Processing » Heat Exchangers » Plate Heat Exchangers » California

Building Filters

104

Used Plate Heat Exchangers in California, USA

  • Trusted Seller
    Heat Exchanger, Plate, 312 SF,

    Heat Exchanger, Plate, 312 SF, S/st, APV, (52) Plates, #C431660

    • Manufacturer: APV - Gaulin

    APV Plate Heat Exchanger, Model SR35-T - Includes 52 plates measuring 15" x 44", providing 312 sq. ft. heat transfer area. Serial number 15857. Stainless steel plate material.

    Brisbane, CA
  • Trusted Seller
    Heat Exchanger, Plate, 224 SF,

    Heat Exchanger, Plate, 224 SF, S/st, American, 63 Plates, #S431825

    • Manufacturer: American Reclaiming

    American Reclaiming Plate Heat Exchanger - Features (63) 14" wide x 48" high stainless steel plates with 224.3 square feet of heat transfer area. Designed for 125 PSI at 150°F. Serial Number 12426.

    Brisbane, CA
  • Trusted Seller
    Heat Exchanger, Plate, 95 SF,

    Heat Exchanger, Plate, 95 SF, S/st, Mueller, 28 Plates, #S741021

    • Manufacturer: Mueller

    Plate type heat exchanger, manufactured by Mueller, model number ATI59FFF-10. Unit includes twenty-eight (28) plates measuring 41" long X 12" wide for a total surface area of approximately 95 square feet. Rated f...

    Brisbane, CA
  • Trusted Seller
    Goodnature model PNP-144 'Plug and

    Goodnature model PNP-144 'Plug and Play' Pasteurizer

    • Manufacturer: GOODNATURE

    Goodnature model PNP-144 'Plug and Play' Pasteurizer, upgraded to a model PNP-264, skid mounted, set up for flash Pasteurization using the HTST (high temperature-short time) method, with (2) plate heaters, regene...

    Lodi, CA
  • Trusted Seller
    Mueller model LI1N-4/3-L111 ammonia plate

    Mueller model LI1N-4/3-L111 ammonia plate chiller

    • Manufacturer: Mueller

    Mueller model LI1N-4/3-L111 ammonia plate chiller, (8) plate stations, (7) 45" x 96" dimpled refrigerant plates, two zone with catch pan and enclosure, with controls, control valves, liquid and hot gas manifolds,...

    Lodi, CA
  • Trusted Seller
    Cooler, Tumble Chiller, 300 Gallon,

    Cooler, Tumble Chiller, 300 Gallon, S/st, Cleveland #S743105

    • Manufacturer: Cleveland

    Cleveland Model P-TC 320- Cook Chill Vertical Tumble Chiller; All stainless steel construction; capacity for up to 320 gallons of product load; fully-insulated 65" diameter X 43" long perforated drum; built-in pl...

    San Dimas, CA
  • Trusted Seller
    Votator, 6" X 72", Single,

    Votator, 6" X 72", Single, Girdler, S/st, 7.5 HP, #C718690

    • Manufacturer: Votator

    Girdler Votator, Model FV1S100, scraped surface heat exchanger. 6" x 72" chrome-plated stainless barrel. Equipped with 7.5 HP gearhead motor and 2" feed pump and drive. Mounted on stand. Serial number 61101.

    Brisbane, CA
  • Trusted Seller
    no-image_en.png

    APV model R55 plate and frame heat exchanger

    • Manufacturer: APV - Gaulin

    APV model R55 plate and frame heat exchanger, serial number 18611, three zones with regeneration blocks and a total of 78 each type 316SS plates, 2" threaded ports, with hot hold loop and hot water set, originall...

    Lodi, CA
  • American Heat Plate Exchanger

    American Heat Plate Exchanger

    • Manufacturer: American Heat Plate Exchanger

    Stainless Steel Plate Exchanger, Mfg. by American Heat, with 409 Sq Ft heat surface, serial no. 6716, Mfg.1968, 150 PSI rated, with 4"flange inlet, 2" outlet, with S/S plates was heating sweetener. (Plate pack ...

    Stockton, CA
  • Thermaline Plate Heat Exchanger

    Thermaline Plate Heat Exchanger

    • Manufacturer: Thermaline Plate Heat Exchanger

    Thermaline Plate Heat Exchanger Model T28-CH, 5497, T316 s/s, 200 test PSIG Approximately 12" x 40" packed plates, FPDM gaskets. 150 PSIG, 300 degrees Fahrenheit maximum.

    Stockton, CA
  • APV Plate Heat Exchanger,

    APV Plate Heat Exchanger,

    • Manufacturer: APV - Gaulin
    • Model: R-56

    APV Plate Heat Exchanger, Model R-56, Serial No 1108-6856, with (30) 15'' wide x 60'' long stainless steel plates, mild steel frame, 4'' x 3'' in/out. Plate Pack only.

    Stockton, CA
  • APV Stainless Steel Plate Heat

    APV Stainless Steel Plate Heat Exchanger

    • Manufacturer: APV Stainless Steel Plate Heat Exchanger

    APV Stainless Steel Plate Heat Exchanger Model R55, Serial No 2203,with (63) Plates. Made in England.

    Stockton, CA
  • APV Plate Heat Exchange

    APV Plate Heat Exchange

    • Manufacturer: APV - Gaulin

    APV Plate Heat Exchanger, Model SR2 M6S-12, Serial No 20053003000021, Mfg. 2005, with (31) stainless steel plates 8'' wide x 32'' long, with 2 1/2'' Tri Clamp product inlet/outlet.

    Stockton, CA
  • 1991 Sentry Plate Heat Exchanger

    1991 Sentry Plate Heat Exchanger #3554

    • Manufacturer: Sentry Plate Heat Exchanger #3554

    Sentry Plate Heat Exchanger, Model SPG-55-98, Mfg. 1991, Serial No.130173,Stainless steel contact with 2"Tri-Clamp in/ out, with (98) Stainless Steel plates, 10"wide x 38" long, with a mild steel base.

    Stockton, CA
  • Tranter Superchanger Plate & Frame

    Tranter Superchanger Plate & Frame Heat Exchanger

    • Manufacturer: Tranter Superchanger Plate & Frame Heat Exchanger

    Tranter Superchanger Plate &Frame Heat Exchanger Model GXD-091-L-5UP, Serial No SU912, MFG. 2010, 2899,77 Square foot surface area, Max WP 150 PSI@250*F, MDMT -20*F @150PSI, Net Weight 5,035 LBS

    Stockton, CA
34567

Overview

Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

FAQ

What factors should I consider when purchasing a heat exchanger?

Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

How can I ensure my heat exchanger is shipped safely?

Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

What maintenance is required for a heat exchanger?

Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.