Used compacting

Small screw conveyro, 920 mm, Ø 145 mm

External dimensions: length 2120mm, width 435mm, height 270mm Motor: 0,5 kW, 220/380 V, brand BAUER, 690 rpm, outlet: 19 rpm Second entrance possible

2 lifting bails for small casting ladles, ± 60 kg

Ø hole for ladles 350 mm, ladles ± 60 kg Ø ± 370/280 mm, height 390 mm Tiltable by hand Without chain hoist With 1 control for hoist

Small bunker with 2 compartments 2 x 2,7 m³

1st screw CEM type MEUB90S4, 1,1 Kw, 220/380 V, 1410 rpm 2nd motor for screw CEM type MEUB90L8, 0,55 Kw, 220/380 V Driven by belt with one screw for each compartment Ø input 30mm (2x) Ø output 1x 200mm

Small core sand mixer V&S Mischka 0 GF

• Manufacturer: Vogel & Schemann

Brand Vogel & Schemann Dimensions: length: 600mm, width: 600mm, height: 900mm; Useful dimensions: depth: 240mm; Ø390mm

Clausing CAST IRON w/PRECISION GROUND TOP

• Manufacturer: Clausing

CAST IRON WORK TABLE FOR CLAUSING DRILL PRESS WORK SURFACE - 20" x 30" COOLANT TROUGH IS AN ADDITIONAL 2.5" ALL AROUND TOTAL SIZE IS 25" x 35" OVERALL COMES WITH HARDWARE FOR MOUNTING IT TO A BOX TABLE (IT WAS US...

2010 Pneumatic conveyor 30l HENSEL with small hopper

• Manufacturer: HENSEL

Dimensions: Length: 350mm; Width: 350mm, Height: 1500mm With small hopper and butterfly valve With CE mark on the conveyor

2008 Sand laboratory sand compactability tester SIMPSON Hartley 2552

• Manufacturer: Simpson

Dimensions appliance: 1200 x 800 x height: ±600mm Cabinet dimensions: Length: 1200mm; Width: 400mm; Height: 2000mm Suitable for batch mixers Compactability measurements

Small vibrating dose conveyor ± 2300 mm x 200 mm

• Manufacturer: Simex

Motor SINEX, serial number 28463A3, 220/380 V Magnet vibrator

Small vibrating dosing channel, ± 2300 mm x 200 mm

• Manufacturer: Simex

Magnet vibrator with liner Weight: ± 300 kg | Outside dimensions: 2600 mm x 630 mm x 650 mm | Useful dimensions: ± 2300 mm x 200 mm x 60 mm | Motor sinex, serial number: 28463A3, 220/380  V

DEVLIEG CAST IRON

• Manufacturer: DeVlieg

T-SLOTTED ROLLER CART INSPECT IN OUR NEW JERSEY WAREHOUSE

Small wood saw, in gradual angle 2 x 45°

• Manufacturer: Omga

With vice, table, disc Ø 240 mm Weight: ± 40 kg | Outside dimensions: 700 mm x 550 mm, h. 450mm | Inside dimensions: 580 mm x 160 mm | Motor omga, serial number: 37687, 1,3 hp, 220/380 V

Ground compactor, Ø 1050 mm

1 compacting vibrating plat for bottoms lining of furnaces and bigger ladles Vibrating motor BOSCH, type 04008, 2850 rpm, 800 W, 220/380 V

Roller curve 600 mm, 90°

Double range roller curves 90° For heavy rollers axles Ø 35mm

Roller curves 90°, 600 mm

Roller curves with 2 ranges rollers Ø 89 mm, width 290 mm Axles Ø 19 mm is flattened to 14 mm