Used Cnc Lathes in North Brabant, Netherlands

Fanuc CNC besturing

• Manufacturer: Fanuc

Also see misc634-misc635-misc637-misc638-misc639

Fanuc CNC besturing aiPS 22-B

• Manufacturer: Fanuc

Also see m634-m636-m637-m638-m639

Okuma LC10-2S CNC Lathe

• Manufacturer: Okuma
• Model: LC10

equipped with: Mayfran chip conveyor, foot control, Someca SAM40 oil pump with height adjusters, rack with various attachments,

2004 - Gildemeister CTV 250 - CNC lathe

• Manufacturer: Gildemeister
• Model: CTV 250
• Spindle bore: 52 mm

Equipped with: The Gildemeister CTV 250 is a vertical lathe, the lathe is ideal when short pieces with a large diameter need to be machined. Especially in the case of heavy parts, better results are achieved with...

Fanuc CNC 1 set books 30i/31i/32i model B

• Manufacturer: Fanuc

Also see misc634-misc635-misc636-misc637-misc639

DMG Gildemeister Graziano CTX 310

• Manufacturer: Gildemeister
• Model: CTX 310

DMG Gildemeister Graziano CTX 310 – CNC Lathe with Fanuc 32i • Hydraulic chuck with additional jaws • Water and water filter system Hours:

Cegielski ATE 63

• Manufacturer: Cegielski

Cnc mark: Fanuc | Cnc type: GE Fanuc Series O - T | Distance between the centers: 550 mm | Center height: 300 mm | Maximum turning diameter: 250 mm ø | Through: 63 mm ø | 3-klauwplaat: 130 mm ø | Spilmotor: 22 k...

Pinacho Taurus 260

• Manufacturer: Pinacho
• Model: Taurus 260
• Spindle bore: 52 mm

Cnc mark: Fagor | Construction year: 1999 | Distance between the centers: 1.500 mm | Center height: 260 mm | Turning diameter above the bed: 520 mm ø | Turning diameter above the support: 320 mm ø | Through: 80 ...

Okuma LC40

• Manufacturer: Okuma
• Model: LC40
• Spindle bore: 52 mm

Cnc mark: Okuma | Turning diameter above the bed: 600 mm ø | Turning diameter above the support: 480 mm ø | Maximum turning diameter: 600 mm ø | Maximum turning length: 500 mm | 3-claw automatic: 300 mm ø | Spin...

HAAS SL-40THE

• Manufacturer: Haas
• Model: SL-40
• Spindle bore: 100 mm

Cnc mark: Haas | Construction year: 2007 | Distance between the centers: 1.500 mm | Center height: 500 mm | Turning diameter above the support: 660 mm ø | Maximum turning diameter: 1,000 mm ø | Through: 105 mm ø...

Mulller Soltis 5

• Manufacturer: Mulller

Control: NUM Tplus | Construction year: 1997 | Distance between the centers: 2.000 mm | Center height: 290 mm | Turning diameter above the bed: 580 mm ø | Turning diameter above the support: 240 mm ø | Through: ...

Siemens (M621)

• Manufacturer: Siemens

Tos Tosnuc

• Manufacturer: TOS