Building Filters
- Trusted Seller

TIN KNOCKER THE WIZARD
- Manufacturer: Tin Knocker
TIN KNOCKER 5 ft x 10 ft The Wizard HVAC Plasma Cutting System was developed specifically for the HVAC contractor/fabricator. Currently in stock and ready to ship! PLUG & PLAY!Includes full HVAC Software. 5’x10’ ...
- Trusted Seller

TIN KNOCKER TK5
- Manufacturer: Tin Knocker
TIN KNOCKER Liner Table has a max roll width of 5 feet.The Tin Knocker manual insulation cutter slits fiberglass insulation to length and width.Once the material is at the desired length the operator pulls the ha...
$3,905 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK 816
- Manufacturer: Tin Knocker
- Model: TK816
TIN KNOCKER TK 816 Manual Leaf Brake has a bending length of 8 feet and capacity of 16 gauge. These are industrial quality brakes, the kind you use over a lifetime. Our straight brakes set the standard for qualit...
- Trusted Seller

TIN KNOCKER TK1
- Manufacturer: Tin Knocker
- Model: TK1
TIN KNOCKER TK1 throatless Hand Shear has a mild steel max capacity of 14 gauge.With these shears virtually any desired cut can be made with most metals. Designed to be bench mounted. Unique shoulder design that...
$575 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK 1624
- Manufacturer: Tin Knocker
- Model: TK1624
TIN KNOCKER TK 1624 is a Slitter with 16 gauge capacity.The TK1624 is a Sturdy 24 inch throat slitter with quick adjusting back gauge and scale. TK 20 Ga and 16 Ga Slitters: Sturdy 24 inch throat slitters with qu...
$4,270 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK 2024
- Manufacturer: Tin Knocker
- Model: TK2024
TIN KNOCKER TK 2024 Slitter has a capacity of 20 gauge and 24 inch throat. The motor is 1/2 hp and 115 volt. Has quick adjusting back gauge and scale. TK 20 Ga and 16 Ga Slitters: Sturdy 24 inch throat slitters w...
$3,570 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK FOURPLEX
- Manufacturer: Tin Knocker
- Model: TK FOURPLEX
TIN KNOCKER Fourplex S & Drive Cleat Former w/Slitter Attachment has a capacity of 20 gauge. The motor is 5 HP (1,800 RPM) 230 Volt, 3 Phase, 60 Hz. Comes standard with S & Drive Slitter to turn scrap into useful...
- Trusted Seller

TIN KNOCKER TK1016
- Manufacturer: Tin Knocker
- Model: TK1016
TIN KNOCKER TK 1016 Hydraulic Duct Notcher has a mild steel capacity of 16 gauge. This 5 headed gang notcher is a fast and easy way to notch sheet metal ducting, in preparation to receive bar, S Cleats and Drive ...
- Trusted Seller

TIN KNOCKER TK 1652
- Manufacturer: Tin Knocker
- Model: TK1652
TIN KNOCKER TK 1652 Foot Operated Shear has a shearing length of 52 inches and a mild steel capacity of 16 gauge.Has Precise gauging, beefy hold downs for shearing accuracy and Easy to operate.Comes with 25 inch...
$4,690 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK 1018
- Manufacturer: Tin Knocker
- Model: TK 1018
TIN KNOCKER TK 1018 Manual Leaf Brake has a bending length of 10 feet and capacity of 18 gauge. Full length stiffening bar to bend to capacity. Spring steel nose bar for long lasting durable service. Tin Knocker ...
- Trusted Seller

TIN KNOCKER TK HAMMER
- Manufacturer: Tin Knocker
TIN KNOCKER Pittsburgh Air Hammer has a capacity of 16 gauge.Closes up to 16 Ga. Fast and Easy! Precision machined parts from cast steel and aluminum – heat treated for longevity. This hammer is Durable, Reliable...
$295 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK 20
- Manufacturer: Tin Knocker
- Model: TK20
The TIN KNOCKER TK20 Pittsburgh Roll Former has a 20 gauge capacity and comes with Acme Rolls and 20 gauge Flanger.20 ga. Flanging Attachment included in price.5 station 20 Gauge Pittsburgh lock rollformer is off...
- Trusted Seller

TIN KNOCKER TK 1655
- Manufacturer: Tin Knocker
- Model: TK1655
TIN KNOCKER TK1655 Manual Corner Notcher has a mild steel capacity of 16 gauge.Heavy versatile tool notches but also does shearing and piercing operations in lighter gauge.Heavy cast iron and fabricated construct...
$1,270 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK 1648
- Manufacturer: Tin Knocker
- Model: TK1648
TIN KNOCKER TK 1648 Manual Slip Roll has a max forming length of 49 inches and mild steel capacity of 16 gauge. Stand included.Includes two crank handles for heavy capacity forming. All rolls are gear driven. The...
$2,685 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK 1660
- Manufacturer: Tin Knocker
- Model: TK1660
The TIN KNOCKER TK 1660 is a Duct Beader with the Galvanized Mild steel capacity of 16 ga x 60 inch working length.This is an Adjustable beader and Produces SMACNA approved beads in a fraction of the time it take...

Tin Knocker TK18 Punch Machine
- Manufacturer: Tin Knocker
- Model: TK18
Good condition Tin Knocker TK18 Punch Machines. Located in USA and other countries. Click request price for more information.
USA
