Used Bottling Lines in Netherlands

Biagosch & Brandau DRS G-12

• Manufacturer: Biagosch & Brandau

Quality pre-owned dual lining machine. The Gunstar is Bibra's machine type for lining of round products with a speed of up to 400 ends per minute, depending on the product diameter. The ends coming into the machi...

Lomasa compound liner

• Manufacturer: Lomasa

Tooling: 100 mm | Can shape: round

1979 FMC 586 W

• Manufacturer: FMC

Tooling: 127 mm | Can shape: round | Speed (up to): 300 ends per minute

Schuler MGua 175

• Manufacturer: Schuler

Tooling: 99 mm | Can / ends diameter minimum: 48 mm | Can / ends diameter maximum: 163 mm | Can shape: round | Speed (up to): 150 ends per minute

GRACE FMC 586

• Manufacturer: FMC

GRACE FMC used automatic high speed single lane lining machine to apply water base compounds to tinplate or aluminium ends or round curled aerosol dome bottoms or aerosol cone tops.

Crabtree Marquess 4538 UV printing line

• Manufacturer: Crabtree

Pre-owned 1-colour printing line. Marquess press has a EPIC alcohol dampening system and curing is via Wallace Knight UV-oven with 3 lamps.

Food can manufacturing line Ø 83 mm

Pre-owned production line of open-top food cans. Line consist of Mawag KS 2 duplex slitter, Soudronic FBB 400 welding machine with FREI AG powder application system, curing oven, Blema KEZT 100 parting machine, G...

UN 20 liter conical pail line from MGR

Pre-owned manufacturing line for 20 LITRE conical pails. The line consists of, among others: ZHENGYI welder with 0.6 mm overlap, Jorson inside powder protection, ZHENGYI ouside lacquer unit, ZHENGYI induction cur...

1991 Cevolani welding line for manufacturing dry tea tins

• Manufacturer: Cevolani

Quality pre-owned Cevolani can making line Ø 211D consisting of: Cevolani CD 52 duplex slitter, Cevolani UCS automatic transfer system, Cevolani CBW 2042 bodymaker, Blema KEBS 100 flanger, Cevolani AT 410 B seamer.

2020 Naroska 2pc manufacturing line for Tuna and Sardine cans

• Manufacturer: Naroska

Running condition as new machine: Sizes of cans that can be produced Dia 83x38 mm /D83x40 mm/D83x43 mm and ¼ Club x 27.80 mm. Sheet layout of each size (mm) (D83x38 & 40)- 0.16 mm x 950.50 x 993.25 (TFS ) /(D8...

PLUG LID diameter 175 mm production line

Quality used Lug Lid manufacturing line consisting of: KD2326 40 ton stripfeed press, Sargiani S 945 CM 2T curling-lining machine.

Krupp / Cameron endline

• Manufacturer: Krupp

Quality used endmaking line consisting of Crabtree TF feeder, Krupp scroll shear, Cameron 314 stripfeed press with double disc curler. Stroke of the press is adjustable to 115 mm.

Compact manufacturing can making line canbody Ø 42 mm

Pre-owned line for Sweetened Condensed Dairy Blend (78 gram) canbodies, tops and bottoms. Diameter 42 mm, height 50 mm. Total installed base consist of: Krupp SDvt duplex slitter, Apolla blank transfer robot, Sou...

2012 Minster-Corima conversion line for Hansa and 99 mm EOE

• Manufacturer: Minster

Pre-owned production line for Hansa EO ends and round 99 mm EOE. Two presses Minster P2-75 with two Corima light tester, one Corima electrocoater and vertical drying oven existing of 2 lanes. Also available is th...

2006 LTG Mailander coating line with 36 meter tunnel-oven

Pre-owned varnishing line with type LTG 470 coater. Cooling zone is 6 meters long with double sheet stacking boxes. Incinerator also from LTG, running on Natural Gas, volume 10,000 Nm3/h. Total length of the line...