Used Grain Processing in California, USA

Mill, Stone, S/st, 25 HP, 2" Inlet, 13-1/2" x 3" #S740286

Stainless Steel Stone Mill - 13.5" diameter x 3" deep chamber, powered by a 25 HP, 440-volt motor. Features a 2" inlet and a 7.5" x 1.5" discharge. Previously used in a food processing facility.

Mill, Impact, Entoleter, C/st, 5 HP, Mdl ECM, 16" Dia, #S744506

• Manufacturer: Entoleter
• Model: ECM

Entoleter Centrimil Impact Mill, Model ECM, carbon steel construction. Includes 16" diameter rotor with 3/8" diameter pins and 2-part rotating disc. Includes 8" X 3-1/2" top infeed and 6" diameter center bottom d...

Hopper, 6 CF, S/st, 24" x 25", On Stand #S739754

Stainless steel cone hopper, 24" diameter x 25" high with 1-1/2" outlet. Offers a 6 cubic foot capacity. Mounted on a sturdy stand for stability.

Hopper, 20 CF, Stainless Steel, 39" x 22", 60 Degree Cone, Carbon Steel Frame #S738421

Stainless Steel Hopper, 20 Cubic Feet - Measures 39” diameter x 22” straight side with a 60-degree cone bottom. Includes a 9” manual discharge valve and is mounted on a carbon steel frame.

Mill, Quadro, Comil, 196-S, S/st, 15 HP, #S496300

• Manufacturer: Quadro
• Model: 196S

Quadro CoMil model 196S, with 15 HP XP direct drive main motor, 220/440V, 900 RPM. Designed to grind between 10,000 and 30,000 lbs/hr with reduced fines generation. All 316 stainless steel contact parts. Previous...

Mill, Fitz, Homoloid, S/st, 2 HP, Mdl JT, Less Face Plate #S472036

• Manufacturer: Fitzpatrick
• Model: JT

Stainless steel mill, fitz, homoloid, stainless steel, 2 hp, mdl jt, less face plate. FitzMill, Homoloid, stainless steel, model JT. Unit has feed opening of 2" x 6", discharge is 8". Unit has Baldor 3 HP 208-230...

Hopper, Feed, S/st, 8-1/2" To 3", On Frame #S734262

Stainless steel feed hopper, 27" diameter x 30" deep with a 2" straight side and 28" cone. Features an 8-1/2" top opening and 3" outlet on a mobile frame.

Mill, Rietz, Fluffer, RF-18-K, S/st, Less Drive #S467905

• Manufacturer: Rietz

Rietz Fluffer Mill, Model RF-18-K - Stainless steel fluffer mill with a feed diameter of 10". Stand-mounted with no drive. Requires approximately 20 HP and operates similar to an industrial garbage disposal.

Hopper, S/st, Starch, Small #C737812

Stainless Steel Starch Hopper, Small Size. Designed for precise handling of starch or similar materials, features an estimated 5 cubic feet capacity.