Used Electrical Test Instruments in Dublin, Ireland

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Solar 7399-3

Details The Solar 7399-3 Transient Generator delivers precise surge and transient waveforms for EMC compliance testing. Engineered to evaluate electronic equipment immunity against voltage spikes, it ensures cons...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

emtest VDS200N

• Manufacturer: emtest

Details emtest VDS200N (contact Axiom for availability) The emtest VDS200N Voltage Drop Simulator is used to simulate the various battery supply waveforms recommended by international standards and by car manufac...

Haefely PIM120

• Manufacturer: Haefely

Details The Haefely PIM120 is a precision impulse current generator designed for component and material testing. It delivers controlled, high-current pulses that ensure durability verification and compliance with...

emtest HFK

• Manufacturer: emtest

Details emtest HFK Capacitive Coupling Clamp The emtest HFK is used to couple EFT/burst pulses to I/O lines as required in diffe European and international standards for immunity testing. The coupling of the Elec...

emtest CCI

• Manufacturer: emtest

Details emtest CCI Capacitive Coupling Clamp The emtest CCI is used to couple EFT/burst pulses to I/O lines as required in diffe European and international standards for immunity testing. The coupling of the Elec...

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Teseq (Schaffner) NSG437

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG437 ESD simulator delivers precise air and contact discharge testing up to 30 kV, ensuring compliance with IEC/EN 61000-4-2, ISO 10605, and other standards. Featuring a touch panel ...

Schaffner NSG3025

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG3025 Burst Generator offers a pulse amplitude range from 200V to 4.8kV ±10% (open circuit), with burst frequency adjustable between 0.1kHz and 1MHz ±2%. It supports 1 to 255 spikes per pa...

Schaffner NSG222A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG222A Pulse Interference Simulator delivers precision testing with 5ns/100ns pulse forms, featuring a built-in coupling network for symmetrical and asymmetrical pulse injection on mains co...

Rohde & Schwarz ESPI3

• Manufacturer: Rohde & Schwarz
• Model: ESPI

Details The Rohde & Schwarz ESPI3 is a 9kHz to 3GHz precompliance test receiver designed for EMI diagnostics across CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, and VDE standards. It features five selectable detectors ...

Schaffner NSG 224A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-224A is a modular disturbance simulator mainframe engineered for the NSG-200 series, delivering core functionality such as power handling, line filtering, overload protection, and phase ...