Building Filters
C200 Machinery
Compact specifications for high-precision finishing machine Highly rigid sliding guideway on the X-axis absorbs heavy cutting loads and ensures stable machining accuracy. Pre-tensioned ball screw suppresses therm...
Tokyo, Japan
B0125C/B0126C
Compact type with reduced depth is added to the B012 series Rear spindle and turret allow overlap machining of front and rear surfaces. Compact design with minimal overhang. Depth is reduced by 39% compared to co...
Tokyo, Japan
B0123C
Compact type with reduced depth is added to the B012 series lineup Compact design with minimal overhang. Depth is reduced by 39% compared to conventional models. Maximum rotational speed of 8,000 min -1 The front...
Tokyo, Japan
B073-VR/B075-VR
Ideal for machining high-precision micro parts such as communication connectors and clock parts Instead of a toggle, Tsugami's original chuck opening/closing mechanism with superior response and balance character...
Tokyo, Japan
B0123-VR/B0203-VR
High-precision machining with a structure that is faithful to the basics Basic machine with small investment and large profit ●High output built-in motor is used for the main spindle to enhance machining capacity...
Tokyo, Japan
B026V/32V-Ⅲ series
Large tooling area allows optimum tooling for each application. Rear turret with Y-axis enables rear complex machining and complete overlap machining with the spindle side (6-axis machine). Modular tooling allows...
Tokyo, Japan
C150 Machinery
Only 1m 2 Production system condensed into a space of Floor space 1m 2 Space-saving Production-type ultra-precision machining Dimensional accuracy 6σ=0.5μm (brass) 3-inch chuck with maximum spindle speed of 15,00...
Tokyo, Japan
C300-V
Applicable to both chuck workpieces and bar workpieces Built-in motor drive reduces vibration, improves surface roughness, and extends tool life. Spindle cooling system is equipped as standard to reduce thermal e...
Tokyo, Japan
B038T
Y-axis control of turret + gang blade + back turret The 8-face turret allows multiple tools to be mounted on the wide turret face, and tools can be changed by moving the Y-axis. Y-axis combined machining is possi...
Tokyo, Japan
SS267-Ⅲ/SS327-Ⅲ/ SS267-Ⅲ-5AX/SS327-Ⅲ-5AX
Swiss-turn equipped with B-axis for advanced multitasking machining Simultaneous 5-axis machining is possible with an automatic machine (SS267-Ⅲ-5AX/SS327-Ⅲ-5AX). B-axis controlled rotary tools allow machining fr...
Tokyo, Japan
SS207-Ⅱ/SS207-Ⅱ-5AX
Swiss-turn equipped with B-axis for advanced multitasking machining Simultaneous 5-axis machining is possible with an automatic machine (SS207-II-5AX). B-axis controlled rotary tools allow machining from any angl...
Tokyo, Japan
p013/p033/p053/ P014/P034/P054
Ideal for mass-production machining of small-diameter parts such as contact probes and watch components ●Dimension change from cold start is reduced by adopting thermal countermeasures and automatic compensation ...
Tokyo, Japan
BM163-VR/BM165-VR
Dedicated machine for guide bushless Overlap processing of front and back surfaces possible (BM165-VR) Ceramic ball bearings are used for the front bearing. No grinding material required. High-precision machining...
Tokyo, Japan
BW127J-II/BW128J-II/BW128ZJ-II/BW129ZJ-II/BW207J-II/BW208J-II/BW208ZJ-II/BW209ZJ-II
Versatile overlap processing improves productivity Dramatically shortens cycle time Simultaneous 3-system control enables various overlap machining with each independently controlled turret. 5mm Z-axis travel of ...
Tokyo, Japan
B026/32-Ⅲ series
Many functions are provided in a compact body. A full range of machining variations and a variety of options enable optimal tooling for each application. Rear turret with Y-axis enables backside composite machini...
Tokyo, Japan