Used Saws in Illinois, USA

2020 SAWTEQ S-200 Panel Dividing Saw ()

Chopping edge on the right-angled fence Ready for simple stock control connection Control software CADmatic 5 – Intuitively understandable – Full HD widescreen multi-touch monitor – Harmonized user interface powe...

15" X 18" Wells Horizontal Twin Post Band Saw

15" x 18" Wells #14, 15" rounds, automatic shuttle bar feed, #29217 15" X 18" WELLS HORIZONTAL TWIN POST BAND SAW Model no. 14 with automatic shuttle type bar feed 15" round Weight approx. 7000 lbs. (total) Overa...

HEM Model 1200A Horizontal Band Saw

Imperial Metric HEM Model 1200A Horizontal Band Saw

1995 15.7" X 12.2" Behringer Model HBP310/403GA Horizontal Band Saw ()

• Manufacturer: Behringer

Imperial Metric Behringer Model HBP310/403GA Horizontal Band Saw Equipped With Fully Programmable Control

2022 Behringer HBE411A Dynamic Automatic Horizontal Band Saw ()

• Manufacturer: Behringer

Imperial Metric Behringer HBE411A Dynamic Automatic Horizontal Band Saw (2022) Cast iron band guiding parts are made by Behringer and provide vibration damping directly at the cutting edge, thus increasing tool l...

1989 Amada HK-800 Horizontal band saw

• Manufacturer: Amada
• Model: HK-800

Country: United States

2004 Marvel/Spartan Circular cols saw for steel

• Manufacturer: Marvel

Marvel Spartan 315 Circular Saw Spartan, Marvel, Cold saw, Slow speed, Circular saw, Ferrous saw, Chop saw Blade Guard, Ratchet down feed handle with integral switch, Mitering left or right, Blade, 2 speed motor,...

LESTHER JIH-20 COLD SAW

Imperial Metric Country: United States | Cutting angle: 45 - 0 - 45 DEGREE | Sawblade size: 20" X 1" BORE | Saw speed: 3,000 RPM | Motor: 7.5 HP | Worktable area: 36" X 25.5" | Worktable height from floor: 34.4" ...

2025 Indotech CNC 18 DC Smart saw 18" dual Column CNC bandsaw Like Amada, Behringer, Doall, Hyd-Mech, Kasto

• Manufacturer: Amada

Indotech model CNC DC18 Smart saw, horizontal dual Column CNC bandsaw, Auto feed and speed files with ballscrew and servo head feed, Auto Lube, variable vise Pressure, 10" HMI Touch screen, Bundling clamps, Rota...

1992 Trennjaeger TS-3 Automatic Traversing Cold Saw ()

• Manufacturer: Trennjaeger

Trennjaeger TS-3 Automatic Traversing Cold Saw (1992) Work piece width 39.7" Workpiece height 11.81 Total power requirement 25 HP Motor power, 8 HP The industrial saw in the H-beam design from Trennjaeger has a ...

2009 DoAll Diamond Band Saw 2018-DW60 #50351

• Manufacturer: DoAll
• Model: 2018-DW60

New – 2009 Serial No. 584-09104 The DoAll 2018-DW60 vertical diamond band saw is designed for cutting silicon, quartz, glass, and other brittle and/or friable materials. SPECIFICATIONS: Capacities at 90 Degrees: ...

1986 Hendrick SZ III-EFZ Panel Saw

• Manufacturer: Hendrick

HP 7.5 RPM 1750 Voltage 220 3 Phrase Blade size 13 1/2 Arbor size 1" Blade Travel 67" Cutting Area 11' x 67"

18" x 22" DOALL TM-1822 Vertical Saw

• Manufacturer: DoAll
• Model: TM-1822

DOALL VERTICAL MODEL TM-1822 Throat: 18" | Work height: 22" | Power: 5hp | Blade width: 1.25" | Blade length: 196" | Weight approx. (lbs.): 2,800 lbs | Electrics: 480V/3PH/60H

1998 VERMEER LRC21 Rock Saw

• Manufacturer: Vermeer

Removed from a Vermeer LM42, this unit will replace the vibratory plow.