Used shop

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

2013 Pneumatic sand feeder KLEIN 75 l CE

Max. pressure 7 bar With pneumatic cone fastener Inlet Ø 100mm Outlet Ø 70mm With CE n° 0045

1998 Gassing unit coldbox LÜBER LW-FDA-825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Gas pressure is regulated by proportional valve Gas dosing is made by high speed counting All parameters are introduced in the machine panel -gassing pressure -main gassing pressure -pressure ramp -gassing time -...

horizontal centrifugal casting machine VEB

Motor VEM DDR, type ring CLU 296/4-FW15Z, 3,33 /10 kW, 220/380 V, 650/1950 rpm Each with a different shell diameter Available: 8 x Ø 230-231 mm, length 400 mm 1 x Ø 160-161 mm, length 440 mm With mechanical brake...

1986 Core sand mixing line KLEIN, ± 2 t/h

Vibratory mixer Sand distributor system Panel Without mixing vessel

Small screw conveyro, 920 mm, Ø 145 mm

External dimensions: length 2120mm, width 435mm, height 270mm Motor: 0,5 kW, 220/380 V, brand BAUER, 690 rpm, outlet: 19 rpm Second entrance possible

Core sand mixing plant STEFFENS, type SM30

Boltmixer, fastmixer Volume testing device for sand With 2 pumps With control board SIEMENS S5 With powder support With pneumatic depletion flap Spare mixer (second-hand) With cleaning flap

Mobil articulated arm screw mixer AXMANN, 10 t

• Manufacturer: Axmann

Dimensions: length 7200 mm, width 1900/1500 mm, height 3600 mm With rail trolley With sand hopper With pneumatic brake With 2 pneumatic slides for sand inlet

2005 Core sand mixing plant LAEMPE SM7, 3 t/h

• Manufacturer: Laempe / Röperwerk

With sand bunker and volumetric dosing With electric sand preheater Resin and hardener dosed by volumetric glass tube pumps (bulbs) With additive (powder) hopper, volumetric dosing

Moulding boxes, steel, 910 mm x 685 mm x 265 mm

With trunions With oval and round bushes, ± 25 mm Usable from 2 sides

Pouring ladle COLLIN, ± 600 kg

External dimensions: length 1350 mm, width 720 mm, height 1740 mm With worm wheel gearbox With bolt on trunions With ventilated suspension ring With 2 pouring spouts

1988 Jolt squeeze moulding machine KÜNKEL WAGNER APM-S-2

• Manufacturer: Künkel Wagner

With c ontrol box AEG Automate Logistta A020 With two-hand control desk

1996 Screw mixer WÖHR, 5 t, 1 swivelling arm

• Manufacturer: Wöhr

Engine: 12 kW, 400 V, 50 Hz, serial number: 345287 Continuous screw mixer WÖHR 3 pumps PTS-acid Beta-set Sand dosing slide With automatic sand dosing With 3 compartiment sand hopper on feet Control board SIEMENS ...

Moulding machine ZIMMERMANN GV3

• Manufacturer: Zimmermann

Brand: ZIMMERMANNType: GV3 With control board SIEMENS S5 and two-hand control desk New valves ISO

Overband magnet 650 mm, 2,2 kW

• Manufacturer: EUGEN SEITZ

External dimensions: length 1700 mm, width 1050 mm, height 580 mm Engine: 2,2 kW, 220/380 V, type: drum engine With suspensions on wheels for an easier dismantling