Used rollers in Sweden

Roundo round roller PASS 310

• Manufacturer: Roundo

– Cone bending – Hardened and ground rolls – Replaceable top roll 220mm – Roundo PSR/wCNC with cnc control in all rolls – Interpolation

Scantool round roller EBR 1050 x 3.0

• Manufacturer: Scantool

• Cast iron main frame • Main motor with brake • Rotatable top roller • Motorized centralized rollers • Conical bending, pre-bending available • Cable-drawn tracks • Mobile control panel • Built according to EU s...

Snap lock roofing roll forming machine Sweden

The Snap Lock Roofing Roll Forming Machine is a specialized machine designed for the efficient production of snap lock roofing panels. These panels are known for their seamless interlocking system, eliminating th...

SWEBEND PROFILE BENDING MACHINE SB3B-65

– Digital display of rollers – Standard rollers – Hardened steel rollers outer diameter 42.4 and 33.7mm – Nylon rollers outer diameter 42.4 and 33.7mm

SWEBEND PROFILE BENDING MACHINE SB3B-65 WITH ELECTRIC VALVE

Pyramid design allows pre-bending from both sides Combined vertical/horizontal design Drive on all 3 axes via brake motor and planetary gear. Slip clutch for automatic compensation of speed difference between upp...

SWEBEND PROFILE BENDING MACHINE SB3B-75 WITH ELECTRICAL VALVE

Pyramid design allows pre-bending from both sides Combined vertical/horizontal design Drive on all 3 axes via brake motor and planetary gear. Slip clutch for automatic compensation of speed difference between upp...

Roof panel roll forming machine Sweden

A roof panel roll forming machine is an industrial-grade equipment designed to manufacture roofing panels efficiently and accurately. These machines convert coiled sheet metal into high-quality roof panels with c...

ROUNDO R-4-S

• Manufacturer: Roundo
• Model: R4

New ROUNDO R-4-S – Axle diameter 105 mm – Max cap 30-40 cm3

ROUNDO profile rounding machine R-4

• Manufacturer: Roundo
• Model: R4

Used ROUNDO profile rounding machine R-4 Production no: 75402 | Capacity flat iron high edge: 100×18mm | Capacity flat iron low edge: 200×30mm | Capacity angle iron (cap.angleiro): 70×7, 90×9mm | Capacity t-iron:...

Pipe bending machine UNI 42

Pipe bending machine UNI 42 –A1DE, year of manufacture 2015 Electric bending machine with display. It has 9 tick programs and the possibility of 9 individual ticks in each program. Perform precise bending in pipe...

SWEBEND SB3B-75

• Manufacturer: SWEBEND

New SWEBEND SB3B-75 Production no: M0283 | Capacity flat iron high edge: 80 x 15 mm | Capacity flat iron low edge: 150 x 25 mm | Capacity angle iron (cap.angleiro): 75 x 75 x 8 mm | Capacity t-iron: 75 x 75 x 8 m...