Used Saws in Saitama, Japan

1995 Amada HFA-400

• Manufacturer: Amada
• Model: HFA-400

Product name: Band saw | Main specifications: OT240011 Cutting capacity: Round material φ420㎜ Square material w415×H415㎜ Saw blade speed 50Hz 15～90m/min 60Hz 17～90m/min

2005 Amada HFA-700CⅡ

• Manufacturer: Amada
• Model: HFA-700

Product name: Band saw | Main specifications: Cutting capacity: Φ290~Φ700mm, □700×800mm~30×290mm, saw blade dimensions (width/thickness/length): 67×1.6×8300mm, running speed: 15~120m/min (inverter speed change),...

1991 Amada HFA-300

• Manufacturer: Amada
• Model: HFA-300

Product name: Band saw | Main specifications: Cutting capacity: Φ330, □330×330, Blade dimensions: 32×1.066×4115mm

2006 Amada HFA300

• Manufacturer: Amada
• Model: HFA-300

Product name: Band saw | Main specifications: Cutting capacity: Φ330, □330 x 330, Blade dimensions: 32 x 1.06 x 4115

1986 Amada HA-700

• Manufacturer: Amada
• Model: HA-700

Product name: Band saw | Main specifications: Cutting capacity: Round material φ700, Square material W800 x H700, Saw blade speed 50Hz: 12-80m/min, 60Hz: 14-96m/min, Minimum clamp width 200, Chip conveyor

2007 Amada HFA250

• Manufacturer: Amada
• Model: HFA-250

Product name: Band saw | Main specifications: Cutting capacity: Φ250, □270×250, Blade dimensions: 27×0.9×3505

2019 Nicotech SSP-400D

• Manufacturer: Nicotech

Product name: Band saw | Main specifications: OH250008 Pass line: 800 mm Angle cutting: 0°, 45° Cutting capacity: 0° Round lumber: φ320 mm Square lumber: 400 mm (W) x 280 mm (H) 45° Round lumber: φ220 mm Square ...

1990 Amada V-400

• Manufacturer: Amada
• Model: V-400

Product name: Contour machine | Main specifications: Capacity: 250 high x 400 deep Saw blade speed: 15-19 m/m Saw blade dimensions: 3375-3535 Adjustment: 80 3-phase 200V Motor saw 1.5Kw Grinder 0.06kW

Makita CE001GZN

• Manufacturer: Makita

Power and high speed cutting exceeding engine type. Blade diameter 355mm Maximum depth of cut 127mm Wrench 13-19, coupling sleeve, ring 20 (OD Φ22) Φ25.4 Φ30.5) This product is This product is the main body only....

MSF-1300

Laboratory equipment

Artendorf F45 ProDrive

• Manufacturer: Ardendorf

Ascent and descent of the spindle is equipped with CNC control as standard. With easy-to-see large LCD display Enter the operation with the numeric keypad. The self-diagnostic function accurately displays the poi...

Synx SRP II

• Manufacturer: Shinx

Multi-stage hold down. LM guide running rail type saw table Rigid frame SINUC3500 Easy operation with touch type color LCD. Another operation can be performed while the machine is in operation. Easy input mode an...

Matsui Ironworks ZC-300

• Manufacturer: Matsui Ironworks

-Can be selected between 4' (12mm) and 5' (15mm) depending on the blade specifications. -The same thickness as the material to be installed is used as a ruler. The finish will be seamless. -Can be used for new co...

SYNKS SPN2

• Manufacturer: SHINX

No.1 installation rate in Japan. Digital positioning ruler control specification with a height of 1,800mm. 1. linear guide rail is adopted for the lifting rail, and more accurate cutting processing is achieved. 2...

Makita JR002GRDX

• Manufacturer: Makita

Ironworker cutting speed Increased by approx. 50 *Compared to our conventional machine Steel pipe (Φ34×3mm thickness) Battery BL4025 x 2, Charger DC40RA, Case, Reciprocating saw blade (BIM48/steelworker)