Used machine tools in Switzerland

STRIP STRAIGHTENING MACHINE “HFA” TYPE JMS-100

SKU: 2200038

Best Brands sheet metal machines in Switzerland

• Manufacturer: Best Brands

see Attach. at the bottom - Beyeler/Bystronic - COLGAR - Finn-/Prima-Power - Gasparini - LVD - Salvagnini - Schiavi - Trumpf ..... Floreani & Partners +39 393 577 2205 Alex/mob. alex.groupmarketing@gmail.com

1983 SMT MV20 BL5022

• Manufacturer: SMT

Maximum wall thicknesses: Material up to approx. 450 N/mm² max. 22mm (steel) Material up to approx. 750 N/mm² max. 17.5mm (stainless steel) Maximum diameter : dished end approx. 5000 mm Basket arch bottom approx....

BUCH DCMC-200-4/40-P-25

• Manufacturer: BUCH

Object: 43430

1987 PLATARG 912

• Manufacturer: PLATARG

The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...

2008 MÜLLER PMLE 250 X 2000 R-HK

• Manufacturer: Muller

Machine hours: 20,391 h (operating hours) Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm Equipment: - External connecting rods for high tilt stability - Hydraulic overload protection - Press force...

2004 ROSS

• Manufacturer: Ross

Press have force measuring device and tool protection device.

2023 FEINTOOL FB ONE 11000

• Manufacturer: FEINTOOL

Absolutely mint condition: just 3'300 running hours, 700'000 strokes Special equipment fineblanking press: + block hydraulics for 4th and 5th force. High pressure 30-270 bar. + mechanical reamers (without tool-bo...

1987 PLATARG 912

• Manufacturer: PLATARG

Standard Flat Plate Lifter Cams 13 Stations, 12 Rams + 1 Slave 6.50" (165 mm) long Stroke - checked and confirmed 3.11" (79mm) depth of draw Wedge Adjustable Rams with Standard Male Thread Tool Holders Platarg st...

1978 FEINTOOL GKP F 250

• Manufacturer: FEINTOOL

Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...

2003 SCHULER GRÄBENER GMO 2-315-2000-160

• Manufacturer: Schuler

Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles

1980 HILU SSP 140W

• Manufacturer: HILU

The machine is being sold by us on behalf of a customer. Unfortunately, a video is not available. The machine has been with the seller for over 15 years and has not been in operation since then. An inspection un...

PLATARG 611

• Manufacturer: PLATARG

Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm Maximum speed: 80 spm Example of an overhaule...

2001 ROVETTA S4-8000/4000X2000/E/ET

• Manufacturer: Rovetta

Machine has been dismatled and is stored in a warehouse

2005 ARKU RM 50X/9 ECOPLAN

• Manufacturer: Arku

Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...