Used Meat & Poultry Processing in Sweden

Slaughter hanger without rollers

Rühle PR 15

• Manufacturer: Rühle
• Model: PR15

Machine length 1,270 mm - 2,250 mm Machine width 500 mm Machine height 1,586 mm Machine weight 150 kg Pressure 0.5 - 4.3 bar Inlet height 180 mm Rows with needles 2 Connected power 400 V, 1.8 kW, 16 A Performance...

Roll hook stand 123x82cm

rolls for slaughter hook 10 and 12mm

Bearings for roller hook and slaughter hook Standard for Swedish return hook 35x34mm Available for 10mm and 12mm Axle You can grease the bearings with a grease nipple

Glide hook 250kg

New sliding hooks intended for 250kg

Roll hook 48cm

Return system, working rollers About 300 in stock

Salt Injector Fomaco FGM 16/64

• Manufacturer: Fomaco
• Model: FGM 16/64

Salt injector from Fomaco with extra thin needles. 64 needles 1.5 mm

Tärningsmaskin Rühle SR 1 #2699

• Manufacturer: Rühle
• Model: SR1

Installed contactors Replaced magnet for knife door Tool: 6mm Worked fine!

Vacuumfiller Handtmann VF 200 #2690

• Manufacturer: Handtmann
• Model: VF200

Repaired circuit board for the lift Changed hydraulic oil New knee lever

Cutting machine Berkel EPB 834 -2007 #2616

• Manufacturer: Berkel
• Model: 834

Tested, works well

Maja ESB 4434/2P -2011 #2571

• Manufacturer: Maja
• Model: ESB 4434

New pressure roller New chain Tested works fine

Tenderizer Schröder MacMax 500 #2536

• Manufacturer: Schroeder

All bearings and seals new for the rollers. New radial seals on the gearbox. New button rubbers. Replaced feet. Reinstalled a magnetic switch. NOTE: The machine lacks switches for the in and out belts (bypassed)

Mixer grinder PSV HM 45l 98

• Manufacturer: PSV

Housing: 98mm Unger 5 (2 knives, 3 plates) Dimensions: 829 X 621 X 1299mm Volume: 45liter/35kg Weight: 110kg Capacity 600kg/h Motor: 3hp/2.2 kW Mixer: 0.75/hp/ 0.55kw

Mixer grinder PSV HM 45L 98ST

• Manufacturer: PSV

Dimensions: 828 X 632 X 661 Volume: 45liter/35kg Weight 90kg Capacity: 600kg/h Motor: 3hp/2.2 kW Mixer: 0.75/hp/ 0.55kw

Dice machine Treif Taurus -2003 #2492

• Manufacturer: Treif
• Model: Taurus

Disconnected power to the lift. Tested, works fine! Tool: 30x30mm