Used Processing in New Jersey, USA

Mixer-Twin Shell & Double Cone 0.001 m3 (0.03 ft3) Stainless Steel 304 - IPP# 210349

• Manufacturer: Patterson Kelly

motor with chain and sproket drive. Unit enclosed in a plastic housing

Mixer Twin Shell & Double Cone Patterson Kelly Stainless Steel 321 - IPP# 216376

• Manufacturer: Kelly

twin shell blender system maximum density of 50 lbs./cu.ft Shell diameter is 54" (est.), manway diameter is 17 3/4" with air operated butterfly valve Brake supplied with motor Electrical requirements are 230/460,...

Stainless Steel 304 Werner & Pfleiderer Simplex Mixer-Ribbon & Paddle - IPP# 78681

• Manufacturer: WP

jkt ribbon blender. Total capacity 2600 liter. Jkt rated 8 bar. 1470 rpm motor (no motor) 240 rpm input, 36 rpm output. Shaft 6" (150mm) dia. Openings: top 34" long x 16" wide, 1-9"; jkt 2-1", 4-1/2"; center btm ...

Mixer-Ribbon & Paddle 12.7 m3 (450 ft3) Stainless Steel 304 - IPP# 6046

• Manufacturer: Patterson Kelly

cylindrical slurry blender, Has single shaft agit w/approx (12) paddle arms. Sprocket for chain drive, takes 25 HP. Openings: top 2-12", 2-10", 2-2"; heads 2-20"; 1-6" and 1-2" outlet.

Mixer-Ribbon & Paddle 1.13 m3 (40 ft3) Stainless Steel 321 - IPP# 232600

• Manufacturer: Will-Flow

jacketed Paddle Blender Rated for 50 psi at 300 degrees F 300 gallon liquid capacity. Scraped surface paddles.

Mixer-Ribbon & Paddle 0.6 m3 (21.2 ft3) Carbon Steel - IPP# 706703

end bottom discharge with pneumatic operated slide valve, 2-650mm x 650mm inspection ports with hinged covers.

Mixer-Ribbon & Paddle 0.05 m3 (1.77 ft3) Stainless Steel - IPP# 706112

• Manufacturer: Winkworth

Blender type: Ribbon blender via gearbox hinged top cover

Mixer-Ribbon & Paddle 0.6 m3 (21.2 ft3) Carbon Steel - IPP# 706702

end bottom discharge with pneumatic operated slide valve, 2-650mm x 650mm inspection ports with hinged covers.

Stainless Steel Alpine (Hosokawa) HMC-60 Mixer-Ribbon & Paddle - IPP# 706110

• Manufacturer: Alpine

ribbon speed 158 rpm (max) 3/50/380/415 volt trough 1.2m long x 300mm wide x 350mm deep hinged top cover

Stainless Steel Alpine (Hosokawa) HMC-60 Mixer-Ribbon & Paddle - IPP# 706111

• Manufacturer: Alpine

Type: Ribbon blender ribbon speed 158 rpm (max) 3/50/380/415 volt hinged top cover,

Mixer-Ribbon & Paddle 1.13 m3 (40 ft3) Stainless Steel 304 - IPP# 210856

• Manufacturer: Sprout Waldron

horizontal, twin paddle mixer SO # C-l6001 with 10 Gauge covers and flat top with 3 "V" belt sheeves through a Dodge single reduction torque arm. Torque arm # T-17 Capable of continuosly handling 48,000 lbs/hr.

Stainless Steel 316 M.A.P SRL (Italy) WBHY 6000 Mixer-Ribbon & Paddle - IPP# 207399

• Manufacturer: M.A.P SRL (Italy)

ploughshare mixer with (4) side choppers Job 167 Chamber is 1.5m I.D x 3370mm long packed glands on shaft shaft speed 74 rpm 2-speed motor chopper direct driven by a 2-speed motor, 5.5 kw, 3/50/220/240/380/420 vo...

Stainless Steel 321 Loedige Littleford Ploughshare FKM 3000.D.4MZ.4ZF.4L Mixer-Ribbon & Paddle - IPP# 208450

• Manufacturer: Littleford

jacketed Loedige ploughshare mixer with choppers machine #7644 behalter #1952 jacket pressure 0.5 bar @ 110 deg C (180ltr) chamber 1110mm diameter x 2960mm straight side, internal rotor with (10) plow blades and ...

Mixer-Nauta 15,000 L (3,963 gallons) Stainless Steel 304 - IPP# 94526

• Manufacturer: Nauta

1440 rpm motor, Type SP70-LM70, 36 rpm Screw driven from btm by 11 KW, 3/50/290/500 volt, 1400 rpm motor, W/pneumatic operated discharge valve Top has 600mm manway w/cover 1-150mm light, 1-200mm feed.

Mixer-Nauta 7,000 L (1,849 gallons) Stainless Steel 304 - IPP# 94100

• Manufacturer: Nauta

single screw Nauta mixer. Mixing chamber 120" dia x 173" cone. Rotating arm driven by 2 HP, 3/60/230/460 volt, 1725 rpm motor. Openings: 2-24", 2-8". Screw has bottom steady bearing. Shaft speed 59.87 rpm, rotati...