Machine Tools » Threading & Tapping

Building Filters

573

Used 75

  • Trusted Seller
    Tapmatic Synchroflex ER25 Rigid Tapping

    Tapmatic Synchroflex ER25 Rigid Tapping Chuck W/ HSK63A Holder SFT75 (LOC9)

    • Manufacturer: Tapmatic

    Tapmatic Synchroflex ER25 Rigid Tapping Chuck W/ HSK63A Holder SFT75 (LOC1813A) Condition:Used M8 - M20 1/4 - 3/4 - 10

    $600 USD
    Lansing, MI
  • Trusted Seller
    PRUTTON 75A-24

    PRUTTON 75A-24

    • Manufacturer: Prutton
    • Model: 75A-24
    • Threading length: 50.8 mm

    Capacity: #4 Screws to 1/4" | Maximum thread length: 2" | Maximum length under head: up to 3" | Overall nail blank lengths: up to 2-1/2" | Speed range: up to 600 PPM | Approx. weight: 2500 lbs | Approx. floor si...

    Ivyland, PA
  • Trusted Seller
    Tapmatic Synchroflex ER25 Rigid Tapping

    Tapmatic Synchroflex ER25 Rigid Tapping Chuck W/ HSK63A Holder SFT75 (LOC3055B)

    • Manufacturer: Tapmatic

    Tapmatic Synchroflex ER25 Rigid Tapping Chuck W/ HSK63A Holder SFT75 (LOC3055B) Condition:Used M10 - M20 3/8 - 3/4 - 10

    $600 USD
    Lansing, MI
  • Trusted Seller
    REED 75

    REED 75

    • Manufacturer: Reed
    • Threading length: 76.2 mm

    Equipped With * 24' Vibratory Bowl * Bulk Feeder Thread diameter: .050" - .200" (Ring shank) | Max. thread length: 3" | Dies: 7" Rotary (90deg seg) | Speed: 2000 ppm | Motor: 15hp | Electrics: 480volts/3ph/60cyl ...

    Vaughan, Canada
  • Trusted Seller
    PRUTTON 75 CNVB

    PRUTTON 75 CNVB

    • Manufacturer: Prutton
    • Model: 75CNVB

    Equipped With * 24' Vibratory Bowl * Bulk Feeder Thread diameter: .050" - .250" | Max. thread length: 2-7/8" | Shank length: 4" | Dies: 90deg seg | Speed: 1500 ppm | Electrics: 480volts/3ph/60cyl | Weight: 3000 L...

    Vaughan, Canada
  • Trusted Seller
    PRUTTON 75A-24R

    PRUTTON 75A-24R

    • Manufacturer: Prutton
    • Model: 75A-24
    • Threading length: 50.8 mm

    Equipped With Max screw diameter: 1/4" | Max. thread length: 2" | Shank length: 3" | Speed: 400 ppm | Weight,approx: 2,500 Lbs.

    Vaughan, Canada
  • Trusted Seller
    Emuge SK40 7/8"-1.75" (M22-M48) Tension/Compression

    Emuge SK40 7/8"-1.75" (M22-M48) Tension/Compression Tapping Chuck F3305781.16 (L

    • Manufacturer: Emuge

    Mpn: F3305781.16 | Material: Steel | Spindle type: SK40 | Tension / compression: Yes | Warehouse location: LOC3588A | Shank capacity: 7/8"-1-3/4" (M22-M48) | Edp: 55033589

    $1,850 USD
    Lansing, MI
  • LANDIS Thread Chaser, 96-003732 .75

    LANDIS Thread Chaser, 96-003732 .75 x 1.62, 24P UN STD SHT

    • Manufacturer: Landis

    LANDIS Thread Chaser, 96-003732 .75 x 1.62, 24P UN STD SHT LANDIS Thread Chaser, 96-003732 .75 x 1.62, 24P UN STD SHT Click images to enlarge Description INV 5854 Surplus chasers fresh from large Mfg. plant's too...

    Savage, MN
  • Trusted Seller
    2011 REMS UNIMAT 75

    2011 REMS UNIMAT 75

    • Manufacturer: Rems
    • Model: Unimat 75

    REMS Unimat 75 Semi-Automatic Threading Machine with hyd/pneumatic clamping outfitted for 1-2” NPT threading DESCRIPTION:Thread cutting machine “REMS Unimat 75″ is a semi-automatic high-performance machine for ef...

    Phoenix, AZ
  • Trusted Seller
    KINEFAC MC-4 CNC 2- Roll

    KINEFAC MC-4 CNC 2- Roll

    • Manufacturer: KINEFAC

    Spindle diameter: 1-1/2" (40mm) | Maximum die width: 2-5/8" (115mm) | Die diameter range: 3 - 4 - 3/8" (75mm - 110mm) | Minimum diameter in or thrufeed: 1/32" (1mm) | Maximum diameter thru feed: 3/4" (20mm) Unli...

    Ivyland, PA
  • Trusted Seller
    2008 Fanuc A-T21iFL

    2008 Fanuc A-T21iFL

    • Manufacturer: Fanuc
    • Model: A-T21IFL

    MACHINE EQUIPPED WITH Renishaw Probing included 21 Tool Capacity Extended X-axis Travel: 27.5" Extended Table Length: 33.4" Coolant tank Spindle Chiller Used 2008 Fanuc A-T21iFL. Machine Tool Bids offers plenty o...

    Chicago, IL
  • Trusted Seller
    2008 Fanuc A-T21iFL

    2008 Fanuc A-T21iFL

    • Manufacturer: Fanuc
    • Model: A-T21IFL

    Renishaw Probing included 21 Tool Capacity Extended X-axis Travel: 27.5" Extended Table Length: 33.4" Coolant tank Spindle Chiller Used Fanuc A-T21iFL. This pre-owned Drill and Tap is in great working condition a...

    $29,500 USD

    Get financing

    Est. $555/mo

    Chicago, IL
  • Hypneumat LS300E 8706-B Tapping Unit

    Hypneumat LS300E 8706-B Tapping Unit W/1Hp Motor 3Ph 230/460V & Gear Reducer

    • Manufacturer: Hypneumat

    Hypneumat LS300E 8706-B Tapping Unit W/1Hp Motor 3Ph 230/460V & Gear Reducer 3" Stroke Pacemaker Main Motor Drive 230/460 Volt 3Ph Cont Duty Pacemaker Gear Reducer Input Rpm: 1800/Output Rpm: 280 6.2 Ratio FMC St...

    Watertown, CT
  • 1/2″ Saspi GV3-20 Thread Roller

    1/2″ Saspi GV3-20 Thread Roller

    • Manufacturer: SASPI
    • Threading length: 75 mm

    28″ VIBRATORY BOWL ADJUSTABLE PITMAN COOLANT TANK Min/max thread diameter: 5-12mm | Max thread length: 75mm | Max length blank: 100mm | Max height under head: 80mm | Speed: 85-110-170-220 ppm | Motor: 13kW DC & C...

    Posen, IL
  • Trusted Seller
    TSUGAMI R15A

    TSUGAMI R15A

    • Manufacturer: Tsugami
    • Model: R15A
    • Threading length: 150 mm

    Maximum rolling force: 15 TON (M) | Maximum rolling capacity infeed: 75mm | Maximum thread length (infeed): 150mm | Spindle diameter: 54mm | Spindle speeds: (4 Step) 20, 36,58, 82 RPM | Max thread pitch: 5mm | S...

    Ivyland, PA
  • no-image_en.png

    Prutton 75A-24 Threading & Tapping

    • Manufacturer: Prutton
    • Model: 75A-24

    Good condition Prutton 75A-24 Threading & Tappings. Located in USA and other countries. Click request price for more information.

    USA
12345

Overview

Threading and tapping machines are used in manufacturing to create threads inside holes (tapping) or on the exterior of components (threading). These machines are essential for producing threaded parts that fit together with screws, bolts, or other fasteners, ensuring precision and consistency in mechanical assemblies.

FAQ

What factors should I consider when buying a used threading or tapping machine?

Consider the machine's age, condition, and maintenance history. Check for any signs of wear or damage and ensure it meets the specific threading and tapping requirements of your projects.

How can I safely ship a threading or tapping machine?

Use a reliable transport service that specializes in heavy machinery. Ensure the machine is securely fastened and properly protected to avoid damage during transit.

What maintenance is required for threading and tapping machines?

Regular maintenance includes lubricating moving parts, checking for wear and tear on essential components, and ensuring the machine's calibration remains accurate. Refer to the manufacturer's manual for a detailed maintenance schedule.