Used Sheet Metal Processing in Switzerland

2025 PLATARG 312 HS Ref No: 48610

• Manufacturer: PLATARG

Object: 48610 | Controls: BECKHOFF | Number of slide actions: 13 | Slide force: 3 to | Stroke: 60 mm | Stroke rate (max.): 210 /min | Slide adjustment: 6 mm | Variable speed: yes | Stroke rate (min.): 70 /m...

1968 PLATARG 912 Ref No: 43817

• Manufacturer: PLATARG

Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top ...

1971 PLATARG 611 Ref No: 41435

• Manufacturer: PLATARG

Platarg transfer press 611 Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm

1987 PLATARG 912 Ref No: 46450

• Manufacturer: PLATARG

The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...

1977 PLATARG 611 Ref No: 43685

• Manufacturer: PLATARG

A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...

1969 PLATARG 312 Ref No: 40583

• Manufacturer: PLATARG

This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...

2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

• Manufacturer: Arku

Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

STRIP STRAIGHTENING MACHINE “HFA” TYPE JMS-100

SKU: 2200038

1978 FEINTOOL GKP F 250 Ref No: 48186

• Manufacturer: FEINTOOL

Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...

1996 FEINTOOL HFA 3000 Ref No: 48006

• Manufacturer: FEINTOOL

Coil line Feintool FTW 390/3 Object: 48006 | Controls: SIEMENS S5 135U | Drive system: hydraulic | Feedstock transport direction: left to right | Total force (nominal): 300 to | Stroke: 25 mm | Approximation ve...

2002 FEINTOOL HFA 8800 PLUS Ref No: 36813

• Manufacturer: FEINTOOL

Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...

1981 FEINTOOL GKP F 40 Ref No: 32359

• Manufacturer: FEINTOOL

Object: 32359 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 40 to | Stroke: 45 mm | Stroke rate (max.): 90 /min | Lower table (left-right): 280 mm | Lower table (f...

1971 FEINTOOL GKP F 50/80 Ref No: 36213

• Manufacturer: FEINTOOL

Example of an overhauled Feintool GKP 50/80 which can be applied to a machine we have in stock

1972 FEINTOOL GKP F 100/160 Ref No: 49648

• Manufacturer: FEINTOOL

Object: 49648 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 160 to | Stroke: 13 mm | Stroke rate (max.): 72 /min | Nominal force: 50 to | Lower table (left-right):...

ASAHI SEIKI TP-25 Ref No: 55479

• Manufacturer: ASAHI SEIKI

Asahi Seiki Model TP-25 new name, previous MTP 3-25 Make: Asahi Seiki Model: TP-25 Serial No: 50212 Year New: 1983 Condition: Used, Overall In Great Shape, Fully Operational 11 operation die set – Fuji Ori Air Cl...