Used Engine Lathes in Minnesota, USA

AML 618 Engine Lathe

• Manufacturer: AML

Here is a very nice running AML 618 lathe. This lathe can be inspected under power in our facility in Minneapolis MN. If you would like to set up an inspection, please contact us. Note this Lathe is a copy of th...

Sidney 32 Engine Lathe - 24" x 76"

Model 32, S# 9784, 24" Swing, 76" Between centers, 12" 3 jaw chuck w/ reversible jaws, X/Y DRO, 32 spindle speeds from 15 to 1,000 rpm, Taper attachment, Flip down safety shield over chuck, Heavy duty tailstock, ...

KENT USA MLX-1740T

• Manufacturer: Kent USA

KENT USA (NEW) MODEL MLX-1740T ENGINE LATHE CAPACITY - 17" SWING OVER BED - 10.875" SWING OVER CROSS SLIDE - 24.5" SWING OVER GAP - 8" GAP LENGTH (W/ FACE PLATE) - 12" BED WIDTH - 44" BETWEEN CENTERS HEADSTOCK - ...

KENT USA HW-26160

• Manufacturer: Kent USA

KENT USA (NEW) MODEL HW-26160 ENGINE LATHE CAPACITY - 26" SWING OVER BED - 17.3" SWING OVER CROSS SLIDE - 35" SWING OVER GAP - 11.8" GAP LENGTH WITH FACE PLATE - 15.75" BED WIDTH - 169" BETWEEN CENTERS HEADSTOCK ...

ACRA 1640TE

• Manufacturer: Acra
• Model: 1640TE

ACRA (NEW) MODEL 1640TE PRECISION ENGINE LATHE CAPACITY - 8" CENTER HEIGHT - 16-1/8" SWING OVER BED - 22-7/8" SWING IN GAP - 10-3/8" SWING OVER CROSS SIDE - 40" BETWEEN CENTERS - 10-3/16" BED WIDTH - 5-2/8" GAP I...

KENT USA HW-2680

• Manufacturer: Kent USA

KENT USA (NEW) MODEL HW-2680 ENGINE LATHE CAPACITY - 26" SWING OVER BED - 17.3" SWING OVER CROSS SLIDE - 35" SWING OVER GAP - 11.8" GAP LENGTH WITH FACE PLATE - 15.75" BED WIDTH - 80" BETWEEN CENTERS HEADSTOCK - ...

ACRA 2140TE-3

• Manufacturer: Acra
• Model: 2140TE

ACRA (NEW) MODEL 2140TE-3 PRECISION ENGINE LATHE CAPACITY - 21" SWING OVER BED - 15-1/4" SWING OVER CROSS SIDE - 28-3/4" SWING IN GAP - 40" BETWEEN CENTERS - 10-5/8" CENTER HEIGHT - 12-1/2" BED WIDTH HEADSTOCK - ...

ACRA 1440C

• Manufacturer: Acra
• Model: 1440C

ACRA (NEW) MODEL 1440C ENGINE LATHE 14" SWING OVER BED 8-5/8" SWING OVER CROSS SIDE 40" BETWEEN CENTERS 20" SWING IN GAP 1-1/2" SPINDLE BORE D1-4 SPINDLE NOSE 8 SPINDLE SPEEDS 80 - 2000 RPM 5 HP, 230/460 VOLTS, 3...

SUMMIT 30-5-80

• Manufacturer: Summit

SUMMIT (NEW) 30-5-80 PRECISION ENGINE LATHE 29.9" SWING OVER BED 20.5" SWING OVER CROSS SLIDE 39.4" SWING OVER GAP 15" GAP 8-3/8" GAP IN FRONT OF FACEPLATE WORK PIECE WEIGHTS - 550 LBS AT HEADSTOCK - 4,400 LBS BE...

SUMMIT 30-5-120

• Manufacturer: Summit

SUMMIT (NEW) 30-5-120 PRECISION ENGINE LATHE 29.9" SWING OVER BED 20.5" SWING OVER CROSS SLIDE 37" SWING OVER GAP 15" GAP 8-3/8" GAP IN FRONT OF FACEPLATE WORK PIECE WEIGHTS - 1,700 LBS AT HEADSTOCK - 11,000 LBS ...

ACRA ATEL 1767ACH

• Manufacturer: Acra
• Model: 1767ACH

ACRA (NEW) MODEL ATEL 1767ACH ENGINE LATHE 17" SWING OVER BED 24" SWING OVER GAP 10.55" SWING OVER CARRIAGE 6" GAP WIDTH 12" BED WIDTH 7.5 HP SPINDLE MOTOR 1/8 HP COOLANT MOTOR 230/460 VOLTS, 3 PHASE SPINDLE - 67...

ACRA 2180C

• Manufacturer: Acra
• Model: 2180C

ACRA (NEW) MODEL 2180C PRECISION ENGINE LATHE WITH CLUTCH CAPACITY - 21" SWING OVER BED - 14" SWING OVER CROSS SIDE - 30" SWING IN GAP - 80" BETWEEN CENTERS - 13-1/2" BED WIDTH HEADSTOCK - D1-8 SPINDLE NOSE - 3-1...