Building Filters

Used Surface Grinding Machines in Gunma, Japan

2006 Nikko Machine NSG-64H
- Manufacturer: 日興機械
Chuck size 600×400 Fully automatic, automatic infeed, with magnetic separator, with cutting tank, with dust collector ★Test cutting has been performed! (Photos are being posted.) In case of any discrepancy betwee...
Tatebayashi, Japan
1989 Nikko Machine NFG-515A
- Manufacturer: 日興機械
Permanent magnetic chuck size 250 x 130 with left/right and front/rear feed with up/down fast feed with front/rear digital scale with dust collector (dry type) If there is any discrepancy between the contents and...
Tatebayashi, Japan
1989 Nikko Machine NFG-515A
- Manufacturer: 日興機械
Ei-magnet chuck size 250 x 125 with left/right and front/rear feeds, with top/bottom rapid feeds, with front/rear digital scale, with dust collector (dry type) If there is any discrepancy between the contents and...
Tatebayashi, Japan
1992 Kuroda Precision Industrial GS-63NC
- Manufacturer: Kuroda Precision Industrial
FANUC0M-C Chuck size 600 x 300 Stroke: X720 Y340 Z340 Grinding wheel outer diameter Φ455 x width 50 x inner diameter Φ127 Grinding wheel rotation speed 1460rpm If there is any difference between the content and t...
Tatebayashi, Japan
2007 Mitsui High-tec MSG-618PC-NC
- Manufacturer: MHT
Chuck size 350×150 Grinding wheel rotation speed 4000rpm ★Test cutting has been performed! (Photos are being posted.) If there is any discrepancy between the contents and the actual product, the actual product wi...
Tatebayashi, Japan
2008 Okamoto Kosaku PFG500DXNCSII
- Manufacturer: Okamoto
- Model: PFG-500
FANUC21i-MB Chuck size 350 x 150 Wheel size 205 x 32 x 31.75 In case of any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
1995 Hitachi Seiko GHL-NB 409 M
- Manufacturer: 日立精工
- Model: GHL-NB409M
FANUC0-M chuck size 800 x 400 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
2004 Nagase SGE-515SLD2E2T
- Manufacturer: Nagase
Chuck size 350 x 150 Magnetic separator In case of any discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1969 Ichikawa Seisakusho ICS-1230
- Manufacturer: 市川製作所
Chuck size 1200 x 300 If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1989 Okamoto PSG-64DX
- Manufacturer: 岡本工作
- Model: PSG-64
Chuck size 600 x 400 with magnet separator If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1983 Okamoto PFG-450B
- Manufacturer: 岡本工作
- Model: PFG-450
Angled chuck 355 x 125 If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
2010 Okamoto Kosaku UPZ210LiⅡ
- Manufacturer: Okamoto
- Model: UPZ-210LiII
Chuck size 170 x 100 with cylindrical device With indexing device If there is any discrepancy between the description and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1984 Okamoto Kosaku PSG-65AN
- Manufacturer: 岡本工作
- Model: PSG-65
Chuck size 600 x 500 Magnetic separator Fully automatic and automatic infeed with 2-axis digital scale ★Test cut was conducted! (In case of any discrepancy between the contents and the actual product, the actual ...
Tatebayashi, Japan
2004 Hitachi Seiko GHL-B406NS
- Manufacturer: 日立精工
- Model: GHL
Chuck size 600 x 400 Full automatic automatic infeed If there is any discrepancy between the contents and the actual product, the actual product will be given priority.
Tatebayashi, Japan
1998 Okamoto Kosaku PSG-64DX
- Manufacturer: 岡本工作
- Model: PSG-64
Chuck size 600 x 400, fully automatic, automatic cutting, with 2-axis digital scale, spindle inverter control, separator, dust collector included. *Test cut carried out! (Photos are available) *Spindle bearing re...
Tatebayashi, Japan