Used Machine Tools in Indiana, USA

CKD RGIT140-008300S1F1 Rotary Indexer Table 8-Stop 300° 230V 3PH 40:1 Drive

• Manufacturer: CKD

In Good Used Condition. Removed from a Working Environment. Unit has a 47mm riser installed. 8-Stop indexer, 140mm shaft interval, 300° total index angle. 275mm table mounting Dia. Center shaft 75mm OD x 54mm ID...

CKD RGIT140-008300S1F1 Rotary Indexer Table 8-Stop 300° 230V 3PH 30:1 Drive

• Manufacturer: CKD

In Good Used Condition. Removed from a Working Environment. Unit has a 4-1/8" riser installed. 8-Stop indexer, 140mm shaft interval, 300° total index angle. 275mm table mounting Dia. Center shaft 75mm OD x 54mm ...

CKD RGIT080-004300S1F1 Rotary Indexer Table 4-Stop w/Torque Limiter -No Drive-

• Manufacturer: CKD

In Good Used Condition. Removed from a Working Environment. -No Drive for this unit- Unit has a torque limiter clutch installed. TST-11-A RGIT110 4-Stop indexer, 80mm shaft interval, 300° total index angle. Cen...

Omga T521ST 18-20" Wood Cut Off Saw 5.6kw Upcut Pneumatic Control 230/460V 3Ph

• Manufacturer: Omga

Used, in Good Working Condition, Tested OK. This is for a 18" blade but 20" blade is optional. This unit comes with a 500mm blade which is basicly a 20" blade. Pneumatic foot pedal to activate cutting. 12-5/8" cr...

Vibro Dynamics 16M3000 Micro/Level Isolator Machine Foot Vibration Mount 4pcs

• Manufacturer: Vibro Dynamics

In good used condition. Set of 4 machine pads. 16.3"L x 13.3"W 6.25"H. 1-1/4-12 threaded No bolts. If this item ships as Flat Rate Freight please see details in Shipping tab

Cucchi BLT Multi-spindle Bar Loader

• Manufacturer: Cucchi

Cucchi BLT Multi-spindle Bar Loader

Milling Base Leveler Feet Machine Isolator Rubber Mounting Pads 20x14" Lot of 3

Used, in Good Working Condition. Removed From a Working Environment. Machine leveling feet. Rubber 480x320mm mounting pad Frame is 20-3/4" x 14-5/8" Current height is 7-1/2" high If this item ships as Flat Rate F...

Industrial Machine Leveling Feet 13x16" Pad 1.5"-12 Thread Set of 4 Green

In good used condition. Set of 4. These vary slightly in size 16-1/4" to 16-1/2" Length 13-1/4 to 13-1/2" Width 5-1/4" height. 12" bolt thread length. 1.5"-12 fine thread. 150 Lbs each. If this item ships as Fla...

Walsh No 24 Ton Mechanical Punch Press 2" Stroke 6.5" Throat 2Hp 230/460V 3Ph

• Manufacturer: Walsh
• Stroke length: 2 millimeter

Ram Bolt Distance (Center to Center) (Inches): 8 Throat Opening (Frame to Center of Ram) (Inches): 6-1/2 Used, in Good Working Condition, Tested. We had to replace an operate button. Only had a red one. This unit...

Hobart RC-301 Mig Welder 300 amp 120V Feeder 208/230/460 3PH With Cart Profax

• Manufacturer: Hobart
• Model: RC-301

Tested And Working Hobart 120V 2 wire feeder Wired for 460V Cart included Profax mig gun included. If this item ships as Flat Rate Freight please see details in Shipping tab

Motion MG-580-3-300 Rotary Table Indexer 3 Position Rotator 1Hp 230/460V

• Manufacturer: Motion

Used, in Good Working Condition. Tested. This is a 3 position indexer. Hollow in the center. Comes with an air rotary coupler The round top is 400mm or 16". 230/460V Sew motor. Wired for 480V 3Ph Product Videos I...

Grahan 28-280 Rotary Table Indexer Drive 12 Position Rotator Hydraulic

• Manufacturer: Grahan

Used, in Good Working Condition. Tested. This is a 8 position indexer. Hydraulic powered. The round top is 28". Adjustable stops. Up to 30 stations 12 degree min If this item ships as Flat Rate Freight please see...

Miller Maxstar 152 Tig Welder 120 Amp CC-DD Snap Start II 230V 1 Phase Tested

• Manufacturer: Miller
• Amperage: 120 ampere

Used, in Good Working Condition. Tested in our shop. One lug is loose. Still works just mounting is broken. Bad display readout. This has the Snap Start II system to go with the power unit. If this item ships as ...

Challenge Granite Surface Inspection Plate 96x48x10" Table Grade B Type 8x4'

• Manufacturer: Challenge

Used, in Good Working Condition. Top is 8x4' or 96x48" 10" thick. Looks to be grade B. Has some chips on the side from handling. Top is at 33-1/2" tall. If this item ships as Flat Rate Freight please see details ...

Rock of Ages 4x8' Granite Surface Inspection Plate Table 96x48x14" Layout

• Manufacturer: Rock of Ages

Used, in Good Working Condition. This top has some imperfections. This is out of grade. See photos Top is 8x4' or 96x48" 14" thick. Looks to be grade B. Has some chips on the side from handling. Top is at 34" tal...