Used machinery

HW 26

15 HP, 12-speed main motor. 4.5″ (115 mm) spindle pitch. Hardened and ground spindles, guides and gears. One-piece solid cast base and ground guideways for rigidity. Full length pedal brake. Button to engage gear...

ML 2060T

7.5 HP main motor, 12-speed. 3.125″ spindle pitch. Solid bed over the entire casting length with front tray for fast chip removal. Adjustable clutches for overloaded feeds. Quick reverse lever on apron. Full-leng...

KLS 1760II

Engine power 6 HP. Gear box (12) speeds. Hardened and ground guides. Centralized lubrication system in the headstock. Cast iron base and bed. Tray for quick chip cleaning. Pedal brake. Inch and millimetre dials. ...

CHL 21 SERIES

Fanuc Servo motor 15 HP Peak. Meehanite cast iron with hardened and extra ground guides. Semi-automatic gearbox with hardened and ground gears. High precision oversized recirculating ball screws. 40-4000 RPM spin...

CNL 1740

Fanuc Servo motor 10 HP Peak. CNC & MANUAL conversational control. Meehanite cast iron with hardened and extra ground guideways. Semi-automatic 2-speed gearbox with hardened and ground gears. High precision overs...

CSM 1440 CNC

Fagor Servo motor 7.5 HP Peak. CNC & MANUAL conversational control. Meehanite casting with hardened and extra ground guideways. Automatic gearbox with hardened and ground gears. High precision oversized recircula...

SIEMENS DRIVE MODULE 6SN1118-0DM11-0AA1

• Manufacturer: Fanuc

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY

SIEMENS MODULE BOARD 6SN1118-0DG21-0AA1 WARRANTY EACH 1

• Manufacturer: Fanuc

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY

HARDINGE CONQUEST 51 CS-51 CNC LATHE SET OF SENSORS SWITCH VALVE SET

• Manufacturer: Fanuc

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART CAME FROM A HARDINGE CONQUEST 51 CS-51 CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED.

STAR MAF 42 AC-42 CNC LATHE 5'' INCH HARDINGE 22C COLLET CHUCK NOSE

• Manufacturer: Fanuc

THIS PART CAME FROM A STAR AC-42 MAF 42 CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED.

MATSUURA MC-800VF CNC MILL POWER SUPPLY P-886044 SPS-002 EYG300/55G

• Manufacturer: Fanuc

THIS PART CAME FROM A MATSUURA MC-800VF THAT WE DISMANTLED.

NACHI VARIABLE VANE PUMP VDR-1A-1A2-S22 MFG 4X0 NP4 OKUMA LB25 CNC LATHE TESTED

• Manufacturer: Fanuc

THIS PART CAME FROM A FULLY FUNCTIONAL 1996 OKUMA LB25 CNC LATHE WITH OSP5020 CONTROL THAT WE DISMANTLED.

FANUC A16B-1100-0330/ SERVO 3 AXIS BOARD

• Manufacturer: Fanuc

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY

SIEMENS 6SN1123-1AA00-0DA1 WARRANTY EACH 1

• Manufacturer: Fanuc

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...