Used Machine Tools in Oregon, USA

Invicta Panel Saw, 2-Saw, 10’ Wide Sliding Table Panel Saw

Used Invicta 2-Saw, 10' Wide Sliding Table Panel Saw. Model RP31 Tetra "A". Built in 2002. Adjusts from 12" to 120". Saw stations are both adjustable to 45 degrees. Main saw motors are approx. 5HP and have 1...

New Oliver Cut-Off Saw, Model 5015.002 14" Cut Off Saw

One (1) New Oliver Model 5015.002 14" Cut Off Saw with 7-1/2HP 3 phase dual voltage motor prewired for 230 volts. 4100 RPM arbor speed. Left Hand Model uses a 14" diameter saw blade with 1" bore. Cuts boards u...

New Oliver Cut-Off Saw, Model 5025.002 18" Cut Off Saw

One (1) New Oliver Model 5018.002 18"Left Hand Cut Off Saw with 7-1/2HP 3 phase motor prewired for 230 volts. 3450 RPM arbor speed. Left Hand Model uses an 18" diameter saw blade with 1" bore (saw blade not inc...

Invicta 2-Saw, 10' Wide Sliding Table Panel Saw

Used ) Invicta 2-Saw, 10’ Wide Sliding Table Panel Saw. Model RP31 Tetra “A”. Built in 2002. Adjusts from 12” to 120”. Saw stations are both adjustable to 45º. Main saw motors are approx. 5HP and have 14” di...

SELCO Model EB100 Front Load Horizontal Beam Panel Saw

• Manufacturer: Selco

Used SELCO Model EB100 Front Load Horizontal Beam Panel Saw Max. Cutting Length: 3800mm - Max. Pusher Stroke: 3200mm - Max. Blade Projection: 100mm - Max. Gripper Opening: 97mm - Automatic Side Squaring Device - ...

SAFETY SPEED CUT Model 7400 Vertical Panel Saw

One Used SAFETY SPEED CUT Model 7400 Vertical Panel Saw (American made) Standard Equipment • 3 Hp continuous duty induction saw motor, 7.6 amps 230 volt 3 phase with optional Scoring Blade • Maximum crosscut 6...

Industrial Model N510R Right Hand High Speed Chop Saw, Air Lift

Industrial Model N510R Right Hand High Speed Chop Saw, Air Lift. 7-1/2 HP 208-230/460V motor, 2” X 12” capacity. Adjustable cycle speed up to 90 strokes per minute. Requires compressed air at 60 PSI minimum at...

Industrial Model N510L Left Hand High Speed Chop Saw, Air Lift

Industrial Model N510L Left Hand High Speed Chop Saw, Air Lift. 7-1/2 HP 208-230/460V motor, 2” X 12” capacity. Adjustable cycle speed up to 90 strokes per minute. Requires compressed air at 60 PSI minimum at ...

Precision Model 18 Left Hand, Air Operated, 2” X 12” Capacity High Speed Pneumatic Chop Saw

One (1) Used Precision Model 18 Left Hand, Air Operated, 2” X 12” Capacity High Speed Pneumatic Chop Saw. Includes 12’ stop bar. See photos of Precision Model 18 Left Hand, Air Operated, 2” X 12” Capacity High ...

Armstrong Bandsaw Sharpener, No. 4 Right Hand Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong No. 4 Right Hand Bandsaw Sharpener, Older Model but with many modern upgrades, complete with Sequoia Saw Systems DigiCam Programmable Tooth Pattern System. Now supported by Wright (Burton Saw), this sys...

CASTALY Cut-Off Saw, Model CS-24R Pneumatic Cut-Off Saw

One (1)CASTALY Model CS-24R Pneumatic Cut-Off Saw, 24” Right Hand with a cutting capacity of 8x11, 6x14, 4x16 and 2x17. Uses 18” to 24” diameter sawblade with 1” arbor. 10 HP motor 2400 RPM wired for 440 volts....

Western Pneumatics Chop Saw, Model 18RHA 2"x12" Capacity Air Operated Chop Saw

Western Pneumatics Model 18RHA 2"x12" Capacity Air Operated Chop Saw. See photos of Western Pneumatics Model 18RHA 2"x12" Capacity Air Operated Chop Saw on our web site. Inventory No.11342C. Located at our Port...

Precision Chop Saw, 14RHM 2"x8" Mechanical Operation Chop Saw

Precision 14RHM 2"x8" Mechanical Operation Chop Saw. See photos on of Precision 14RHM 2"x8" Mechanical Operation Chop Saw our web site. Inventory No. 12245. Located at our Portland, Oregon facility

Armstrong Bandsaw Sharpener, No. 2 Left Hand Automatic Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong No. 2 Left Hand Automatic Bandsaw Sharpener. For saws up to 8" wide. Complete with a set of post brackets, motors, starters, and one set of standard cams. S/N 6375. Good condition. See photos of Ar...

New CROSSCUT SOLUTIONS Cut-Off Saw, Model CCS-18P Cut-Off Saw,

One New CROSSCUT SOLUTIONS Model CCS-18P Cut-Off Saw, (right or left hand models) pneumatically operated, 2" x 12" capacity, 7 1/2 HP motor, TEFC 230/460 volt 3 phase, 60 cycles, includes magnetic starter with 11...

Hardinge DSM 59 Lathe

• Manufacturer: Hardinge
• Model: DSM 59

Good condition Hardinge DSM 59 Lathes available between 1960 and 1972 years. Located in USA and other countries. Click request price for more information.