Used Machine Tools in Saxony, Germany

Fastening material, usually FISCHER, approx. 15 packs

• Manufacturer: Fischer

Fastening material, mostly FISCHER, approx. 15 packs, mostly partially used.

BENNING DUSPOL Expert 12-1000 V voltage tester

BENNING DUSPOL Expert 12-1000 V voltage tester

Installation material, mounting material, contents of 80 storage boxes

Installation material, mounting material, contents of 80 storage boxes, plus storage boxes

MANNESMANN rotary hammers, approx. 2 pieces

MANNESMANN rotary hammers, approx. 2 pieces, in plastic cases

Pressing jaws NUSSBAUM VIEGA 357139 20 and 16 mm approx. 2 pieces

Clamping jaws NUSSBAUM VIEGA 357139 20 and 16 mm approx. 2 pieces, plastic case

HT and KG branch extensions

HT and KG branch pipes, extensions, etc., contents of the plastic case, plus plastic case

Würth H2 RLE rotary hammer

Würth H20 RLE rotary hammer, 500 W, 220 V, with chuck, no further data legible, in Würth plastic case

Aluminum step ladder LAYHER approx. 2x4 rungs

• Manufacturer: Layher

Aluminum step ladder LAYHER approx. 2x4 rungs

Construction site radio MAKITA BMR 100

• Manufacturer: Makita

Construction site radio MAKITA BMR 100, 18 V, S/N 170616E

SUHNER® machining spindle

• Manufacturer: Suhner

Machining spindle, drilling unit SUHNER® POWERmaster UA35 UA35 CNC 160A AMHE 100L BA4 3.0 kW 1440 rpm 230 / 400 V 3AC 50 Hz 60 Hz - Operation is possible ! IP55 Carriage motor: REXROTH MSK061C-0600-NN-M1-UP0-NNNN...

PAGUS clamping angle

• Manufacturer: Pagus

Clamping angle, angle table PAGUS used, tested ! Heavy duty version!!!

WIDIA clamp holder

• Manufacturer: Pagus

Clamp holder, tool holder, tool carrier WIDIA WIDAX 225.15.623.00 New !

connection make on the pull

Grinding spindle SAAKE UW II A CNC 1x outer taper, diameter: Ø 17 / 23 mm, length: 38 mm with thread: M28 x 1.5 Length: 15 mm Clamping nut: Internal thread: M28 x 1.5 / 1 inch V-ribbed belt pulley: Diameter: Ø 62...

GMN grinding spindle

Grinding spindle GMN TSAV 40 s x 208 - 6002 ( TSAV40sx208-6002 ) Tool holder / drive: Ø 11 / 13 mm, length: 15 mm ( Thread: M10 x 1.0, length: 10 mm, left-hand thread Flange: 85 x 56 x 8.5 mm, Bore: Ø 22 mm used,...

STANKO grinding spindle

• Manufacturer: Stanko

Grinding spindle STANKO BC3-1976 3K227B-94 Tool holder: Ø 28 mm, length: 29 mm Bore Ø 16 mm, depth: 25 mm,m subsequently with internal thread: M12 x 1.75, thread length: 20 mm Flat belt pulley: Ø 40 mm, width: 60...