New Roll Formers in Texas, USA

TIN KNOCKER TK 20 BUTTONLOCK ROLL FORMING MACHINE

• Manufacturer: Tin Knocker
• Model: TK20

TK 20 Button lock Specifications: Capacity: 20-26 Gauge Motor: 3 HP, 230/3/60 (Available also in 230/1/60 option)Lube: Centralized Speed: Approx. 60 FPM Dimensions: 60" x 30" x 42"Weight: 820 lbs.

TIN KNOCKER TK 16 GA PITTS PITTSBURGH ROLL FORMING MACHINE

• Manufacturer: Tin Knocker
• Model: TK16GA

Tk 16 Ga Pittsburgh Specifications: Capacity: 16-20 Ga. Uses Approx. 1-3/8” of material Motor: 3HP,Electrics: 230/3/60, (1PH Optional)Depth of Pocket/Size: ½” width of hammer-over edge adjustable up to 3/8Sp...

TIN KNOCKER TK 24 GA PITTS PITTSBURGH ROLL FORMING MACHINE WITH STAND AND OPTIONAL FLANGER

• Manufacturer: Tin Knocker
• Model: TK24GA

TK 24 Ga Pittsburgh Specifications: Electrics: 115 Volt, Single Phase, 60 Hz - Standard (230V/1/50 available)Depth of Pocket: Approx. 5/16" with hammer edge of 3/8"Speed: Approx. 35 FPM Flange Height: 3/16"Dimens...

TIN KNOCKER TK 20 GA PITTS PITTSBURGH ROLL FORMING MACHINE (WITH CHOICE OF DRIVE CLEAT OR ACME ROLLS)

• Manufacturer: Acme

TK 20 Ga Pittsburgh Specifications: Dimensions: 40"L x 24"W x 44"HCapacity: 20-26 Gauge Mild Steel Motor: 1 HP, 1800 RPM Electrics: 115/230 Volt Depth of Pocket: 5/16"Speed: Approx. 25 FPM

TIN KNOCKER TK T-D-P TDC ROLL FORMER MACHINE

• Manufacturer: Tin Knocker

Speed:50 FPMT-D-P TDC Clip (Min. Length 20"):22 Ga. Speed: 2 1/8"Forming Sections: 14Shaft Diameter: 1.25"Pass line: 38.625"Forming Speed: 50 FPM Motor: 10 HP, 1800 RPM Electrics: 230/460V/3PHWeight: 3450 lbs Dim...

ROLLFORMER VS-150 ROOF PANEL MACHINE

• Manufacturer: Roll Former Corp

120V AC Hydraulic drive and shear Adjustable width - 9' - 24' panels Digital controller - optional Form 22g - 26g steel Form .032' aluminum Form 12-20 oz copper

DUCTFORMER 14 STATION TDFC ROLLFORMER

• Manufacturer: Ductformer
• Model: TDFC

Features: 14 forming stations 24” infeed table heavy duty construction hardened tool steel infeed guides all gear drive self-adjusting full gauge range oil bath gear reducer (standard) heavy duty spindle shafts a...

ROLLFORMER "STAND ALONE" PERFORATION MACHINE

• Manufacturer: Roll Former Corp

120V single phase 110V Electric-GB drive Perforates up to 24" wide material Handle 26-24ga. steel Handle .032" aluminum Handle 12-20 oz. copper Complete w/ (2) adjustable perforation dies

LIBERTY DOUBLE STANDING SEAM ROOF PANEL ROLLFORMING MACHINE SS4E-15

• Manufacturer: StanGroup

New double standing seam roof panel Rollforming machine ss4e-15

TIN KNOCKER FOURPLEX

• Manufacturer: Tin Knocker

DUCTFORMER CR10-SS ROLLFORMER

• Manufacturer: Ductformer
• Model: CR10SS

The standing s profile is similar to a standard s-slip or flat s section but incorporates a 1 1/4 “ tall vertical leg that provides additional strength and rigidity to the ductwork. Specifications: 20-26 gauge c...

TIN KNOCKER TK FOURPLEX S AND DRIVE ROLL FORMING MACHINE W/ SLITTER ATTACHMENT

• Manufacturer: Tin Knocker
• Model: TK-S

TK Fourplex Specifications: Capacity: See features Motor: 5 HP (1800 RPM) 230 Volt, 3 Phase, 60 Hz "S"Cleat Width: 1 1/16"Drive Cleat Width: 1 1/18"Approx. Speed: 100 FPM Dimensions: 74" W x 30" L x 50" H Approx....

Metal siding roll forming machine in Kharkov, Ukraine