Used second hand forklift in Wallonia, Belgium

Casting ladle with planetary gear and feet for lifttrack, 2,5 t, teapot

With feet for lifttrack and with lining With teapot spout 4 sides in metal sheet

1998 Teapot spout ladle with planetary gear and feet for lifttrack, 3 t

With feet for lift track and good lining 4 side metal sheet

Core transport trolley, 3 supports, FREIMUTH

Year of construction: 2008, weight: ± 300 kg With 4 wheels and 2 forklift pockets With 2 supports flapping upwards by gas springs

2001 Coating basin stainless steel ±1,5 m³

External dimensions: length: 1700mm; width: 1400mm, height: 1850mm Useful dimensions: length: 1600mm; width: 1300mm; height: 800mm Capacity ±1.5m³ WITHOUT agitator With substructure + forklift feet Trolley movabl...

2001 Coating basin stainless steel ±1,5m³

External dimensions: length: 1700mm; width: 1400mm, height: 1850mm Useful dimensions: length: 1600mm; width: 1300mm; height: 800mm Capacity ±1.5m³ For water coating With 1 agitator; 3 kW With substructure + forkl...

Furansand mixing plant FRANK

700 rpm Mixer installed in a framework with 2 mobil bunkers, each 1,5 m³ useful content To pose with the lift truck With 2 pumps, resin injection and cat, 2 speeds, mixing screw Ø 130 mm, between entry and exit 8...

Bottom pouring ladle ROPER, 3,5 - 4 t

Useful Ø 1140mm, useful height 1140mm Wth oil bath gearbox, lining and lifting bail protection

Treatment ladle SOPAME ±3t

• Manufacturer: SOPAME

Useful dimensions: Ø800mm, height: ±1400mm With 2 pouring spouts With heat protection With 2 lifting anchors at the corners of the swivel arm With oil bath worm gearbox

Pouring ladle UTARD, ±350kg, motorized

Dimensions: length: 1080mm; width:830mm; height: 1170mm Useful dimensions : Ø550mm; Height: 520mm Brand: SEW; Type: gear box; 0,22KW; 30 und 62r/min; 400V With cable and hand switch With present refractory with 2...

Vibrating table 1300 x 1050 x 850mm

Motor CASADIO type vibrator 2 x 2 Kw, 3060 rpm, serial number 263921, 220/380 V Lifting over 4 pneumatic ball, control over pedals Fixing of the model pattern over solid driven pistons With 2 rolling tabls, total...

Casting ladle, ± 2,3 t, COLLIN

With with oilbath gearbox With ring of lifting Outside dimensions: 1900mm x 1100mm, h. 2100mm | Useful dimensions: Ø 1000mm, H (without concrete) 1050mm

2018 Pouring ladle ACETARC, with transport foot, ± 1600 kg

External dimensions: length 1600mm, width 1350mm, height 1700mm With useful lining With one long and one small spout With bold-on trunnions With transport foot for lift tracs With heat protection With type plate ...

1998 Core shooter LAEMPE LB20

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...