Used Forging in New York, USA

2014 Clansman Dynamic Model C2100 Rail-Bound Forging Manipulator

• Manufacturer: Clansman

Features: 6 Axes of Movement 270 Degree Cab Rotation Equipped With: 6 Axes of Movement 270 Degree Cab Rotation 400L Hydraulic Tank 460VAC,3PH, 60Hz, 100A Power requirements NOTE: Purchased New in 2014, Used for 2...

4" National Upset Forging Machine - Re:24376

• Manufacturer: National

Equipped with Air Clutch & Brake The machine is available for inspection at our Cleveland, Ohio warehouse on request.

6" National Automated Forging Cell Re:24889

• Manufacturer: National

Available for immediate inspection and delivery Very good working condition Still installed and under power for inspection

National #2 Forge Reduceroll Re:24617

• Manufacturer: National

This machine is available for viewing in Cleveland, Ohio.

40,000 kg Schloemann (Beche) CounterBlow Forging

• Manufacturer: Schloemann (Beche) DGH 40

Size: 40,000 kgs | Stroke: 1,250 mm | Ram l-r: 3,200 mm | Ram f-b: 3,000 mm | Bpm: 80 | Anvil l-r: 3,000 mm | Anvil f-b: 4,800 mm | Between the guides: 1,200 mm | Total hammer weight: 235,000 kgs | Floor space l...

9" National High-Duty Heavy Upset Forging Machine (Upsetter) - has never been cracked, Re:24440

• Manufacturer: National

Location: Our Cleveland, Ohio Rebuild Facility - in storage and available for inspection. Very good working condition

8,000 lb Erie Drop Forging Hammer, Re:25971

• Manufacturer: Erie Press Systems

Dismantled and moved to storage Very good working condition

1,250 kg Lasco model KH-125 Forging

• Manufacturer: Lasco

Additional Info: Weight of falling ram: 1250kg Way between the slides: 500mm Motor power: 22kW Weight of anvil: 19 tons Total weight: 31.5 tons Height above floor: 5000mm Total Height: 5700mm

3" National #6 Reducer Rolls (Forging Rolls) Re:25831

Complete with: Flywheel safety guard Incorporated control panel Centralized grease lube system Air Clutch and Brake Herion pneumatic clutch & brake safe valve Available for immediate inspection and delivery Excep...

6,200 kg Nittan Air Forging Hammer, Model ADH-60-I,

• Manufacturer: Nittan

Additional information: Standard dropping section weight (upper mold not included) (kg): 6200 Standard upper section weight(Nominal value) (kg): 1800 Stroke（ｍｍ）: 1300 Cylinder diameter: 580 mm Piston diameter: 21...

2-1/4" National #4 Reducer Roll (Forging Rolls) Re:25345

Dismantled and moved to storage Available for immediate inspection and delivery

1980 25 to 75mm dia HELIPEBS H65 Roll Forged Steel Grinding

Additional info: The walking beam furnance has the capacity to heat bars to 6 meters in length, making the use of material more efficient, and the line has a band saw, in case the process requires bars of shorter...

1992 2" Hatebur AMP 50 4-Die Hot Former, 800 Forge tons,

Dia: 50 mm | Tons: 800 tonnes | Builder: Hatebur | Part dia: 92 mm | Max cutoff length: 110 mm | Part wt: 2 kgs | Min initial part weight: kgs | Min cutoff length: 32 mm | Max outer dia for combination parts: 82...

1-1/8" Hasenclever WSHK-100 w/Ajax pwr spl, 80kW Toccotron

• Manufacturer: Hasenclever

Specs: 100 tons of Upsetting Force 125 tons of Gripping Force Total stroke of header slide: 180mm Effective Upsetting stroke: 112mm Stroke of top gripping jaw: 85mm Dimension of gripping jaws: height of one jaw: ...

1,000 ton Etchells model MF40/1000 S.P.H. Vertical

• Manufacturer: Etchells

Additional info: • Four (4) Tie-Rod Construction • Horizontally opposed griping dies • Multi-Directional adjustment by wedges • Flat-Base Construction • Overload protection • Adjustable front stock gauging device...