Used Processing in New Jersey, USA

Pump-Vacuum Carbon Steel - IPP# 211744

• Manufacturer: Leybold-Heraeus

rotary lobe vacuum pump motor type eAM180MZ2Ex, ExeG3 openings (2) 200mm inside diameter

Pump-Vacuum 815 m3/h (479.7 CFM) - IPP# 211637

• Manufacturer: Leybold-Heraeus

Leybold-Heraeus DK200 Pump-Vacuum - IPP# 211641

• Manufacturer: Oerlikon - Leybold

Pump-Vacuum 815 m3/h (479.7 CFM) - IPP# 211630

• Manufacturer: Leybold-Heraeus

Pressure range: -1/+10 mbar Oil Seal vacuum pump Motor type 1MA2778/4BA29-Z, ExeG3

Pump-Vacuum 509.7 m3/h (300 CFM) - IPP# 213342

• Manufacturer: Kinney/Tuthill

@ .5 torr oil seal vacuum pump 3/60/230/460 volt motor.

Stainless Steel SIHI LPHC-45317 Pump-Vacuum - IPP# 213291

• Manufacturer: Sihi

water seal BN 11/424 230YY/460Y volts Amps 25.4/12.7 Type RGZZSD Tesc 60 hz, Kvs code H.

Stainless Steel SIHI Pump-Vacuum - IPP# 213248

• Manufacturer: Sihi

water seal vacuum pump, close coupled to a 7.5 HP motor,

Pump-Vacuum Stainless Steel - IPP# 213247

• Manufacturer: SIHI

water seal vacuum pump close coupled to a 7.5 HP motor

Rotary Pump 41.8 m3/h (183.9 GPM) Duplex - IPP# 211908

• Manufacturer: SSP Pumps LTD.

Pump type: Duplex s/steel positive displacement rotary lobe pump differential pressure 20 bar Inlet/outlet size: 2-50mm openings for screw type fittings

Rotary Pump 41.8 m3/h (183.9 GPM) Duplex - IPP# 211907

• Manufacturer: SSP Pumps LTD.

Duplex positive displacement rotary lobe pump differential pressure 20 bar 2-50mm openings for screw type fittings

Mikro 6MA Jet Pulverizer - IPP# 220750

• Manufacturer: Jet Pulverizer

Ni-Resist, Micro Atomizer Atomizer set up in its own building complete with the following accessories: Feed hopper is 33" wide x 39" long, Super sack unloader with dust collector & bagger, 50 Sq.Ft., 304 SS bagho...

Carbon Steel Hammer Pulverizer - IPP# 221292

• Manufacturer: Williams

Hammer mill pulverizer with product heater with left hand drive Rated for 1200 rpm with 12 hammers Machine has auto oiler for bearings. With Spinner and blower to move sized product to plant. Weight on hammer mil...

Stainless Steel 304 Hosokawa Mikropul ACM 60-IS PSR-11 Air Classifier mill - IPP# 235954

• Manufacturer: Hosokawa

Milling package including Mikro ACM 60-IS PSR-11 milling machines Rated for 1500 kg./Hr., rated for 11 bar at 70 degrees C., with a 36 pin disk and a 24 blade classifier. Classifier is rated max. 3100 rpm. speed ...

Stainless Steel 304 Hosokawa Mikropul ACM 60-IS PSR-11 Air Classifier mill - IPP# 235955

• Manufacturer: Hosokawa

Milling package Mikro ACM 60-IS PSR-11 milling machines. Rated for 1500 kg./Hr., rated for 11 bar at 70 degrees C. with a 36 pin disk and a 24 blade classifier. Classifier is rated max. 3100 rpm

Major Items Plastic - IPP# 221334

• Manufacturer: Conair-Jetro

Width: 24" Cutting method: Wet Pelletizer type: Waterslide Controls: Explosion proof Cutter head: Belt driven Pneumatic assist cover