Used Processing in Poland

AMP VBF-60/60/100-1.5

• Manufacturer: AMP

was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long wo...

BATTENFELD BA 600 CDC

• Manufacturer: Battenfeld
• Model: BA 600 CDC

The was built in Austria in 2002. It is equipped with control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection...

VICTOR MSZ 30

• Manufacturer: Victor

was produced in 2015. The machine is used to produce bottles with a maximum height of ≤190mm and a maximum diameter of ≤100mm. It has a screw with a diameter of 40 mm, running at a speed of 10 to 225 revolutions ...

ZWUT PSK-1

• Manufacturer: ZWUT

was manufactured in Poland. The furnace is used for various types of laboratory and industrial work. The heating chamber of the furnace is resistant to high temperatures, thanks to fireclay and thermal insulation...

GT85 GT 2000-3P ultrasonic cleaner

The was manufactured in 2008. The machine consists of three bathtubs – the first bath is used for washing and phosphating, the second bath is used for rinsing and the third bath dries the product. The washing bat...

MAYER & MAYER DXR R2020R L-P-PUB PDX20 40-100 P

• Manufacturer: Mayer

of German manufacture was manufactured in 2015. The device is a filling station for hand-held dispensers with two-component glue with low and medium viscosity. The glue is loaded from pails or drums with a capaci...

ATLAS COPCO FX 7

• Manufacturer: Atlas-Copco
• Model: FX 7

was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...

BATTENFELD TM 1300

• Manufacturer: Battenfeld

was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...

2021 RYCSYSTEM

• Manufacturer: RYCSYSTEM

The bottling line is used for automated dosing, then filling and labeling of liquid products. These can be food products such as juices and beverages, as well as other products (chemicals, cosmetics, pharmaceutic...

2020 WENZHOU FURI MACHINERY CO. LTD. FRTB-SD3-C

• Manufacturer: WENZHOU FURI MACHINERY CO. LTD.

DIGI AW-5600FX

• Manufacturer: DIGI

DIGI AW-5600FX packaging machine

2020 AULONA MACHINERY S.r.l MPB – 25

• Manufacturer: AULONA MACHINERY S.r.l

2022 TOYO MACHINERY&METAL CO., LTD. Japonia Si-350-6S/JH750E

• Manufacturer: Toyo

Clamping force: 3430 kN | Screw diameter: 60 mm | Injection speed: 300 mm/s | Injection pressure: 220 MPa | Control: SYSTEM 800, Euromap 67, Euromap 73 interface