Used Cut To Length Lines

Manual cutting machine for aluminum

• Manufacturer: Emmegi
• Model: 350 S

with pneumatic clamps - Volt 400 - HP 3 - 2.2 Kw. - RPM 2890

1995 SACMA SP350M

• Manufacturer: Sacma

Info: bushing cut-off , PKO | Diameter range: 14 mm | Number of dies: 4 | Number of stations (incl. cut off): 5 | Output – pieces/min: 200 | Shaft length under head: 90 mm | Cutting length: 127 mm

1988 NAKASHIMADA NP60

• Manufacturer: Nakashimada

Info: bushing cut-off , PKO | Diameter range: 3-7 mm | Number of dies: 2 | Number of stations (incl. cut off): 4 | Cutting length: 60 mm | Shaft length under head: 50 mm | Output – pieces/min: 200

1968 NATIONAL M68HSDSSD

• Manufacturer: National

Info: bushing cut-off | Diameter range: 8 mm | Shaft length under head: 45 mm | Max. cut-off length: 60 mm | Output – pieces/min: 300

1998 JERN YAO JNFP-19B5S

• Manufacturer: JERN YAO

Info: bushing cut-off | Diameter range: M12 | Number of dies: 5 | Number of stations (incl. cut off): 6 | Cutting length: 20 mm | Max. width across flats: 19 mm | Output – pieces/min: 210 | Press power: 140 | Sh...

2005 LIAN SHYANG LS-C-NF-14B6LS

• Manufacturer: LIAN SHYANG

Info: bushing cut-off | Diameter range: 15 mm | Number of dies: 6 | Number of stations (incl. cut off): 7

СTL line Spotti 1550x6x25t (flying shear, two levelers)

• Manufacturer: Spotti/LDM

СTL line Spotti 1550x6x25t is used for coil metal processing with 6mm maximum metal thickness. Line is equipped with two levelers and flying shear Line consist of uncoiler, two levelers, flying shear, stacker

Cut-to-Length

• Manufacturer: Cut-to-Length

Infeed parts cut-to-length complete line the system is equipped with an S5 controller, which is also used to control a stacker with an outlet section. Stacking at the including roller and chain tables, The compon...

F&P Metal coil cutting - automatic lines

• Manufacturer: Floreani & Partners

Floreani & Partners +39 393 577 2205 Alex/mob. alex.groupmarketing@gmail.com Design, construction, revamping, automation. Buy and sell used lines We operate all over the world -

F&P Flying Shear CTL Line (New) #3536.1

• Manufacturer: Floreani & Partners

New Flying Shear Cut To Length Line 1600mm x max. 4mm Aluminium CUSTOM DESIGNED -- 6m Dual Box Sheet Stacker Speed max. 45m / min -- Flying shears accelerate to line speed, make the cut and decelerate. Although ...

Cut-to length slitting machine SM-1250х8

• Manufacturer: Evolutioner

Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on r...

F&P Rotary Shear CTL Lines (New) #3535.1

• Manufacturer: Floreani & Partners

2000mm wide lines with precision 6-HI leveler Max. 6mm material thickness Typical line speed: up to 60m / minute Decoiler up to 30ton capacity -- Rotary Shear info & video: in Listing #3259 [Section: Shears for ...

F&P Cutting and surface finishing lines for stainless steel coils & plates

• Manufacturer: Floreani & Partners

New and Used of any capacity -

Single blade cutting line product code: 27908

Hurry! This product has already been viewed 1,693 times! Don't miss out! Don't miss out on this deal Single-blade cutting line, 500mm wide with reel winder, capacity approximately 1.5-2 tons felt press Available ...

2015 dimeco dimeco

• Manufacturer: Dimeco

Pivatic perforating and bendingline Cut-to-Length Line is manufactured in 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is sep...