Used Processing in Bavaria, Germany

crate washer

Additional title: high pressure spraying | Capacity: 1800 cr/h | Formats: 20 bottle crates (NRW 0,5 l, Euro 0,5 l, Steinie 0,33 l) | Operation / control: semiautomatic with switch cabinet panel | Features: crat...

power supply

• Manufacturer: TDK-Lambda Germany GmbH

Power: 280 W | Current: 1,5 A | Voltage: 230 V | Frequency: 50 Hz

gear motor

• Manufacturer: Bauer Gear Motor GmbH

Additional title: spur gear, three phase motor | Engine speed: 700 rpm | Gear unit speed: 98 rpm | Torque: 85 Nm | Power factor: 0 Cos ϕ | Power: 0,37 kW | Current: 1,45 A Y | Voltage: 380 V Y | Frequency: 5...

gear motor

• Manufacturer: Bauer Gear Motor GmbH

Additional title: Three-phase asynchronous motor, helical gear box | Operating hours: 0 | Engine speed: 1330 rpm | Gear unit speed: 56 rpm | Power factor: 0 Cos ϕ | Power: 0,33 kW | Current: 1,07 A | Voltage: 38...

braking resistor

• Manufacturer: SEW-Eurodrive

Resistor: Ohm | Power: W

Motor

• Manufacturer: SEW-Eurodrive

Motor with worm gear, hollow shaft and temperature Sensor

frequency converter

• Manufacturer: Danfoss GmbH

This frequency converter is available in the following sizes: VLT 5001 - 0.75 kW VLT 5002 - 1.1 kW VLT 5003 - 1.5 kW VLT 5004 - 2.2 kW Please indicate the desired flowmeter size.

2014 Achberg -

• Manufacturer: Achberg

Achberg Outside silo 62m3; weight 2300kg; bulk density 600kg/m3; max. overpressure +45mbar; max. underpressure -5mbar; opersting temp. max. 50°C; material ALMG3 Condition: Good

2014 Achberg -

• Manufacturer: Achberg

Achberg Outside silo 62m3; weight 2300kg; bulk density 600kg/m3; max. overpressure +45mbar; max. underpressure -5mbar; opersting temp. max. 50°C; material ALMG3 Condition: Good

2014 Cannon/Breyer -

• Manufacturer: Cannon/Breyer

Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate ...

2017 Cannon/Breyer -

• Manufacturer: Cannon/Breyer

Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate ...