Used Processing in New Jersey, USA

Pump-Vacuum - IPP# 208379

• Manufacturer: Wiegand

Steam injection 4 effects with ceramic pistons and VICARB Carbon Block Heat Exchanger, Serial Number 1296, rated -1/3 bar @ 150 degrees C Service Side, volume 16 liter; -1/3 bar @ 150 degrees C process side, volu...

Cytiva 6098 Column - IPP# 239339

• Manufacturer: Cytiva

2000 Liter/Hr., 316 SS, polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE- ATKA system # 6098 6 inlets, 4 outlets, two column connection, five head diagram pumps. Rated for 6 b...

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: GEA

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...

Packed Column - IPP# 222790

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Packed Column - IPP# 222789

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Centrifuge-Disc Bowl 2.2 kW (3 HP) - IPP# 94979

• Manufacturer: Westfalia

Designed for 5 gpm coolant flow rate, 7 gpm for oil. Batch system includes (1) 250 gal dirty coolant tank; (1) 250 gal clean coolant tank; (1) 250 gal dirty oil tank. Clean oil designed to discharge to barrels. S...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...

IPP# 601610, Methanol Plant-275 TPD (82,500 TPY) Petrochemical

Current Capacity: 82,500 TPY Product Quality: Methanol A Technology: Process uses natural gas as feedstock with added of carbon dioxide in the reforming furnace

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221211

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac Motor

- IPP# 211968

• Manufacturer: Airoil-Flaregas

Airoil-Flaregas F.C.10 flare tip, Pilots Derrick supported Flare stack, Customer ref #62/3336085/2H1/ON, The FC.10 flare tip inclusive of the Flarex molecular seal, Derrick supported flare stack and Knock out dru...

Sterilizer - IPP# 207687

Designed for pass thru loading and unloading, with quick open doors front and back. Original Installation to a clean room 316 SS lined chamber Modified and re-rated in 1993 by Industrial Fabricating and Engineeri...

Tubular Reactor Stainless Steel 316 - IPP# 232538

• Manufacturer: Snowtech Hydro Cracker & Fisher Tropsch

Pilot plant, including an Agilent Tech Model 7890A-GC. Designed to operate at up to 725 psig and 572 degrees F in the auxiliary process vessels and 932 degrees F in the reactor tubing. The current set up includes...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221216

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact, and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by a...

Major Items Plastic Stainless Steel 316 - IPP# 205765

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...