Machine Tools » Grinding machines » Saxony

Building Filters

10

Used threading in Saxony, Germany

Trusted Seller
FEIN angle grinder
- Manufacturer: Fein
Angle grinder, long-neck angle grinder, compact angle grinder, low voltage tool FEIN MSfv 649 0.75 KW 12000 rpm 220 V 1AC 50 Hz used, tested, picture similar !
$339 USD
Zschepplin, Germany
Trusted Seller
FEIN angle grinder
- Manufacturer: Fein
Angle grinder, long-neck angle grinder, compact angle grinder, low voltage tool FEIN MSfv 749 0.75 KW 12000 rpm 42 V 1AC 50 Hz used, tested, picture similar !
$293 USD
Zschepplin, Germany
Trusted Seller
EX-CELL-O grinding spindle
- Manufacturer: Ex-Cell-O
Grinding spindle EX-CELL-O Type 771.860.5 Shaft diameter: Ø 40 mm, length: 80 mm, thread: M40 x 1.5 Mounting flange Drive flange used, tested !
$1,627 USD
Zschepplin, Germany
Trusted Seller
PAGUS shaft for grinding spindle
- Manufacturer: Pagus
Shaft for grinding spindle, Grinding spindle shaft PAGUS 1 - Cone: Ø 21.5 / 25 mm, length: 27 mm, with internal thread M12 x 1.5 ( left-hand thread ), depth: 40 mm 8 - Thread: M35 x 1.5, length: 10 mm, with circl...
$374 USD
Zschepplin, Germany
Trusted Seller
CZ Grinding spindle
- Manufacturer: Pagus
Grinding spindle CZ IBC 80 250 T Tool holder: Ø 10 mm, length: 10 mm Internal thread: M5 x 0.8, depth: 25 mm Tool holder ( screw-on ): Ø 10 mm, length: 15 mm Internal thread: M6 x 1.0, depth: 20 mm Flat belt pull...
$550 USD
Zschepplin, Germany
Trusted Seller
DKF grinding spindle
- Manufacturer: DKF
Grinding spindle DKF 3.8 - 7 / 1 ( 3.8-7/1 ) TGL 4870 ( TGL4870 ) Ø 80 mm M15 x 1.0 left-hand thread
$614 USD
Zschepplin, Germany
Trusted Seller
DKF grinding spindle
- Manufacturer: Pagus
Grinding spindle DKF 2.6 - 4 / 1 ( 2.6-4/1 ) TGL 4870 ( TGL4870 ) Ø 60 mm Drive: Ø spigot: 17.9 mm; Ø thread: M10 x 1
$445 USD
Zschepplin, Germany
Trusted Seller
SFJ grinding spindle
- Manufacturer: Pagus
Grinding spindle SFJ HJ860 Tool holder: Ø 9 mm, length: 15 mm Internal thread: M5 x 0.8, depth: 25 mm Flat belt pulley: Ø 30 mm, width: 25 mm, barrel-shaped used, tested !
$562 USD
Zschepplin, Germany
Trusted Seller
RAY AG Grinding head
- Manufacturer: RAY AG
Grinding head, motor spindle, spindle motor RAY AG Zurich 6000 - 15000 rpm Machine side: Flange diameter: Ø 150 / 116 / 72 mm all threaded holes: M6 x 1.0, depth: 12 mm with accessories and wooden box used, tested !
$1,006 USD
Zschepplin, Germany
Trusted Seller
PAGUS sanding block attachment
- Manufacturer: Pagus
Sanding block attachment PAGUS Motor: Type D 4/2 ( D4/2 ) 0,3 kW 2850 rpm 220 / 380 V 3AC 50 Hz Spindle: Ø 70 mm, length: 200 mm Outer cone: diameter: Ø 34 / 28 mm, length: 34 mm With thread: M24 x 1.5 Length: 17...
$328 USD
Zschepplin, Germany