Used Radial Drills

4'12" FOSDICK "SENSITIVE" RADIAL DRILL w/ROTATING TABLE

• Manufacturer: Fosdick
• Model: SENSITIVE
• Column size: 304.8 mm
• Arm extended: 1,219.2 mm

4'12" FOSDICK "SENSITIVE" RADIAL DRILL Imperial Metric Serial No. 20240, Model "SENSITIVE" EQUIPPED WITH: Rectangular Table (Rotating) CATALOG SPECIFICATIONS: Arm Length . . . . . . . . .4' Column Diameter . . . ...

Carlton 4' X 9" Radial Arm Drill

• Manufacturer: Carlton

Made In Usa, 16" X 22" T-slot Table Name: Radial Arm Drill | Arrival date: 10-14-2025 | Dimensions l x w x h (inches): 100 x 59 x 98 | Capacity: 4' X 9" | Weight (lb.): 6215 | Available quantity: 1

6'15" GIDDINGS & LEWIS/BICKFORD "CHIPMASTER 962" RADIAL DRILL w/TAPPING - #5 MT

• Manufacturer: Bickford
• Model: CHIPMASTER
• Column size: 381 mm
• Arm extended: 1,828.8 mm

6'15" GIDDINGS & LEWIS/BICKFORD "CHIPMASTER" Imperial Metric RADIAL DRILL Serial No 962-00034-69, Model Chipmaster, Type 962 EQUIPPED WITH: Tapping Capabilities Plain Base - Power Arm Elevation Power Clamping to ...

5'13" CARLTON "3A" RADIAL DRILL w/T-SLOTTED BOX TABLE - POWER CLAMPING

• Manufacturer: Carlton
• Model: 3A
• Column size: 330.2 mm
• Arm extended: 1,524 mm

5'13" CARLTON RADIAL DRILL Imperial Metric Serial No 3A3878, Model 3A, EQUIPPED WITH: 62" x 36" x 20" Plain T-Slotted Box Table Tapping Capabilities Plain-Type Base Power Arm Elevation Power Clamping to Arm, Colu...

Carlton 6' X 17" Radial Arm Drill

• Manufacturer: Carlton

Made In Usa, 26" X 33" Table, 15 Hp, 1750 Rpm Name: Radial Arm Drill | Arrival date: 10-22-2025 | Dimensions l x w x h (inches): 169 x 97 x 139 | Capacity: 6' x 17" | Electrical: 3/60/230/460 | Weight (lb.): 2338...

1955 7'17" AMERICAN "HOLEWIZARD" EXTRA-HIGH RADIAL DRILL w/12” RISER & FLOOR PLATE

• Column size: 431.8 mm
• Arm extended: 2,133.6 mm

7'17" AMERICAN "HOLEWIZARD" RADIAL DRILL NEW 1955, SERIAL NO 74492, SERIES "HOLEWIZARD" Imperial Metric EQUIPPED WITH: TAPPING CAPABILITIES POWER ARM ELEVATION POWER CLAMPING TO COLUMN & HEAD POWER RAPID TRAVERSE...

3'9" IKEDA "RMS-9" RADIAL DRILL w/TAPPING - POWER ARM ELEVATION - #4 MT

• Manufacturer: Ikeda
• Model: RMS-9
• Column size: 228.6 mm
• Arm extended: 914.4 mm

3'9" IKEDA RADIAL DRILL Imperial Metric Serial No 90025, Model RMS-9, EQUIPPED WITH: Tapping Capabilities Plain Type Base Power Arm Elevation Coolant System (Built-In Base) CATALOG SPECIFICATIONS: Arm Length 3' C...

American 11" X 4' Radial Arm Drill - Hole Wizard

• Manufacturer: American
• Model: HOLE WIZARD

W/t-slot Table (28" X 36), Made In Usa, (8320#) 110x44x109, (1250#) 38x30x18, *contains 2 Pieces

5'15" AMERICAN ”32-SPEED” RADIAL DRILL w/36” DIAMETER WORK TABLE - TAPPING - #5 MT

• Column size: 381 mm
• Arm extended: 1,524 mm

5'15" AMERICAN RADIAL DRILL Imperial Metric Serial No. 77-570, EQUIPPED WITH: 36" Diameter Work Table Tapping Capabilities - Plain Base (32) Spindle Speeds Power Column Clamping Power Rapid Traverse To Head Coola...

2'6" JOHANSSON “STANDARD-DUTY” SLIDING RAM-TYPE RADIAL DRILL w/POWER DOWN FEED - VISE

• Column size: 152.4 mm
• Arm extended: 762 mm

2'6" JOHANSSON SLIDING RAM-TYPE RADIAL DRILL Imperial Metric Serial No 21665, Series Standard Duty EQUIPPED WITH: Manual Table Adjustment Power Arm Elevation Power Down Feed Heavy-Duty Vise CATALOG SPECIFICATIONS...

1970 24" AMERICAN REMOVABLE RISER BLOCK FOR A RADIAL DRILL - WAS PREVIOUSLY BEING USED ON 5'11" AMERICAN RADIAL DRILL

24" AMERICAN REMOVABLE RISER BLOCK THIS RISER BLOCK WAS USED ON A 5'11" AMERICAN RADIAL DRILL, S/N 78749, NEW IN 1970, & IS PROBABLY INTER- CHANGEABLE WITH ANY RADIAL DRILL.

4'11" GIDDINGS & LEWIS-BICKFORD “952 CHIPMASTER” RADIAL DRILL w/L-BASE - UNIVERSAL BOX TABLE - #5 MT

• Manufacturer: Bickford
• Model: 952
• Column size: 279.4 mm
• Arm extended: 1,219.2 mm

4'11" GIDDINGS & LEWIS-BICKFORD “CHIPMASTER” RADIAL DRILL SERIAL NO 952-00150-69, MODEL 952 Imperial Metric EQUIPPED WITH: TAPPING CAPABILITIES UNIVERSAL T-SLOTTED BOX TABLE L-TYPE BASE - POWER ARM ELEVATION POWE...

5'15" NARDINI "FRN-60" RADIAL DRILL w/TAPPING & THREADING - PLAIN BASE - 10 HP SPINDLE - COOLANT IN BASE

• Manufacturer: Nardini
• Model: FRN-60
• Column size: 381 mm
• Arm extended: 1,524 mm

5'15" NARDINI RADIAL DRILL Imperial Metric Model FRN-60 EQUIPPED WITH: Tapping/Threading Capabilities Plain-Type Base Power Arm Elevation Power Clamping Hardened Column Coolant System (Built-In) CATALOG SPECIFICA...

5'14" SOUTH BEND "GK50/1500" RADIAL DRILL w/TAPPING - PLAIN BOX TABLE - HYDRAULIC CLAMPING

• Manufacturer: South Bend
• Column size: 355.6 mm
• Arm extended: 1,499.62 mm

5'14" SOUTH-BEND "GK50/1500" RADIAL DRILL Imperial Metric Serial No 7321, Model GK50/1500, Series "G" EQUIPPED WITH: Tapping Capabilities Plain Type Base - Power Arm Elevation Hydraulic Clamping 15.5" x 25.5" x 1...

SAMSTAR 39" X 9" RADIAL DRILL

• Manufacturer: SAMSTAR
• Column size: 228.6 mm
• Arm extended: 990.6 mm

See attached pdf for detailed BROCHURE and SPECIFICATIONS STANDARD FEATURES: Box Table, Coolant System, Work Light, Manual Clamping on Head and Arm Swivel and Manuals. SPECIFICATIONS: