- Trusted Seller
2025 QUICK 14 SECTION STANDARD DUTY-P CLAMP CARRIER (PNEUMATIC) [CR-300040]
- Manufacturer: QUICK
²QUICK 14-Section Pneumatic Clamp Carrier with 10-1/2' width capacity With (8) Standard zinc plated clamps per section (112) clamps total), 38" opening on clamps Standard Features include: -- Clamps jaws are 2-1/...
- Trusted Seller
2025 QUICK 40 SECTION HEAVY DUTY CLAMP CARRIER (HYDRAULIC) [CR-300027]
- Manufacturer: QUICK
QUICK 40 Section 10.5' Heavy Duty Hydraulic Clamp Carrier: -- Clamp Carrier: (40) Sections with 10-1/2' width cap., -- (10) heavy duty zinc plated clamps per section (400 clamps total), 40" opening on clamps w...
- Trusted Seller
2025 QUICK 14 SECTION STANDARD DUTY-P CLAMP CARRIER (PNEUMATIC) [CR-300007]
- Manufacturer: QUICK
QUICK 14-Section Pneumatic Clamp Carrier with 8-1/2' width capacity With (6) Standard zinc plated clamps per section (84 clamps total), 32" opening on clamps Standard Features include: -- Clamps jaws are 2-1/2" h...
- Trusted Seller
2025 RITTER R-275 E/A CLAMP (FACE FRAME & CABINET DOOR) [CF-300123]
- Manufacturer: Ritter
- Model: R-275
RITTER - R-275 E/A, ...Face Frame & Door Assembly System Dimensions: 4' x 8' --Bed angle: 45° -- Hold down beam clamping arm with: (3) Adjustable hold down cylinders. -- (4) Universal clamping cylinders with: 3" ...
- Trusted Seller
TAYLOR 40 SECTION CLAMP CARRIER (AUTOMATIC) [CR-011128]
- Manufacturer: Taylor
- Model: 40 SECTION
TAYLOR 40 Section Clamp Carrier. Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pa...
- Trusted Seller
2025 CANTEK CFS-100/EM-12 DEFECTOR & END MATCHER/FINGER JOINT BLOCK [EM-010002]
- Manufacturer: Cantek
CANTEK MODEL CFS100 / EM-12 DEFECT SAW AND END-MATCHING SYSTEM: Consisting of a CANTEK model "CFS-100" Optimizing Cut-Off Saw followed by a CANTEK Model "EM 12" Through-Feed End Matcher and with the following spe...
United States - Trusted Seller
2024 ALFAMACHINE U 500 UNDERPINNER [SC-012653]
- Manufacturer: Alfamacchine
ALFAMACHINE U-500 Underpinner Recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the capability of joining single level or mul...
- Trusted Seller
1979 TAYLOR 12 SECTION CLAMP CARRIER (PNEUMATIC) [CR-011131]
- Manufacturer: Taylor
TAYLOR - 800036: 7' W, 12-Section Semiautomatic Pneumatic Clamp Carrier with Flattener & Tightener Equipped with: -- (71) 32 Cap. Clamps with: 4-5/8 W x 3-1/2 H Jaws. -- Air motor drive. -- Dual foot pedal contro...
- Trusted Seller
2025 CAM-WOOD UTC-305 FINGER JOINTER - LONG BOARD [FJ-300034]
- Manufacturer: Cam-Wood
CAM-WOOD Continuous in-line Long Board Vertical Finger Joint System, Model "UCT-305" Up to 12 Wide x 4-1/4" Thick x Unlimited Assembled Length System Specifications: -- Incoming board lengths from 39 to 236" (1,0...
- Trusted Seller
2025 CAM-WOOD FAH TYPE F1 8-20 FINGER JOINTER (HORIZONTAL JOINT) [FJ-300032]
- Manufacturer: Cam-Wood
CAM-WOOD TYPE F1, MODEL FAH 8" X 20’ AUTOMATIC HORIZONTAL FINGER JOINT SYSTEM - SINGLE CHAIN TYPE (including Feeding System from Optimizing saw) Technical Specifications: -- Working thickness: 17 mm to 60 m...
$558,500 USDUnited States - Trusted Seller
2025 CAM-WOOD FAH TYPE F1X FINGER JOINTER (HORIZONTAL JOINT) [FJ-300030]
- Manufacturer: Cam-Wood
CAM-WOOD TYPE F1, MODEL FAH 8" X 30’ HORIZONTAL FULLY AUTOMATIC FINGER JOINT SYSTEM - SINGLE CHAIN TYPE MECHANICAL SPECIFICATIONS FOR THE FEED SYSTEM: -- Operating speed: 120 to 150 lugs/Min -- Intermittent...
$505,800 USDUnited States - Trusted Seller
2025 CAM-WOOD FSG-150X GLUE APPLICATOR (FINGER JOINT) [FJ-300028]
- Manufacturer: Cam-Wood
CAM-WOOD MODEL FSG-150X Manual FINGER JOINT GLUE APPLICATOR -- Manual operation of sliding table ; Specification: -- Glue roller type -- Working width 24" maximum -- Working thickness 6" -- Glue roller drive 1/2 ...
- Trusted Seller
2025 QUICK 20 SECTION HEAVY DUTY-H CLAMP CARRIER (HYDRAULIC) [CR-010832]
- Manufacturer: QUICK
QUICK 20 Section 16.5' Heavy Duty Clamp Carrier Specifications: -- 20-Section Thick Stock Pneumatic Clamp Carrier; 16-1/2' width cap.; -- (12) Clamps, each with 3 1/2" high jaws and 44" clamp opening for a total ...
- Trusted Seller
2025 RITTER R-200 E/A CLAMP (FACE FRAME & CABINET DOOR) [CF-300121]
- Manufacturer: Ritter
- Model: R-200
RITTER R-200 E/A Face Frame Assembly Easel Dimensions 5' x 12' with 45° Bed angle; Specifications: -- Hold-down beam with (5) adjustable hold down cylinders. -- Squaring bars on left, right and bottom sides. -- ...
- Trusted Seller
2025 CAM-WOOD IAT-620-6-195X FINGER JOINTER (MEDIUM PRODUCTION) [FJ-300026]
- Manufacturer: Cam-Wood
CAM-WOOD IAT 620-150H INVERTER DRIVEN FINGER JOINT SYSTEM 3" X 6": Lay-Up and Block-Staging Infeed Conveyor: -- 24" Wide x 31.5" long belt conveyor powered with 1/2 HP motors. Conveyor is controlled by the operat...
United States 
Pillar Machine Boa-M Boring, Dowel inserting, Gluing
- Manufacturer: Pillar Machine
- Model: Boa-M
Good condition Pillar Machine Boa-M Boring, Dowel inserting, Gluings. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword