Used Heat Exchangers in New Jersey, USA

Stainless Steel APV Plate and Frame Heat Exchanger - IPP# 204579

• Manufacturer: APV

maximum temperature is 410 degrees F

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 232712

• Manufacturer: APV/Hebeler

Minimal design metal temp.=-20 degrees F at 200 psi.

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 216388

Certification: Certified by WFT GmbH MDMT 319 degrees F at 450 psi Volume: 89.70/90.3 WD (Water Distribution): 10-300

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 214850

• Manufacturer: Alfa Laval

CRN L-4646.57 Print weight is 6247 lbs The frame plates are SA-516-70 CS With (418) channel plates

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222357

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

Hastelloy C22 Calorifier Shell and Tube Heat Exchanger - IPP# 247267

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 229451

Duty: 1.41 MW

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 246071

• Manufacturer: Ward Tank Co

Note: the NB Papers report this unit to be vertical, however it is set to be in the horizontal position. (AS)

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 246073

• Manufacturer: Atlas Industrial

Tema Type BEM size 48-240 Vacuum Condenser

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 241133

• Manufacturer: Enerquip LLC

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 245568

• Manufacturer: RAS Process Equipment

Graphite Kearney 981 Shell and Tube Heat Exchanger - IPP# 83655

• Manufacturer: Kearney

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 241051

• Manufacturer: Atlas Industrial

Carbon Steel Rubicon Shell and Tube Heat Exchanger - IPP# 112191

• Manufacturer: Rubicon

Shell rated 75 psi @ 400 deg. F, tubes rated 150 psi @ -65 deg. F Tube length: 18' around the bend

Copper Frick CO. Shell and Tube Heat Exchanger - IPP# 205012

• Manufacturer: Frick

270/FV to 300/FV PSI @ -30/200 deg. F Tube, Coil, & inner chamber. Tube side -30 deg. F @ 200 deg. F Manufactured by Frick CO.Wanbouugh PA