Used Machine Tools in Community of Madrid, Spain

Klinghammer 430

• Manufacturer: Klinghammer

Diameter range: 45 – 125 mm | Heihgt range: 55 – 350 mm | Maximum production: 60 cpm | Tooling: Ø 86 mm

Shin-i SB 14AL

• Manufacturer: Shin-i

Diameter range: 52 – 170 mm | Height range: 50 – 275 mm | Speed production: 120 cpm | Tooling: Ø 127 & 153 mm | Number of stations: 4

Semiautomatic Pail Line

MGR Automatic Roll Former Soudronic NRZd-12 Semiatomatic Body Welder MGR F4 Automatic Expander Automatic Seamer

Atuta Automatic Roll Former

• Manufacturer: Atuta

Diameter range: 50 – 150 mm | Maximum output: 30 cpm

Kpll Automatic Duplex Slitter

• Manufacturer: KPLL

Speed production: 45 sheets per minute | Shaft diameter: 80 mm | Maximum sheet width: 1.100 mm (useful cut 1.000 mm) | Maximum sheet height: 1.100 mm (useful cut 500 mm) | Set of knives: 5 in first table / 11 in...

PROIN CUT-TO-LENGTH

• Manufacturer: Proin

Old CTL, with good leveler -17 rolls- and film recoiler. For cold rolled, galvanized and coated material. Lowest price due to need of space.

Cenzano Semiautomatic Round Flanger

• Manufacturer: Cenzano

VCM Automatic Roll Former

• Manufacturer: VCM

Sargiani Automatic Roll Former

• Manufacturer: Sargiani

Diameter range: 100 – 400 mm | Maximum sheet width: 600 mm | Maximum load: 2.000 kgs.

Automatic Round Line diameter 83,7 mm

Soudronic ABM 250W Automatic Body Welder Cevolani B3 05 Automatic Flanger Cevolani AT60 Automatic Bottom Seamer Angelus 60L Automatic Top Seamer Comaco Zeccheti PA700VL Automatic Palletizer

Kpll Automatic Round Flanger

• Manufacturer: KPLL

Diameter range: 50 – 200 mm | Height range: 50 – 400 mm | Maximum production: 70 cpm | Tooling: Ø 165 mm

Klinghammer 481

• Manufacturer: Klinghammer

Diameter range: 45 – 215 mm | Height range: 50 – 350 mm | Speed production: 70 cpm | Tooling: Ø 108 mm

Cevolani BT 05

• Manufacturer: Cevolani

Diameter range: 50-130 mm | Height range: 40-175 mm | Tooling: Ø 83,7 mm | Maximum production: 350 cpm | Number of heads: 6

Metalbox 200F/6

• Manufacturer: Metalbox

Diameter range: 52 – 113 mm | Height range: 28 – 185 mm | Speed production: 300 cpm | Tooling: Ø 65 & 100 mm | Number of heads: 6

Carnaud Metalbox Automatic Duplex Slitter

• Manufacturer: Metalbox

Shafts diameter: 105 mm | Table dimensions: 1150 x 1150 mm | Widia blades: 6 at first table & 7 at second table | Power supply: 380 V / 50 Hz | Crabtree-vickers automatic feeding system: included | Automatic sta...