Machine Tools » Threading & Tapping

Building Filters

232

Used unit

  • Trusted Seller
    WATERBURY #0

    WATERBURY #0

    • Manufacturer: Waterbury Farrel

    Maximum production: 145 - 175 PPM | Maximum thread length: 1-1/2" | Maximum thread diameter: 3/16" | Die pocket depth: 1-5/8" | Length of stationary die: 2-3/4" | Approx. floor size: 38" W x 61" l | Equipped wit...

    Ivyland, PA
  • Trusted Seller
    Sugino Corp. ESEBP-W1B10U #4725

    Sugino Corp. ESEBP-W1B10U #4725

    • Manufacturer: Sugino

    SUGINO 1/2” ELECTRIC SELFEEDER DRILLING UNIT INVENTORY # 4725 S/N 230013 MADE IN JAPAN AIR THRUST FEED AIR-RETURN TYPE ADJUSTABLE DEPTH CONTROL CONTROLS DRILL FEED SPEED (3.15”) (+/-) 0.0008” WITH MECHANICAL FRON...

    $2,250 USD
    Baltimore, MD
  • Auction
    Procunier 3

    Procunier 3

    • Manufacturer: Procunier

    Lot 144 Procunier Model 3 Tapping Head Main unit approx weight: 0.00 lbs | Main unit dimensions (in inches): Length: 0.00"  Width: 0.00"  Height: 0.00" | Dock door: 12' x 14' H Door Ground Level Doors | Loading d...

    Plymouth, MN
    Visit Auction Website
  • Auction
    SpeedyCut ST-0

    SpeedyCut ST-0

    • Manufacturer: SpeedyCut

    Lot 135 SpeedyCut ST-0 Tapping Machine with 5" Throat W/ Foot Pedal, Mounted On Metal Table

    Plymouth, MN
    Visit Auction Website
  • Auction
    SpeedyCut ST-0

    SpeedyCut ST-0

    • Manufacturer: SpeedyCut

    Lot 145 SpeedyCut ST-0 Tapping Machine with 5" Throat W/ Foot Pedal, Mounted On Metal Table

    Plymouth, MN
    Visit Auction Website
  • Auction
    Cedarberg EZ Tapper

    Cedarberg EZ Tapper

    • Manufacturer: Cedarberg

    Lot 39 Cedarberg EZ Tapper Hand Tapping Machine with Taps and Work Bench

    Blaine, MN
    Visit Auction Website
  • Trusted Seller
    MACHINES & TECHNOLOGIES BBW

    MACHINES & TECHNOLOGIES BBW

    • Manufacturer: MACHINES & TECHNOLOGIES

    Equipped With THREAD ROLLING MACHINE TYPE BBW ? The upper die ? which is the longer one of the two dies ? is mounted on a movable slide. ? The lower, fi xed die is clamped into the height-adjustable die pocket by...

    Vaughan, Canada
  • Trusted Seller
    Tanisaka 10-400 with SANMEI SEMS

    Tanisaka 10-400 with SANMEI SEMS

      10-400 Tanisaka Sanmei Sems Unit!

      Byron, IL
    • Trusted Seller
      TSUGAMI R15A

      TSUGAMI R15A

      • Manufacturer: Tsugami
      • Model: R15A
      • Threading length: 150 mm

      Maximum rolling force: 15 TON (M) | Maximum rolling capacity infeed: 75mm | Maximum thread length (infeed): 150mm | Spindle diameter: 54mm | Spindle speeds: (4 Step) 20, 36,58, 82 RPM | Max thread pitch: 5mm | S...

      Ivyland, PA
    • Trusted Seller
      Flexarm GH-45 #8379

      Flexarm GH-45 #8379

      • Manufacturer: Flexarm

      Flexarm 1 1/2″ Hydraulic Tapping Machine, GH-45 Inventory # 8379 Made in USA This arm features a semi-automatic tap lubricator system and a size two quick change chuck For this arm to tap horizontally and vertica...

      Baltimore, MD
    • Trusted Seller
      Flexarm GH-30 #8378

      Flexarm GH-30 #8378

      • Manufacturer: Flexarm

      Flexarm 1 1/4″ Hydraulic Tapping Machine, GH-30 Inventory # 8378 Made in USA This arm features a semi-automatic tap lubricator system and a size two quick change chuck For this arm to tap horizontally and vertica...

      Baltimore, MD
    • Trusted Seller
      Flexarm RNR20-6 #8159

      Flexarm RNR20-6 #8159

      • Manufacturer: Flexarm

      Flexarm 14″ – 72″ Tapping Machine, RNR20-6 Inventory # 8159 Made in USA Tapping Arm Tap Stand Runs on 90 PSI Size 2 Quick Change Chuck

      Baltimore, MD
    • Trusted Seller
      Flexarm A-32 400 RPM #6379

      Flexarm A-32 400 RPM #6379

      • Manufacturer: Flexarm

      Flexarm 11″ – 34″ Tapping Machine Inventory # 6379 Made in USA

      Baltimore, MD
    • Trusted Seller
      Flexarm CVA-30 #6378

      Flexarm CVA-30 #6378

      • Manufacturer: Flexarm

      Flexarm 8″ – 28″ Assembly Arm Inventory # 6378 (Assembly Arm Only – Tooling Not Included) Made in USA These vertical assemblers can withstand motor torque up to 30 foot pounds, for use at various angles, a swivel...

      Baltimore, MD
    • Trusted Seller
      Flexarm RNRM20-4 #8160

      Flexarm RNRM20-4 #8160

      • Manufacturer: Flexarm

      Flexarm 14″ – 72″ Tapping Machine with Multi-Position Head, RNRM20-4 Inventory # 8160 Made in USA Tapping Arm Tap Stand Multi-Position Head Semi-Automatic Tap Lubricator System Runs on 90 PSI Size 2 Quick Change ...

      Baltimore, MD
    23456

    Overview

    Threading and tapping machines are used in manufacturing to create threads inside holes (tapping) or on the exterior of components (threading). These machines are essential for producing threaded parts that fit together with screws, bolts, or other fasteners, ensuring precision and consistency in mechanical assemblies.

    FAQ

    What factors should I consider when buying a used threading or tapping machine?

    Consider the machine's age, condition, and maintenance history. Check for any signs of wear or damage and ensure it meets the specific threading and tapping requirements of your projects.

    How can I safely ship a threading or tapping machine?

    Use a reliable transport service that specializes in heavy machinery. Ensure the machine is securely fastened and properly protected to avoid damage during transit.

    What maintenance is required for threading and tapping machines?

    Regular maintenance includes lubricating moving parts, checking for wear and tear on essential components, and ensuring the machine's calibration remains accurate. Refer to the manufacturer's manual for a detailed maintenance schedule.