Manufacturer: Vetter
Intermediate plate for column-mounted slewing crane, crane base plate, indoor crane, workplace crane, crane base plate -Pillar-mounted slewing crane: intermediate plate/base plate, outside: Ø 1050 mm
Wiefelstede, Germany - Trusted SellerAuction
Pillar jib crane Vetter AS
- Manufacturer: Vetter
Load capacity 250 kg, outreach approx. 4,500 mm, without vacuum lifter
Trossingen, GermanyVisit Auction Website - Trusted SellerAuction
Overhead crane (Knockdown subject to approval) Vetter
- Manufacturer: Vetter
Load capacity 2,000 kg, span approx. 11,000 mm, without crane runway, chain hoist, Fetter, type H02
Trossingen, GermanyVisit Auction Website - Trusted SellerAuction
Pillar jib crane Vetter M10-4,5
- Manufacturer: Vetter
SN: 901109/1, load capacity 1,000 kg, outreach 4,250 mm, electric chain hoist, load hook, floor operation
Uhingen, GermanyVisit Auction Website - Trusted SellerAuction
Pillar jib crane Vetter M10-4,5
- Manufacturer: Vetter
SN: 901109/1, load capacity 1,000 kg, outreach 4,250 mm, electric chain hoist, load hook, floor operation
Uhingen, GermanyVisit Auction Website - Trusted Seller
Vetter column-mounted slewing jib crane 500 kg
- Manufacturer: Vetter
Pillar jib crane, with chain hoist Vetter Load capacity: 500 kg Chain hoist: DEMAG DC-COM 5-500 1/1 H4 V4,5/1,1 used, tested !
$2,531 USDZschepplin, Germany - Trusted SellerAuction
Wall-mounted slewing jib crane (K306.W4) Vetter
- Manufacturer: Vetter
Load capacity 500 kg, electric chain hoist, load hook, floor operation, outreach approx. 6,000 mm
Uhingen, GermanyVisit Auction Website - Trusted Seller
Vetter wall-mounted slewing jib crane with chain hoist
- Manufacturer: Vetter
Wall-mounted slewing jib crane, with chain hoist Vetter Chain hoist: Stahl Carl Nord, Leipzig 1 fall 350 kg Motor: 400 V 3AC 3,2 / 1,25 A 0.41 / 0.1 kW with articulated boom ! blue tool is not part of the offer !...
Zschepplin, Germany - Trusted Seller
2 pieces Vetter Industry fork tines cross-section 130x60 total length 2400
- Manufacturer: Vetter
Hof_FP Age rating: No age restrictions | Content: 1 piece | Mass: 180000 g | Item condition: Unused stock, minimal storage wear. | Wt.: approx. 180 kg
$1,168 USDBorken, Germany - Trusted Seller
2024 Vetter Kalmar 15.9T - NEW Forks
- Manufacturer: Vetter
Forks for squid: 200 x 75 x 2 500 mm Load capacity/tractive force: 15920 kg | Tare weight: 924 kg | Fork length: 2500 mm | Fork-wide: 200 mm | Fork thick: 75 mm | Fork carriage width: mm
2002 Vetter Kettenzug Typ SIC 3F/4F (M100000510)
- Manufacturer: Vetter
Vetter chain hoist type SIC 3F/4F 400 Volt 2 lifting speeds Chain length 3.50 meters Load capacity 250 kg This article refers to: Vetter chain hoist type SIC 3F/4F
Weiterstadt, Germany
2024 VETTER Gabelzinken mit Edelstahlbeschichtung für alle EX-
- Manufacturer: Vetter
- Lifting capacity: 2,000 kg
- Machine weight: 130 kg
Load capacity 2000 kg at 500 mm load center, fork cross-section 110 x 45 mm, fork length: 1200 mm, suspension: FEM2A, NEW Vetter forks with a stainless steel coating around the fork blade approved for all EX area...
$2,755 USDFriedberg, Germany
2019 VETTER MTGZ16/8/12/A
- Manufacturer: Vetter
- Lifting capacity: 1,600 kg
- Machine weight: 90 kg
Load capacity 1600 kg at 500 mm load center, fork cross section 100 x 35 mm, fork length: 800 mm, overall width: 115 mm, opening range: 800-1200 mm, suspension: FEM2A, inherent center of gravity: 263 mm, new VETT...
$2,178 USDFriedberg, Germany
2006 Vetter GABELZINKEN
- Manufacturer: Vetter
Subject to technical changes. Picture may differ. Current operating hours on request.
Henstedt-Ulzburg, Germany
Tip: Enter manufacturer, model or keyword
