Used Machine Tools in South Carolina, USA

Hyundai Wia VX-500 Machining Centers

• Manufacturer: Hyundai - Wia

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/...

Brown and Sharp Surface Plates

• Manufacturer: Brown & Sharpe

Brown and Sharp Surface Plate, Grade B, 24" x 36" x 4" thick, with stand, S/N 3294 Stock# UD100243Specifications: Tool room Grade: B Size (W x L x T): 24" x 36" x 4" Weight: 500 lbs

Heckert 315S Millers

• Manufacturer: Heckert

Heckert 315S, 28-1400 RPM, Sony DRO,S/N 315212/129 Stock# UD100390Specifications: Table: Table working surface: 49" x 12.4" Longitudinal travel: 33-1/2" Cross travel: 11" Vertical travel: 14" T-Slots - Number &...

Ross 4 x 8 Mills

• Manufacturer: Ross

Ross 4 x 8, T.R.M. floor model high speed three roll mill, S/N 70520 Stock# UD100202Specifications: Estimated production rate: 1-5 Gal./Hour Roll diameter: 4" Roll length: 8" Front roll speed: 270 RPM Electrics:...

Kalcon-Molan PCF-120 Coolant Filtering Systems

• Manufacturer: Kalcon-Molan

Kalcon-Molan PCF-120, coolant sump pump and filtration cart, 120 gallon tank, 3 HP, S/N SM-2457 Stock# UD48250Specifications: Tank Capacity: 120 gallons Vacuum Pump: 3 Hp Main Pump CFM 105 CFM Discharge Pump: 1/...

MVM 2500 Grinders

MVM 2500, knife grinder with magnetic chuck and grinding spindle Stock# UD10062098.5" grinding capacity length 8.5 HP Motor 8" Grind Wheel Diameter 3400/1700 Grinding Wheel Speed (RPM) 90 degree swiveling magneti...

Heckert FU-400 x 1600 APUG Millers

• Manufacturer: Heckert

Heckert FU-400 x 1600 APUG, Heavy-Duty Combination Horizontal/Vertical Knee-Type Production Milling Machine, S/N 326211/201 Stock# UD100356Specifications: Working surface: 16-1/4" x 63" Number of t-slots: 5 Wid...

Dumore #57-031 Tool 57-031 Grinders

• Manufacturer: Dumore

Dumore #57-031 Tool 57-031, #57-031 Tool Post Grinder, 3/4 HP, 120 volt, 3 ph, 60 cy., S/N 8526 Stock# UD100333Call, no additional specifications at this time.

Fryer VB60 Machining Centers

Fryer VB60, Siemens Touch 2200, 60" (X) x 30" (Y) x 28" (Z), 25 HP, 8,000 RPM, two speed gearbox, 20 tool ATC, 1,000 IPM rapid, w/probe, chiller, S/N 60294, 2011 Stock# UD100573Specifications: Machine Capacity: ...

Accu-Finish Lapping Machines

Accu-Finish Tool Lapping/Grinder Stock# UD100384Specifications: Wheel diameter: 6" Arbor hole: 1/2" Spindle speed: 240 RPM Electrics: 115V/60HZ Dimensions: 13.25" L x 17" D x 11" H Weight: 47 LBS

Haas VF2SS Machining Centers

• Manufacturer: Haas
• Model: VF-2SS

Haas VF2SS, Inline spindle, 24 Station Cam Type ATC, 12,000 RPM, 1400 IPM, S/N 37352, 2004 Stock# UD100600Specifications: Table size: 14" x 36" Table load capacity: 1,500 lbs. Rapid traverse rates (X, Y & Z): 1,...

Okuma Millac 1052V Machining Centers

• Manufacturer: Okuma
• Model: MILLAC 1052V

Okuma Millac 1052V, OSP P200M, 41.73" Y-axis, 80.71" X-axis, 31.5" Z-axis, 6,000 RPM, Cat 50, CTS, 36 ATC, 1,000 PSI, S/N 11389, 2008 Stock# UD100589Specifications: Capacity: X axis travel: 80.71" Y axis travel:...

Haas VF 0 Machining Centers

• Manufacturer: Haas
• Model: VF-O

Haas VF 0, 16 Station Drum ATC, Rigid Tapping, 7,500 RPM, S/N 19420, 1999 Stock# UD100601Specifications: Table size: 14" x 26" Table load capacity:: 3,000 lbs. Rapid traverse rates (X, Y & Z):: 710 IPM Travel: X...

Haas TM-1 Machining Centers

• Manufacturer: Haas
• Model: TM-1

Haas TM-1, tool room mill, 12" x 30", 4,000 RPM, 7.5 HP, S/N 26282, 2001 Stock# UD100576Specifications: Capacity: X Axis: 30" Y Axis: 12" Z Axis: 16" Table size: 10.5" x 47.75" Table load: 1,000 lbs. Spindle: T...

Ward-Riddle D-18 Drills

• Manufacturer: Ward-Riddle

Ward-Riddle D-18, Drillmation gun drill, 1" x 18" capacity, with assortment of tooling, 1971 Stock# UD100577Specifications: Spindle stroke: 18" Drilling capacity: 1/4" - 1" Spindle speeds: Variable Feed rate by ...

Kitamura Mycenter 2XIF Machining Center

• Manufacturer: Kitamura
• Model: Mycenter 2XIF

Good condition Kitamura Mycenter 2XIF Machining Centers available between 2003 and 2004 years. Located in USA and other countries. Click request price for more information.