Machine Tools » Threading & Tapping

Building Filters

69

Used volts

  • Trusted Seller
    2” RIDGID NO. 535 PIPE

    2” RIDGID NO. 535 PIPE & Bolt THREADER

    • Manufacturer: Ridgid
    • Model: 535

    2” RIDGID NO. 535 PIPE & Bolt THREADER Features Foot pedal control Specifications This Ridgid No. 535 pipe threader is capable of threading 1/8” to 2” diameter pipe and 1/4” to 2” diameter bolts. It comes equippe...

    Granger, IA
  • 1990 Machine - WILTON STRAND

    1990 Machine - WILTON STRAND 24” Heavy Duty Sliding Head Geared Drilling Machine with Tapping

    • Manufacturer: Wilton

    Distance Front of Column to Center Spindle: 13” Equipment Tapping Control Jacobs Drill Chuck with Adaptor Stock #7728P Serial #808

    $2,950 USD
    Charlotte, NC
  • Trusted Seller
    1945 Carlton Machine Tool Company

    1945 Carlton Machine Tool Company 4' x 9"

    • Manufacturer: Carlton

    Radial Drill Features and Specifications: ...Base Coolant ...Power Elevation & Clamping Specifications taken from owner interview, information submitted by owner, manuals, and OEM research. While specifications a...

    Starkville, MS
  • Trusted Seller
    1942 Cincinnati Bickford Super Service

    1942 Cincinnati Bickford Super Service

    • Manufacturer: Cincinnati Bickford
    • Model: SUPER SERVICE

    Radial Drill Features and Specifications: ...#6 Morse Taper ...Coolant Sump ...Power Rapid Traverse ...Clamping Specifications taken from owner interview, information submitted by owner, manuals, and OEM research...

    Starkville, MS
  • Toledo-Beaver Model SOM Pipe &

    Toledo-Beaver Model SOM Pipe & Bolt Threader M3996

    • Manufacturer: Toledo

    Tested by: TJ | Volts: 115 | Amps: 9 | Dimensions: 48"L x 24"W x 48"H | Hp: 0.50

    $1,200 USD
    Oceanside, CA
  • RIDGID 802 PIPE THREADING MACHINE

    RIDGID 802 PIPE THREADING MACHINE

    • Manufacturer: Ridgid
    • Model: 802

    RIDGID 802 PIPE THREADING MACHINE SINGLE PHASE ***SPECIFICATION SHOWN ARE TO BE USED AS A GUIDELINE ONLY. IT IS THE CUSTOMERS RESPONSIBILITY TO CHECK FOR SIZE AND FEATURES BEFORE PURCHASING WE WILL NOT BE RESPONS...

    $1,600 USD
    Santa Paula, CA
  • Trusted Seller
    Leeland Gifford No. 2 Multi-Speed

    Leeland Gifford No. 2 Multi-Speed

    • Manufacturer: Leeland Gifford

    Drill Press Features and Specifications: ...Drill Sizes (24) ...Cutting Speeds (3) ...On/Off Foot Switch ...Drill Chuck Approximate specifications and functionality history is taken from 1st-hand inspection, owne...

    Portland, OR
  • Trusted Seller
    THRED O MATIC A60 PIPE

    THRED O MATIC A60 PIPE THREADER

    • Manufacturer: THRED O MATIC

    Thred O Matic model A60 pipe threader 1/2" - 2" CAPICITY FOOT PEDAL CONTROL 115 VOLT WITH 2 DIE HOLDERS

    Cleveland, OH
  • Trusted Seller
    WHEELER-REX 6390

    WHEELER-REX 6390

    • Manufacturer: WHEELER-REX

    Voltage: 120 volts | Phase: Single-phase | Amps: 9 amps | Made in: JAPAN | Maximum pipe range: 1/4" - 2"

    $2,112 USD
    British Columbia, Canada
  • Trusted Seller
    Hypneumat Inc. #S200EHB Drill and

    Hypneumat Inc. #S200EHB Drill and Tap Machine

      Location San Antonio. TX Lot # 101 System ID # 4230905 End Date Central Standard Time Start Date Central Standard Time Item # 4230906 Leeson 1/2 HP Motor, 230/460 Volt, 50/60HZ

      Chicago, IL
    • Trusted Seller
      #40 WATERBURY HORIZONTAL – LIGHT

      #40 WATERBURY HORIZONTAL – LIGHT FRAME

      • Manufacturer: Waterbury Farrel

      480 VOLT – OIL TRAY – BIJUR LUBE SYSTEM REF. 4954 #40 waterbury horizontal flat die hand feed: LIGHT FRAME

      Byron, IL
    • Trusted Seller
      #20 Waterbury Horizontal Thread Roller

      #20 Waterbury Horizontal Thread Roller / VF Drive / Adjustable Pitman

      • Manufacturer: Waterbury Farrel

      Horizontal Thread Roller Adjustable pitman VF Drive 220 volt

      Byron, IL
    • Trusted Seller
      #20 Waterbury Thread Roller Set

      #20 Waterbury Thread Roller Set for Tube Feeding

      • Manufacturer: Waterbury Farrel

      HEAVY FRAME BOWL + TUBE INTACT SET UP FOR HEADLESS STUDS 480 volt Located in Byron, IL

      Byron, IL
    • Trusted Seller
      no-image_en.png

      HARTFORD #0-400

      • Manufacturer: Hartford
      • Model: 0-400
      • Threading length: 41.275 millimeter

      Production: 250 - 400 PPM | Screw diameter capacity: .187" | Thread length capacity: 1.625" | Equipped with: 220 Volts

      Ivyland, PA
    • Oster 4″ Pipe Threader

      Oster 4″ Pipe Threader

      • Manufacturer: Oster

      Return To: THREADER 400 Volt W/ several Die Heads S/N: 784-NS105 Good Condition

      $6,500 USD
      Rochester, NY
    12345

    Overview

    Threading and tapping machines are used in manufacturing to create threads inside holes (tapping) or on the exterior of components (threading). These machines are essential for producing threaded parts that fit together with screws, bolts, or other fasteners, ensuring precision and consistency in mechanical assemblies.

    FAQ

    What factors should I consider when buying a used threading or tapping machine?

    Consider the machine's age, condition, and maintenance history. Check for any signs of wear or damage and ensure it meets the specific threading and tapping requirements of your projects.

    How can I safely ship a threading or tapping machine?

    Use a reliable transport service that specializes in heavy machinery. Ensure the machine is securely fastened and properly protected to avoid damage during transit.

    What maintenance is required for threading and tapping machines?

    Regular maintenance includes lubricating moving parts, checking for wear and tear on essential components, and ensuring the machine's calibration remains accurate. Refer to the manufacturer's manual for a detailed maintenance schedule.