Machine Tools » Threading & Tapping » Ontario

Building Filters

133

Used Threading & Tapping in Ontario, Canada

  • Trusted Seller
    BRANDT 2HK-F Series Model 2HK-25F

    BRANDT 2HK-F Series Model 2HK-25F (25tonx2) Two Die Cylindrical Thread Rolling Machine with two moveable heads

    • Manufacturer: Brandt

    Equipped With > The 2HK-F series of hydraulic rolling machines are equipped with two rolling spindles, with two moveable moving heads > The machine have radial die loads, ranging from 1-25 Ton(10 to 250 kN) > The...

    Vaughan, Canada
  • Trusted Seller
    BRANDT 3R-21 TRC Series Model

    BRANDT 3R-21 TRC Series Model 3R-21 TRC (21Ton) 3-Die Cylindrical Thread Rolling Machine for Hot Rolling of Railway Bolts

    • Manufacturer: Brandt

    Equipped With > The 3R-21 TRC series of hydraulic rolling machines are equipped with three rolling spindles, & with three moving heads. > All machines equipped with PLC controls and AC Drives. > The machine have ...

    Vaughan, Canada
  • Trusted Seller
    REED A23

    REED A23

    • Manufacturer: Reed
    • Model: A23

    Equipped With Min. - Max. Threading Diameter (In-feed): 1/4" - 3-3/4" Min. - Max. Thread Diameter (Thru-feed): 1/4" - 1" Maximum Thread Length (In-feed): 2-3/8" Maximum Thread Length (Thru-feed): 11"

    Vaughan, Canada
  • Trusted Seller
    MACHINES & TECHNOLOGIES BBW

    MACHINES & TECHNOLOGIES BBW

    • Manufacturer: MACHINES & TECHNOLOGIES

    Equipped With THREAD ROLLING MACHINE TYPE BBW ? The upper die ? which is the longer one of the two dies ? is mounted on a movable slide. ? The lower, fi xed die is clamped into the height-adjustable die pocket by...

    Vaughan, Canada
  • Trusted Seller
    2013 TESKER 230

    2013 TESKER 230

    • Manufacturer: TESKER

    Equipped With Max. Threading Diameter Up To 2-1/2" * Spindle Speeds VARIABLE * Complete with Hydraulic Pump and Tank

    Vaughan, Canada
  • Trusted Seller
    REED A22

    REED A22

    • Manufacturer: Reed
    • Model: A22

    Equipped With Specifications for Diameter & Thread lengths are Infeed only

    Vaughan, Canada
  • Trusted Seller
    2002 KINEFAC MC-4

    2002 KINEFAC MC-4

    • Manufacturer: KINEFAC

    Equipped With Max. Threading Diameter (In-feed): 1-1/2" Max. Thread Diameter (Thru-feed): 3/4" Min. Diameter Infeed or Thrufeed: 1/32"

    Vaughan, Canada
  • Trusted Seller
    2021 GOVAMA HK25

    2021 GOVAMA HK25

    • Manufacturer: GOVAMA

    Equipped With Min. Threading Diameter (In-feed): 3 0.118) Max. Threading Diameter (In-feed): 48mm (1.889”) Maximum Thread Length (In-feed): 170mm (6.692") * Heavy duty 3”dia spindles * 7” Rexroth PLC control scre...

    Vaughan, Canada
  • Trusted Seller
    REED B105

    REED B105

    • Manufacturer: Reed

    Equipped With *In Feed and Thru Feed Capability *Quick setup features *Work support tooling on a fixed centerline *Hydraulically actuated *Direct drive motor/gearbox ass'y *AC inverter variable speed control *Equ...

    Vaughan, Canada
  • Trusted Seller
    GOVAMA Model ROT-1 (25ton)

    GOVAMA Model ROT-1 (25ton)

    • Manufacturer: GOVAMA

    Equipped With Specifications: Features: > The ROT-1 machine has been designed & produced to meet ball stud producers with high volume demand > There are total of 2 stations for different rolling forms. At station...

    Vaughan, Canada
  • Trusted Seller
    2007 VIDEX VAS-20BRH

    2007 VIDEX VAS-20BRH

    • Manufacturer: Videx

    Equipped With Machine setup for Radiator Hooks with a press in the center ** For production of bent bolts with threads on one end, such as eye bolts & anchor bolts >>Fully Automatic production from Wire Coil, Str...

    Vaughan, Canada
  • Trusted Seller
    VIDEX

    VIDEX

    • Manufacturer: Videx

    Equipped With * Fully Automatic Specialty Bolt Machines >> Single / Double End? U-Bolts, Eye Bolts, Anchor Bolts, Threaded Studs, Chamfered Parts and more * High Speed Planetary Thread Rollers * High Speed Nail R...

    Vaughan, Canada
  • Trusted Seller
    GOVAMA Model GPM-25C

    GOVAMA Model GPM-25C

    • Manufacturer: GOVAMA
    • Threading length: 150 millimeter

    Equipped With Specifications: Features: The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/4") either via the standard magazine feeder, or automated via straight...

    Vaughan, Canada
  • Trusted Seller
    2013 GOVAMA 3R-9

    2013 GOVAMA 3R-9

    • Manufacturer: GOVAMA

    Equipped With **Safety Features *All pinch points guarded with covers *All covers have coded magnet safety interlock switches *2 handed control for jog or automation process *System must be reset after e-stop act...

    Vaughan, Canada
  • Trusted Seller
    WATERBURY FARREL #10

    WATERBURY FARREL #10

    • Manufacturer: Waterbury Farrel
    • Model: 10

    Equipped With * Rotovane hopper Max thread diameter: 1/4" | Max thread & shank: 2" | Production: 60-600 ppm | Net weight: 4,000 lbs.

    Vaughan, Canada
34567

Overview

Threading and tapping machines are used in manufacturing to create threads inside holes (tapping) or on the exterior of components (threading). These machines are essential for producing threaded parts that fit together with screws, bolts, or other fasteners, ensuring precision and consistency in mechanical assemblies.

FAQ

What factors should I consider when buying a used threading or tapping machine?

Consider the machine's age, condition, and maintenance history. Check for any signs of wear or damage and ensure it meets the specific threading and tapping requirements of your projects.

How can I safely ship a threading or tapping machine?

Use a reliable transport service that specializes in heavy machinery. Ensure the machine is securely fastened and properly protected to avoid damage during transit.

What maintenance is required for threading and tapping machines?

Regular maintenance includes lubricating moving parts, checking for wear and tear on essential components, and ensuring the machine's calibration remains accurate. Refer to the manufacturer's manual for a detailed maintenance schedule.