Used Forging in Ohio, USA

2012 INDUCTOTHERM VIP POWER TRAK

• Manufacturer: Inductotherm

Inductotherm VIP Power Trak, 75 KW, 3200 HZ, 100 Lift Swing

2005 INDUCTOTHERM VIP POWER TRAK 750-10CR

• Manufacturer: Inductotherm

Inductotherm Induction Melting Furnace, VIP Power Trak 750-10CR, 750 Kw, 1200 Hz, 6000 Lb Duraline Hydraulic Tilting Box, S/N 04E-178219-335-11

ATMOSPHERIC LADLE HEATER

• Manufacturer: ATMOSPHERIC

Atmosphere Ladle Heater, 3Ton

GFM No. SKK10 ROTARY FORGING MACHINE

Forging box: Shear force per hammer: 1250 kN Number of hammers: 4 Strokes per min: 1500 / min Diameter adjustment range: 60 mm Forging eccentricity: 2.5 mm Hammer length: 106 mm Bar/Tube diameter max: 58 mm Cla...

AJAX MODEL #6 FORGING ROLL

Width of Roll dies ................................. 60" Maximum roll die dia. .............................. 44" Maximum Length rolled section ...................... 82" Weight, approx. ............................

NATIONAL MODEL #4 REDUCER FORGING ROLL

NATIONAL MODEL #4 REDUCER FORGING ROLL SERIAL ....................... 22627 MODEL ........................ #4 MAXIMUM STOCK SIZE ........... 2-1/4" DIAMETER OF ROLL ............. 10" ROLL WIDTH ...................

AJAX #O INBOARD OUTBOARD FORGING ROLL

AJAX #O INBOARD OUTBOARD FORGING ROLL Serial: 9626 Model: #O Width of Roll Dies Half Round......................... 14" Flat Back.......................... 14" Overhung........................... 6" Max. Rol...

AJAX #O INBOARD OUTBOARD FORGING ROLL

AJAX #O INBOARD OUTBOARD FORGING ROLL Serial: 4626 Model: #O Width of Roll Dies Half Round......................... 14" Flat Back.......................... 14" Overhung........................... 6" Max. Roll ...

AJAX #O INBOARD OUTBOARD FORGING ROLL

AJAX #O INBOARD OUTBOARD FORGING ROLL Serial: 4677 Model: #O Width of Roll Dies Half Round......................... 14" Flat Back.......................... 14" Overhung........................... 6" Max. Roll ...

GFM #SX-13 ROTARY FORGING MACHINE

• Manufacturer: GFM, AUSTRIA

GFM #SX-13 ROTARY FORGING MACHINE MANUFACTURER: GFM, AUSTRIA TYPE: SX-13 YEAR: 1979 NO. OF HAMMERS: 4 FORCE PER HAMMER 1.600 KN (160 MT) NUMBER OF STROKES PER MINUTE: APPROX. 620 LENGTH OF THE HAMMER: 270...

MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS

• Manufacturer: Marshall

Diameter of Forging Dies 6" Width of Roll Dies 6" Press set up to receive flat back segmental dies Equipped with: Roll Shaft Extensions for operation Die Mounting of Overhanging Rolls Air Clutch Brake Hand T...

CLANSMAN DYNAMIC MODEL#C2100 FORGING RAIL-BOND MANIPULATOR

CLANSMAN DYNAMIC MODEL#C2100 FORGING RAIL BOUND MANIPULATOR 1500kg Lifting Capacity; 1800mm Vertical Arm Length; 2600mm Horizontal Arm Length Speeds = 60 deg/s Slew, 1.0m/s Vertical, 0.8m/s Horizontal, 1.0...